And one for me, as I am in for one BLF Manker A6 SE.
chuckhov
August 8, 2015, 9:54pm
27
For those that are new to the 18350 scene, these are some mighty fine cells for this setup.
Or button top, if you prefer:
Thanks again ReManG - You Are Da Man!
-Chuck
cabfrank
August 8, 2015, 9:55pm
28
I would definitely take two. Possibly3-4. Thanks
Blinky1
August 8, 2015, 10:18pm
30
This is a great idea! :party:
1 for me please!
cabfrank
August 8, 2015, 10:31pm
32
Just a quick note before this thread gets too long, no capitals in my user name for #’s 31 & 32. Thanks.
Halo
August 8, 2015, 11:14pm
33
GB lists usually serve just to PM the GB members.
DavidEF
August 8, 2015, 11:15pm
34
ReManG:
Muto:
I’d do 3 if at $5 or less.
Later,
Yes, it would be the same as the A6, but with anodizing, it is hard to hold the same color. It would have to be close, but not perfect. There would of course be a “what you get, is what you get for color” clause. Good point Muto
Oh, I’m on the A6 list for both the Cool White and the Cool-Neutral White emitters, so if it’s not too much trouble, I’d like one of my 18350 tubes to be Cool Black and the other to be Cool-Neutral Black!
B42
August 8, 2015, 11:19pm
35
Moi aussi s’il vous plait!
ahirshy
August 8, 2015, 11:24pm
38
Great idea - exchangeable battery tube sizes; Something I always thought was logical for many commercial lights which seem to share the same ‘head’.
I previously detailed it here: NEW EagleTac D25C & D25A Ti - *2015 Edition* with regards to EagleTac and Nitecore, who could have done the same with most of their offerings within a model range.
Please put me down for two. Would it also be feasible to include a small plastic spacer tube to pad the more common 16340/RCR123A so they can also be used without rattle in the 18350 tube. (Similar to that which came with the NC EC11).
I’d pay the extra dollar (if even that much) which it would cost to produce and include such a spacer.
ReManG
August 8, 2015, 11:25pm
39
DavidEF:
ReManG:
Muto:
I’d do 3 if at $5 or less.
Later,
Yes, it would be the same as the A6, but with anodizing, it is hard to hold the same color. It would have to be close, but not perfect. There would of course be a “what you get, is what you get for color” clause. Good point Muto
Oh, I’m on the A6 list for both the Cool White and the Cool-Neutral White emitters, so if it’s not too much trouble, I’d like one of my 18350 tubes to be Cool Black and the other to be Cool-Neutral Black!
LOL, I will make sure they are the correct color for each emitter sir… and the free brown grease packed inside each tube is for ALL of your flashlights… It will make the threads slicker than, well… you know…. :bigsmile: J)
ReManG
August 8, 2015, 11:27pm
40
ahirshy:
Great idea - exchangeable battery tube sizes; Something I always thought was logical for many commercial lights which seem to share the same ‘head’.
I previously detailed it here: NEW EagleTac D25C & D25A Ti - *2015 Edition* with regards to EagleTac and Nitecore, who could have done the same with most of their offerings within a model range.
Please put me down for two. Would it also be feasible to include a small plastic spacer tube to pad the more common 16340/RCR123A so they can also be used without rattle in the 18350 tube. (Similar to that which came with the NC EC11).
I’d pay the extra dollar (if even that much) which it would cost to produce and include such a spacer.
Wont hurt to ask, and that seems like a great idea about the spacer. I have used skinny O-rings, but they come off and like to fly away…
Thanks
chuckhov
August 8, 2015, 11:35pm
41
Manker might get pissed with us if not for all the business this and out Sister GB is going to bring them.
Work with BLF and the Future is Yours!
Time marches on, and with it’s passing comes Progress!
We are Not Joe Six Pack , that thinks that he needs a flashlight and so buys “one”.
NO! - We have sense enough to know that We NEED Many, MANY lights, most of which have not yet been conceived.
Manker: Provide us with what we want/need, and we’ll Be Back!
Of this I am certain!
Thanks,
Muto
August 8, 2015, 11:38pm
42
DavidEF:
ReManG:
Muto:
I’d do 3 if at $5 or less.
Later,
Yes, it would be the same as the A6, but with anodizing, it is hard to hold the same color. It would have to be close, but not perfect. There would of course be a “what you get, is what you get for color” clause. Good point Muto
Oh, I’m on the A6 list for both the Cool White and the Cool-Neutral White emitters, so if it’s not too much trouble, I’d like one of my 18350 tubes to be Cool Black and the other to be Cool-Neutral Black!
DavidEF,
You are messed up!
Ohhh, and one more small thing, I’d like mine to be serialized, I need 69, 13, and 666!
B42
August 8, 2015, 11:42pm
43
One of mine is a gift for a girl who would love Cool Sparkle Black Rainbow Glitter plz.
Gunga
August 8, 2015, 11:46pm
44
I’m in for 3. Can they be non-anodized?
