US GB, LD-2 driver by led4power. One member hasn't received theirs yet, anyone else? Please chime in.

GB closed, all gone. Pm led4power for more or start another GB

I have a few 6V kits and moon kits. Enough 9A and 12A resistors. Gone pending. :_(

Lotus Darkrose 1 with moon. PD RCD

Kloepper Knife Works 2, 1-6V kit, 2 moon kits, 2-9A R’s, 2-12A R’s PD RCD

Shrike 2 with moon kits PD

Syracuse 1 with 6V kit, moon kit PD


Driver info thread

Original sales thread

Please check the sales thread for any mods/parts you want to include and please be clear about whether you want parts or a modded driver.

Moonlight parts 0.25$/set (for one driver)

2xLi-ion(“6V”) support parts 1.0$/set (for one driver)

Resistor for 9A or 12A mod 0.1$/piece

30AWG 200C silicone wire 0.5$/set (25cm RED + 25cm BLACK)
Great wire for e-switch and NTC connections,super-flexible and high temp. resistant (picture with 22AWG for size comparison)

Other(service offered by led4power)

Soldering moonlight and/or 6V parts fee 1.0$/driver

Changing/soldering max. current resistor fee 0.5$/driver

My Paypal address is scooterbuck(at)att.net replace (at) with @ and note your BLF name in the comments box. Be sure to select an option that is free to me since I’m not including any paypal fees here.

Add $1 to your order total for postage and mailer. You have until payments/owed reaches 80% at which time I will place the order and we will get what’s been listed.

Make sure to include any extras in both your order and payment.

Anyone want to join me in a US GB? Sending pm’s to Those who’ve expressed an interest. A bunch of pm’s sent. Also, think about any of the mod kit stuff you want so I can add that too. Texaspyro once suggested photo mailers and they work well and are pretty cheap. US is just the mailer and a stamp so $1 shipped. I’ll give this a few days then place the order for the boards. Let’s see if we can hit 50. As an example, 4 drivers (MOQ) is $67.60 or $70.60 with tracking, at 50 pcs GB the same order would be $53.60 plus$1 postage or $54.60. At 25 pcs it’s still only $57 for 4 and the price break is good down to one board(postage is still$1).
As soon as we hit 50 pcs I’ll set up payment info and when that gets to 80% I’ll place the order. Sound good? Any extra funds will be used to purchase extras in drivers and/or parts.

Currently @ ~ 110

Please check my math.

1. Me 10 w/5-6V kits, 5 moon kits, 5 9A R’s, 5 12A R’s, 4 wire kits

2. MG 2, $25.80+$1, $26.80 PD $27.80 RCD

3. KawiBoy1428 2-6A, 4-12A(6V), 4-9A(6V), $129 + 8(.10+$1.00+$1.00) + $1 = $146.80 RCD
Still Not sure about whether or not separate charges for 6V and 9A. May or may not be .50 more per 9A6V driver, but you’re covered either way. PD $160

4. Jhalb 1, 1 6V kit, moon kit,1 9A, 1 12A resistor, $12.90+$1.25.20+$1 , $16.35 PD $17 RCD

5. vinte77 2, $25.80+1,$26.80 PD RCD

6. Sparkey762 10, $129 PD $136 RCD

7. Ray-o-light 4 plus moon, $51.60+4(.25+$1)+$1, $56.60 PD $64.60 RCD

8. will34 3, $38.70, 2-5A,2(.1+.50), 1-6A6V, $1+$1, 3 sets wire, $1.50, $1 shipping, $44.40 PD $46.70 RCD

9. eebowler 2(1@3A) plus 2 moon kits and 1 set wires $25.80+(.50 .10.50.50+$1)=$28.40 PD $29.49($31 less $1.51pp fee) RCD

10. DavidEF 2, $25.80+$1, $26.80 PD $30 RCD

11. seasam 3 plus 2-6V kits and 3 wire kits $38.70+$2.00+$1.50+$1=$43.20 PD $44.70 RCD

12. DBCstm 10 plus 5 6V kits and 10 moon kits and 5-9A R’s , $129+$5+$2.50+.50, $140 PD $143 RCD

13. Hank 2 with moon added, $25.80+$2.50 +$1=$29.30 PD $33.30 RCD

14. n10sivern 4, 1-6V, 1 with moon, 3-9A R’s, 3-12A R’s, $51.60+$2+$1.25+.60+$1, $56.45 PD $56.45

15. raven38571 2,$25.80+$1, $26.80 PD $28 RCD

16. cabfrank 2 with moon added $25.80 + $2.50 + $1=$29.30 PD $31 CUSTOM

17. hell2pay 2 with 2 moonlight kits, $25.80+.50+$1=$27.30 PD $28.30 RCD

18. electricjelly 2 with moon added, $25.80 +$2.50+$1=$29.30 PD $30.30 RCD

19. smallerlights 4, 1 6A driver, $12.90, 1 6A driver with moon, $12.90+$1.25, $14.15, 1 6V 9A driver, 1 6V 9A driver with moon, $25.80+$4+$1.20, $31, Postage $1, $60.05, PD RCD

