FWIW, many cities have laser-engraving services… so you could also get whatever you want engraved onto each light.
I’ve been really tempted to add “Carpe Noctem” to some of mine.
FWIW, many cities have laser-engraving services… so you could also get whatever you want engraved onto each light.
I’ve been really tempted to add “Carpe Noctem” to some of mine.
I’ll take mine engraved:
Carpe Snooz’em
or if that’s not available
Carpe Peeum
I still like my tacky shirt I use to work out and walk around in: “Si hoc legere scis, nimium erudition habes”
I’m in.
1) SS/Cu set
2) LED
X6-SE v2 SS : XP-L HI WW
K6 Cu : XP-L HI NW
3) 1 set
Thanks
1) Aluminum (Al) set
2) NW
3) 1
Thank you
Anyone stopped you yet complaining about the spelling on your T?
Hate my self…cannot resist
One set SS/Cu NW
Ps no more GBs pls
/Ievel
Education, or knowing things, is like having flashlights. You can never have to much. And it doesn’t all have to be the high-end stuff.
Knowing how to make an excellent 5 alarm chili on a cold winters day can be CRUCIAL! Just like knowing exactly how much Vodka to pump into the watermelon on a hot summers day….
.
Dale,
You have stated recently that you use your somewhat older or less capable 18650s in your kids lights.
I have to ask: Are you accepting any more applicants for Kids?
5 alarm Chili, Vodka, Free lights and Batteries…I’m Your Boy!
Kindly Say YES, and lets make this a done deal!
BTW, I am 66yrs old, is this gonna matter to you?
I am already semi housebroken, if that counts for anything.
Thanks for your consideration!!!
-Your Very Possible Future Son, Chuck
.
Nice Deal (again)
I will be in with Copper and SS in NW
Thanks a lot
Updated to Post #276
Please note: This is the best I can do with the list so far. PLEASE understand that I did not do anything with "preferred" placement except for SS/Cu and AL HAIII
SS/Cu @$80 need 200 sets minimum
Because Kronos is unavailable.....
I have to inform everybody that the XPL Hi WILL be available but I do not know what tints will be available. The availability of specific tints up to now really sucks and being able to source 500-1000 pieces is difficult so while if someone prefers the XPL Hi in a certain tint please understand that at "go time" they may be unavailable.
Nah...don't hate yourself...that is unproductive. I think the large custom group buys for this year are coming to a close for receipt by the Christmas season but there is always next year that needs to get started on :)
Hopefully 5700k tint for XPL HI, stoked that it’ll be an option, will it also be driven as hard?
Wow. These group buys are amazing.
The driver is an FET +1, meaning the lower modes are run on a single 7135 chip for efficiency and the upper 3 modes have the FET driving direct drive… well dd for Turbo mode. So yes, the lights will be driven as hard as whatever emitter lands in em can do.
PWM to lower the mode is not normally efficient on an FET driver as it is having to control that modulation from the full amperage of the driver. So if we’re pulling 6A then moon is modulated from that 6A. The FET +1 driver uses that single 7135 to run moon and the next 3 levels so that only 380mA is modulated, much more efficient and a LOT less heat burned off. ToyKeeper wrote the firmware to use percentages of the chip plus the mosfet in the middle modes to optimize this efficiency, creating a well spaced group of modes that are as pleasing to the cell as to our eyes. That is what makes this so special, and with the reversing feature in use on a regular tail clicky, very unique as well.
Thought I’d throw that out there for those that are new to the A6 firmware from TK. I LOVE this driver! (driver a design of Wights, who is on hiatus at the present time.) I even have a 10mm variant of it in my Titanium Texas Poker you see in my Avatar. It’s a 10440 cell light that pulls a little over 3A for 1117 lumens. Even as a twisty, the reversing feature still works and I have the hidden modes and batt check. Gotta love it!
Point being, the small 14500 K6 will be as kick butt as that cell size can deliver, and it’ll be a worthy sidekick to the larger 18650 X6 to be sure. Epic!
One HAIII AL WW set please! I had signed up already, but my reply must have gone unseen.
This sounds great! I finally have a chance at owning an original BLF X6.
Only need 26 more for Aluminum.
I’m sure there will be more into the list of SS/Cu once the samples are ready. Come on guys this is a SPECIAL light!!
One HAIII AL WW set please! I had signed up already, but my reply must have gone unseen. This sounds great! I finally have a chance at owning an original BLF X6.
See slot 55 :)