Got this in the mail today from andrew-amanda.com…going to take a few beamshots tonight.
The only light that I was able pit against the EC4 was a XinTD V5 C8 with a U3 1A in it. Of course I knew it would be a little brighter but I didn’t realize it would throw a little further. I’m still impressed with the overall feel of the light, everything seems to work as it should and I haven’t had any problems with it other than a very minute piece of annodization is missing on the light. All button top batteries I’ve used in it have worked fine. Flat top batteries do work but they tend to rattle a bit so, lengthening the springs with needle nose pliers will probably do the trick. Both lights were tested using Efest 2500mah 18650 35A IMRs.
XinTD
EC4
XinTD
EC4
EC4 Left XinTD Right