ReManG
(ReManG)
August 8, 2015, 9:43pm
23
I knew you would show up eventually…. LOL, surprised it took this long…
If this goes off and we can get the part, Manker will have a great standing in my book, they seem to really want to do for us…
I should know more early next week on their response and will update here of course…
ReManG
(ReManG)
August 8, 2015, 9:47pm
24
Corrected, misread your comment. I will update the price as soon as I get one…
And one for me, as I am in for one BLF Manker A6 SE.
Thank you!
chuckhov
(chuckhov)
August 8, 2015, 9:54pm
27
For those that are new to the 18350 scene, these are some mighty fine cells for this setup.
Or button top, if you prefer:
Thanks again ReManG - You Are Da Man!
-Chuck
cabfrank
(cabfrank)
August 8, 2015, 9:55pm
28
I would definitely take two. Possibly3-4. Thanks
Blinky1
(Blinky1)
August 8, 2015, 10:18pm
30
This is a great idea! :party:
1 for me please!
cabfrank
(cabfrank)
August 8, 2015, 10:31pm
32
Just a quick note before this thread gets too long, no capitals in my user name for #’s 31 & 32. Thanks.
Halo
(Halo...)
August 8, 2015, 11:14pm
33
GB lists usually serve just to PM the GB members.
Capitalization does not matter for PM, only correct spelling. Try PMing yourself.
DavidEF
(DavidEF)
August 8, 2015, 11:15pm
34
ReManG:
Muto:
I’d do 3 if at $5 or less.
Only problem that may likely happen is the color may not match perfect to the other complete BLF A6 Flashlights.
Different batches, different lots.
Some members get hissy over colormatch issues, so it probably should be listed as “you get what you get, no crying paypal dispute after the fact”
Later,
Keith
Yes, it would be the same as the A6, but with anodizing, it is hard to hold the same color. It would have to be close, but not perfect. There would of course be a “what you get, is what you get for color” clause. Good point Muto
Oh, I’m on the A6 list for both the Cool White and the Cool-Neutral White emitters, so if it’s not too much trouble, I’d like one of my 18350 tubes to be Cool Black and the other to be Cool-Neutral Black!
B42
(B42)
August 8, 2015, 11:19pm
35
Moi aussi s’il vous plait!
ahirshy
(ahirshy)
August 8, 2015, 11:24pm
38
Great idea - exchangeable battery tube sizes; Something I always thought was logical for many commercial lights which seem to share the same ‘head’.
I previously detailed it here: NEW EagleTac D25C & D25A Ti - *2015 Edition* with regards to EagleTac and Nitecore, who could have done the same with most of their offerings within a model range.
Please put me down for two. Would it also be feasible to include a small plastic spacer tube to pad the more common 16340/RCR123A so they can also be used without rattle in the 18350 tube. (Similar to that which came with the NC EC11).
I’d pay the extra dollar (if even that much) which it would cost to produce and include such a spacer.
Hirsh
ReManG
(ReManG)
August 8, 2015, 11:25pm
39
DavidEF:
ReManG:
Muto:
I’d do 3 if at $5 or less.
Only problem that may likely happen is the color may not match perfect to the other complete BLF A6 Flashlights.
Different batches, different lots.
Some members get hissy over colormatch issues, so it probably should be listed as “you get what you get, no crying paypal dispute after the fact”
Later,
Keith
Yes, it would be the same as the A6, but with anodizing, it is hard to hold the same color. It would have to be close, but not perfect. There would of course be a “what you get, is what you get for color” clause. Good point Muto
Oh, I’m on the A6 list for both the Cool White and the Cool-Neutral White emitters, so if it’s not too much trouble, I’d like one of my 18350 tubes to be Cool Black and the other to be Cool-Neutral Black!
LOL, I will make sure they are the correct color for each emitter sir… and the free brown grease packed inside each tube is for ALL of your flashlights… It will make the threads slicker than, well… you know…. :bigsmile: J)
ReManG
(ReManG)
August 8, 2015, 11:27pm
40
ahirshy:
Great idea - exchangeable battery tube sizes; Something I always thought was logical for many commercial lights which seem to share the same ‘head’.
I previously detailed it here: NEW EagleTac D25C & D25A Ti - *2015 Edition* with regards to EagleTac and Nitecore, who could have done the same with most of their offerings within a model range.
Please put me down for two. Would it also be feasible to include a small plastic spacer tube to pad the more common 16340/RCR123A so they can also be used without rattle in the 18350 tube. (Similar to that which came with the NC EC11).
I’d pay the extra dollar (if even that much) which it would cost to produce and include such a spacer.
Hirsh
Wont hurt to ask, and that seems like a great idea about the spacer. I have used skinny O-rings, but they come off and like to fly away…
Thanks
chuckhov
(chuckhov)
August 8, 2015, 11:35pm
41
Manker might get pissed with us if not for all the business this and out Sister GB is going to bring them.
Work with BLF and the Future is Yours!
Time marches on, and with it’s passing comes Progress!
We are Not Joe Six Pack , that thinks that he needs a flashlight and so buys “one”.
NO! - We have sense enough to know that We NEED Many, MANY lights, most of which have not yet been conceived.
Manker: Provide us with what we want/need, and we’ll Be Back!
Of this I am certain!
Thanks,
-Chuck
Muto
(Muto)
August 8, 2015, 11:38pm
42
DavidEF:
ReManG:
Muto:
I’d do 3 if at $5 or less.
Only problem that may likely happen is the color may not match perfect to the other complete BLF A6 Flashlights.
Different batches, different lots.
Some members get hissy over colormatch issues, so it probably should be listed as “you get what you get, no crying paypal dispute after the fact”
Later,
Keith
Yes, it would be the same as the A6, but with anodizing, it is hard to hold the same color. It would have to be close, but not perfect. There would of course be a “what you get, is what you get for color” clause. Good point Muto
Oh, I’m on the A6 list for both the Cool White and the Cool-Neutral White emitters, so if it’s not too much trouble, I’d like one of my 18350 tubes to be Cool Black and the other to be Cool-Neutral Black!
DavidEF,
You are messed up!
I mean that in the best way.
Maybe the tube tint should be 18350-CB (Cool Black), 18350 C-NB and maybe 18350-WSGB (Warm Semi-Gloss Black)
Or we could have Sparkle Black with glow in the dark flakes in the paint for the kids.
Ohhh, and one more small thing, I’d like mine to be serialized, I need 69, 13, and 666!
Later,
Keith