20. shrike3612 6 with moon kits, 2 sets wire PD

21. Jubeldum 10 with 10 6V kits, 10 moon kits, 10 9A, 10 12A resistors and 10 sets wire, $129+$10+$2.50+$2.00+$5.00+$1.00, $149.50 PD $155 RCD

22. scianiac 1 plus moon kit, 6V kit, 9A R, 12A R, $12.90 + .25+$1.00.1.1+$1, $15.35 PD $18

23. richnpc 1 plus moon kit and 2 sets wire, $12.90+.25+$1+$1,$15.15 PD $15.65 RCD

24. tristanxoxo 2, 1 with moon, 1-6V 9A with moon, $25.80($1.25.10+$1.50)$1.50, $31.40 PD $32.40 RCD

25. Bribo 4 plus 4 moon kits, 4 6V kits, 4-9A R’s, 4-12A R’s, Canuck postage, $51.60+$1+$4+.80+$1.50, $58.90 PD $60.78(63.50 less pp fee)

26. netprince 4 with moon, $51.60+4(.25+$1.00)+$1.00, $57.60 PD $65.29($67.40 less pp) RCD

27. mwfire 2 with 2 6V kits, 2 moon kits, 2-9A R’s, 2-12A R’s and 2 wire sets, $25.80+$2.50.40+$1+$1, $30.70 PD $31.70 RCD

28. B52 3, 1 with moon, 2 6V 9A with moon, $38.70+$1.25+$4.50+$1.20+$1, $46.65

Here’s the list I have generated from the entries in the op. There was a change in 9A drivers as I had misread a pm. The total number remains 110.

74 un-modded drivers
18 1-cell drivers with moon added
1 1-cell driver 3A
2 1-cell drivers 5A
2 2-cell drivers
5 2-cell drivers 9A
4 2-cell drivers 9A with moon
4 2-cell drivers 12A

44 moon kits
30 6V kits
26 9A R’s
21 12A R’s
27 wire sets

Awww hell, put me down for 4, one with 6v and moonlight. Now you are at 50. Wanna trade drivers for Cerakote? :bigsmile: Sorry, I had to ask!

Lots of things I’d consider bartering for but would prefer to trade effort for effort. 0:)

Out for the day, I’ll set up paypal into this evening. Please think about your orders and what all you want added. Since we reached the 50 PC mark price will be $13.40 for each driver plus any extras and add $1 to total for shipping.

I’m #8, qty change to 3.

2x Normal
1x 6V

2x wire kit
3x NTC sensor

2 x LD-2 $13.4 = $26.8 2 x Moon $0.25 = $0.50
Shipping @$1.00 = $1.00

Total $28.30 Correct?
I’ll be offline all night but will check in again tomorrow.

Thanks very much, Rufusbduck!

PP payment sent for $27.80.

That’s correct if you just want the moonlight parts included in the order. It’s $1 more each board or $30.30 total if you want the parts installed by led4power.

Paypal fees, vinte’s payment did not charge me but I don’t want to get blindsided.

Sent as money for a friend, so I ate the fees. Thanks Robert!!

I sent ya $140 Scott, oughta cover the mailing.

Thanks a heap!

Oh yeah, thanks Dale for reminding me!! Sent ya another 5 bucks Robert for shipping. Thanks again! :slight_smile:

Hey guys, thanks but shipping is included in the $1. That’s why I so like the photo mailers. Foam on either side of the boards in a hardened envelope.

Tips?

Do you think those will be sufficient to protect assembled drivers? Now that I think about it though, with no wires they’ll be flat, as long as they don’t have the wires I guess they’d be fine. Carry on…

No wires, no springs, very flat and sandwiched in foam. Should be fine. You paid extra though so if you want a bubble mailer I have some, they just cost more than a stamp to send.

I would imagine that 10 drivers weighs more than an ounce anyway, so a stamp isn’t going to get it done.

Totally up to you. I use the Small Flat Rate box for everything I send out that will fit, be it a single driver or several small lights. Tracking, insurance and 2 day delivery. :wink: $5 won’t buy dinner at my fav Mexican food restaurant.

Is the NTC sensor included with the driver, or can I just add $1 for each until we get a response from led4power?

--------------------------

Edit: led4power confirmed each driver comes with NTC sensor.

[quote=led4power] NTC is included with each driver by default,BTW i answered to some questions in Sale thread,I would like to know which "DIY parts" option would be best for buyers. [/quote]


PP sent for 3 drivers with options, thanks!

Other than usage and placement there’s not much into on the NTC in terms of specs.