BLF Kronos X6/X5 GB - Group Buy now closed.

One set of SS/Copper (SS/Cu) in NW please.

Hi Bugsy36 & ReManG, sorry for the trouble - I already requested number 13 (Set 1 - Cu/SS & Al) way back in post #62 before Krono left. Djozz confirmed swap (for Al list) in post #236.

Also I was already number 31 (set 2) in the Aluminium list until MaleNurse was added by you. So Nguyen kindly agreed to swap with me in post #193 so that the position was returned. (I tried to let you know in post #197 & #216 but you might have missed them.)

Please can you add their swap requests as well as mine into the lists so that they all tie-up with request & approval.

Many thanks as always,

Hirsh

Assigned serial numbers… major can of worms. I don’t even want to think about how that’ll go when the products get far enough to purchase, or how the retailer will get the right unit to the right person.

You are brave for even attempting this. :slight_smile:

I never thought about the seller to buyer aspect of that lol…. that could be bad.

Oh. Hm. Argh.

One set, black HA3.

That’s what I think, don’t think the shippers will be able to handle this correctly and send out the correct serial numbers but I hope they do.

The Maratac copper AAA light my friend has tarnish's quickly, plus the SS lights I modded get super hot (TrustFire F35, etc.). But... these will be classics, one-of-a-kinds, and I trust the team to ensure the quality is there, so I think this deal can't miss, as long as it can get done. If they do end up to be all or mostly SS, and all or mostly copper, they will be hefty for sure, but will make them feel like quality as well.

For the X6, I'd prefer some SS on the bezel and tail, rather than the whole body - much better for heat sinking, but still an X6 all in SS would sure be a sight...

Copper tarnishes quickly, but it looks really nice in tarnished form and the tarnish can be removed fairly easily. I can generally just rub my finger over it for a few minutes and it’ll mostly restore the original color (though to make it shiny, actual polishing is needed). It doubles as a fidget widget or a worry stone. Recessed areas will stay darker, but that also kind of adds to the aesthetics.

I.like my copper lights shiney. A few minutes in ketchup and they look brand new!

I don’t know why I thought I was going to be able to not buy a set of these. Put me down for one of the Aluminum sets in NW.

Please add me to the list for the following:

1) SS/Copper (SS/Cu) Set
2) NW
3) Qty: 1

Thanks for putting this together.
Shadowfax

Assigned serial numbers? 300 lights, some of you will be lucky to get flashlights.

cereal numbers more likely

Question… and I hate asking it. Are we looking at 3 months, 6 months, or more? I am very patient, but if this arrives after Christmas, it’ll be a no go for me.

Being lured into the swapping madness :-), ReManG requested a swap amd that's fine with me: please swap my (just acquired ) #15 with his #7.

Think of the bitter disillusion after the swapping dust settles and then folks receive a different number.

Krone mentioned that it will finish just in time for Christmas.
He did not mention which Christmas.

Guys, this is krono’s GB. Any decision to swap places around on the list will have to be made by him. He is not here right now, so bugsy has been keeping up with the list, but has already stated that he is NOT going to make any position swaps! Please understand. When krono gets back, you can ask him. But please stop spamming the thread with requests to be switched around. Thanks! :slight_smile:

Well I’ll cross my fingers it’ll be done before then!

Hey bugsy, I just realized that in your SS/CU list, you have DBCstm at number three. Perhaps you should change it to his new name DB Custom?