New XP-L High Intensity Emitter

ok

i read pdf carefully but a lot of Chromaticity table that cree release

which luminous bin affected by them but just i must know they color temperature

and brightness in my job they important for me the cree table have a lot of Chromaticity

that who work for art lighting use to show the work of art in own scenes

or who that brighten area in art lighting like coloration illumination

did you buy cree led with this sheet completely

If you are lighting up artwork, you will want a high Cri output like 98cri

yes you told exactly

may be require more cri output like 99cri that is important to show the artwork to become more with integrity

The thing is that you can buy for example a XP-L that has a 65CRI and 1T tint, yes a lot of brightness but the tint will be bad, CRI not even worth talking about at that tint (1T).

But for that maybe you would be looking into CXA LEDs rather than XP-L LEDs.

we must be wait until cree release new led with extra brighness and high cri and tint but cree just

point at one thing in each product or they cant gather all features in one led and show that serve as one end updated product like cri=99 or 300 lpw or high tint or ;;;;;;;;;;;;;;;;;;;;;

or their polices is to show developments serially

always we search about high ended products

Back to the XP-L HI, I was supposed to have some coming but I received regular XP-L’s on accident. Those got returned so now back to waiting for the HI’s to be stocked again.

That sucks. All that waiting.

why cree show xp-l luminous more than xp-l hi in their first sheet

but in publicities they say xp-l hi have double in performance and luminous instead of xp-l

this is rather xp-l put 1226 lumen and xp-l hi put 1095 lumen in 10 watt consume

it is a little doubtful in their speech

which we belief to the sheet or the publicities?

candela value is different which they refer as double perfomance, not lumen value

So Mouser has these in stock , has anyone actually built one yet? I am thinking of doing a C8 I have with the Comfychair inspired FET mod on a single 18650. Would it be worth it to run this on two 18350’s for the higher voltage with the correct driver?

Sorry to hear that.

At least Mouser has them in stock now, so it should be only a matter of time before they show up all over the place :slight_smile:

Thanks for the tip. Just ordered some 4000k and 5000k from Mouser. :slight_smile:

Same here. Should be good for the upcoming BLF Ti ReyLight.

I see Mouser’s stock of these is going down as we speak.

Someone needs to order 12 of them and stick them in their M43

Had an email from Cutter last week to say that they would be shipping within two weeks, lets hope that they start shipping this week! Cannot stand the waiting :frowning:

I have a 5000k one on the way to me at the moment.

It’s going in an XinTD C8 with the new LD-2 driver.

How do you decipher those part numbers? XPLAWT-H1-0000-000BU40E5 the E5 means it can be any of the 5 bins, right? That matches the given 4000k temperature.

Any of the 5B 5C 5A 5D tints, they are all sub-categorized like this 5B1 5B2 5B3 5B4

U4 bin - 886 lumens at 3A

70CRI

You lucky dog. :slight_smile: