BLF Kronos X6/X5 GB - Group Buy now closed.

[chuckhov]

I like most anything that has an A or a D. - B and C are both too yellow/green to me.

I have the Red Convoy S2+ in 4C, and though I love the Convoy, the tint is a bit too yellow to suit me.

I really like 3D.

Thanks, and to each their own:-)

-Chuck

[Jubeldum]

3D or 3A if 3D is unavailable.

[UliBär]

@UliBär

(…) Depending on the actual chosen tints, it will be NW or WW, preferably in the 4D-5A range! (…)

In my opinion the best neutral tints are 3D, 4A, 4D and 5A2. Any of these will do but 5A2 is the best!

[edit] Basically the tints in that range but below the BBL

[chuckhov]

@Jubeldum

3D or 3A if 3D is unavailable.

YES!!!

-Chuck

[B42]

4C is great, 3D, 4A, 4D and 5A2 are all good too (prefer 4D since I don’t have one and A6 is going to be 3D). Anything other than 3C really is my preference if we can get it, its been done to death.

[Ievel]

Hey Krono,

Could you remove me #79. Have to prioritize other expenses.

Thanks in advance

/Ievel

[LSX]

3D tint for sure!

[djozz]

Anything 80 CRI for the warm/neutral tint ?

(Hank is able to source it, so perhaps Manker too?)

[KeepingItLight]

Please add my name to the group buy for the BLF X6-SE v2.

1) Aluminum (Al)
2) Tint – NW
3) Quantity – 1 set

Thanks!

I prefer working flashlights, but if that is not possible, PM me, and I will engage you in a lengthy discussion about serial number. Gotta have one or the other.

[KeepingItLight]

Not sure what others think, but I find the name of this thread to be cluttered and hard to spot in the BLF Recent Posts list. FWIW, I suggest reversing the order, and adding an en-dash:

BLF X6-SE v2 GB Interest List – GB Comment Edited ##8/3/15##

[MountainMan]

1 set SS/Cu NW please!

[chuckhov]

@KeepingItLight

Not sure what others think, but I find the name of this thread to be cluttered and hard to spot in the BLF Recent Posts list. FWIW, I suggest reversing the order, and adding an en-dash:

BLF X6-SE v2 GB Interest List – GB Comment Edited ##8/3/15##

I agree - One day it was changed, and if I had not been subscribed, probably would have missed it.

Thanks!
-Chuck

[ohaya]

@chuckhov

@KeepingItLight

Not sure what others think, but I find the name of this thread to be cluttered and hard to spot in the BLF Recent Posts list. FWIW, I suggest reversing the order, and adding an en-dash:

BLF X6-SE v2 GB Interest List – GB Comment Edited ##8/3/15##

I agree - One day it was changed, and if I had not been subscribed, probably would have missed it.

Thanks!
-Chuck

Same here - couldn’t see it w/o subscription.

[kronological]

@KeepingItLight

Not sure what others think, but I find the name of this thread to be cluttered and hard to spot in the BLF Recent Posts list. FWIW, I suggest reversing the order, and adding an en-dash:

BLF X6-SE v2 GB Interest List – GB Comment Edited ##8/3/15##

Good suggestion. Done.

[seasam]

Please remove me from the SS/Cu list #6, but keep me at #57 on the Al list. Thank you.

[ahirshy]

@seasam

Please remove me from the SS/Cu list #6, but keep me at #57 on the Al list. Thank you.

I'll gladly fill in seasams's vacant slot (no rudeness intended )!

Please add me for another Cu/SS pair at position 6 to replace seasam.

Many thanks as always,

Hirsh

[SmokinH]

I’ll take one of both SS/Cu and HAIII in NW at same spot on both.

[DB_Custom (Dale)]

A simulated preview, here’s a look at pretty much what we’re looking at in this group buy.

The Cu light is real, some liberties were taken by me to show the comparison of the two lights. I tried real hard to keep it “real”.

The photo that was provided of the sample was fresh off the lathe and needed cleaning up, but man these look good to me! :bigsmile:

[Serifus]

I can already see a triple nichia going in the cu mini.

[chuckhov]

Damn Dale!

Not too bad…Not bad at all!

I should start a thread about Fake Stainless X6’s now:-)

Nice Work!

After I get to see the real SS, I ‘might’ have to join that list too:-(

Thanks A Lot!
-Chuck