The thing is that you can buy for example a XP-L that has a 65CRI and 1T tint, yes a lot of brightness but the tint will be bad, CRI not even worth talking about at that tint (1T).
But for that maybe you would be looking into CXA LEDs rather than XP-L LEDs.
we must be wait until cree release new led with extra brighness and high cri and tint but cree just
point at one thing in each product or they cant gather all features in one led and show that serve as one end updated product like cri=99 or 300 lpw or high tint or ;;;;;;;;;;;;;;;;;;;;;
or their polices is to show developments serially
always we search about high ended products
Back to the XP-L HI, I was supposed to have some coming but I received regular XP-L’s on accident. Those got returned so now back to waiting for the HI’s to be stocked again.
That sucks. All that waiting.
why cree show xp-l luminous more than xp-l hi in their first sheet
but in publicities they say xp-l hi have double in performance and luminous instead of xp-l
this is rather xp-l put 1226 lumen and xp-l hi put 1095 lumen in 10 watt consume
it is a little doubtful in their speech
which we belief to the sheet or the publicities?
candela value is different which they refer as double perfomance, not lumen value
So Mouser has these in stock , has anyone actually built one yet? I am thinking of doing a C8 I have with the Comfychair inspired FET mod on a single 18650. Would it be worth it to run this on two 18350’s for the higher voltage with the correct driver?
Sorry to hear that.
At least Mouser has them in stock now, so it should be only a matter of time before they show up all over the place 
Thanks for the tip. Just ordered some 4000k and 5000k from Mouser.
Same here. Should be good for the upcoming BLF Ti ReyLight.
I see Mouser’s stock of these is going down as we speak.
Someone needs to order 12 of them and stick them in their M43
Had an email from Cutter last week to say that they would be shipping within two weeks, lets hope that they start shipping this week! Cannot stand the waiting 
I have a 5000k one on the way to me at the moment.
It’s going in an XinTD C8 with the new LD-2 driver.
How do you decipher those part numbers? XPLAWT-H1-0000-000BU40E5 the E5 means it can be any of the 5 bins, right? That matches the given 4000k temperature.
Any of the 5B 5C 5A 5D tints, they are all sub-categorized like this 5B1 5B2 5B3 5B4
U4 bin - 886 lumens at 3A
70CRI
You lucky dog.
Mouser again :tired: (shipping of 25 dollar per order is making me not buy these now). Anyone care to send me two for testing? (I will pay for costs and shipping in a plain envelope without tracking)
Can Cutter do them, and will postage from the colony of Australia be cheap enough?
Cutter dont have stock yet. They will probably arrive when I'm away for 5 weeks. If I'm here I'd be more than happy to send a couple over.