US GB, LD-2 driver by led4power. One member hasn't received theirs yet, anyone else? Please chime in.

Rufusbduck · June 10, 2015, 12:39am

I’ll make sure we get to 100 one way or another.

DavidEF · June 10, 2015, 1:01am

Yeah, you caught me. I’m waiting on Friday (payday) to come. :shy: But, just ’cause I’m slow, it don’t mean I can’t be generous!

jhalb · June 10, 2015, 3:42am

I know all these purchases really catch up right?

DB_Custom · June 10, 2015, 4:13am

I just stumbled across a light at Banggood that looks like a very good candidate for one of these 6A drivers. Nice cooling fins, SS bezel, supposedly type III ano and 26650 battery size. And it even looks to me like the spring on the switch is factory wire bypassed! I had to order one just to find out, lol.

XR55 with XM-L2 emitter in choice of warm white or cool white. Am I crazy or does this look like a pretty potent little light? It sure would be at some 1500-1700 lumens!

Rufusbduck · June 10, 2015, 4:23am

This one had me going in circles, lol.

DB_Custom · June 10, 2015, 4:29am

Google Spreadsheet, the only way I can keep up with names and postings in a giveaway.

I bet a payment coming in from a name not on the list could surely wreak havoc, especially after a long day…

KawiBoy1428 · June 10, 2015, 4:29am

Looks like an L5 http://www.banggood.com/Convoy-L5-CREE-XM-L2-U2-1A-2-Group-3-or-5-Mode-1000LM-LED-Flashlight-p-916741.html

KawiBoy1428 · June 10, 2015, 4:33am

Rufus PM’d you about changing the (4)7amp drivers to 12amp 6volt, is it still do able?

Rufusbduck · June 10, 2015, 4:46am

Check the op. I’ve been checking pp and pm’s and updating for the last hour.

Rufusbduck · June 10, 2015, 4:50am

I’m organizationally challenged. Probably not the most reassuring admission.

KawiBoy1428 · June 10, 2015, 4:50am

Cool!! Thanks Scott! Sending P.P.

Rufusbduck · June 10, 2015, 4:52am

As far as I know it’s up to date, but given the above post I’m counting on each of you to verify what I have down for you as well as the cost. I’m good with numbers except when I’m not.

Rufusbduck · June 10, 2015, 4:59am

Guys, if you’re close you probably don’t need to send any extra funds since I’m making sure we get to 100. That’s a $45 slush amount right now not including the extra squeeze you guys have been sending. I haven’t even looked at that total. If you’re willing, I’d still like to do a giveaway with at the very least a driver and decent host and maybe a cerakote job.

Jubeldum · June 10, 2015, 5:52am

http://www.edc-light.com/top-quality-oem-e2-haiii-1x26650-flashlight-host-kit-for-cree-xml-t6-xhp50_p0932.html

+$5 for extension.

Bribo · June 10, 2015, 6:30pm

Paypal sent for

4x driver 13.40
4x(Moonlight parts 0.25$/set)
4x(“6V”) support parts 1.0:money_mouth_face:
4x (Resistor for 9A .10)
4X Resistor for 12A mod 0.10$/piece
Canadian Shipping $1.50
=$14.85*4+1.5

=$60.90

Thanks for organizing and especially for including us Canucks !

Rufusbduck · June 10, 2015, 6:56pm

You’re welcome, I’d expand it further but would rather not overextend and run into “Peter Principle” Problems.

netprince · June 11, 2015, 3:37am

I hope I’m not too late…

4x drivers $53.60
4x moonlight parts $1.00
4x soldering moonlight parts $4.00
shipping $1
tip $5

Please let me know if something is incorrect, sending paypal in a minute…

Rufusbduck · June 11, 2015, 3:39am

Nope, you’re not too late. I’m invoicing a job this evening and will begin to put together an order sheet when that’s done.

KawiBoy1428 · June 11, 2015, 9:24am

3. KawiBoy1428 2-6A, 4-12A(6V), 4-9A(6V), $134 + 8(.10+$1.00+$1.00) + $1 = $151.80
Still Not sure about whether or not separate charges for 6V and 9A. May or may not be .50 more per 9A6V driver, but you’re covered either way. PD $160 Thanks Scott!!

n10sivern · June 11, 2015, 11:31am

I just paid. I completely forgot about this until this morning. 4 drivers, one 6V, one moonlight, plus shipping. I added in money for 3 9A and 3 12A resistors if that’s not a problem.