I would like a blf trower . Personally i like the 3 x 18650.
It gives you more runtime so you dont need to swap battery’s every 2 minutes especially with a high amp led xD
Courui D01 is already a budget thrower and uses 3x 18650 in parallel for long run time. It has been modded lots of times successfully by different people. What I’d like to see, if a BLF Courui D01-SE is born, would be a FET +1 7135 driver with TK’s A6-SE firmware, a XPL High Intensity emitter, and better wiring throughout (tail-cap wiring is currently quite stupid) to keep the amps high to the emitter.
I’m already a big fan of my thrunite tn31, so a big headed flashlight is no problem for me. It’s kind of fun to bring out the big boy and watch everyone else’s jaw drop in awe.
^ +1 on Every David just said.
I already planned on a D01 anyhow… if I can pay a wee bit more and get a much improved light pre-modded to BLF preferences, all the better!
+1 but with 86mm reflector from kaidomain. That would be my Dream with a driven Hard XHP-70 i know it would not be very throwy with this LED but a Monster
Is there ANY that size? I’m thinking about the Maxtoch 2X
Its 68mm dia
Now I think the issue would be either to run a GB for light with the Acebeam K40 kinda build or the plunger styled lights…
.
What you have just described is EXACTLY what I want, David!
I have an Acebeam K40M and it needs a THROWY partner:-)
Thanks!
-Chuck
+2 :bigsmile:
Oh yeah, just remembered - the Courui D01 needs a better thermal path from the emitter. The thin pill/plate that is used in the stock light is not going to work for a hot-rod mod! Some guys have already in the past made and sold replacement pills for this light, so we at least know what we need already. 
So, if we’re in agreement about the BLF Courui D01-SE group buy, who’s gonna be the one to get it going? 8)
Well, I for one like the way you’re thinking, so How About You, David?
Thank you very much!
-Chuck
Ha-Ha-Ha-Ha-Ha-Ha! 
Oh wait. You’re serious? 
Sorry, haven’t got the time. If I did have any spare time right now, I’d be working on my contest light. 
I have been wanting a GB for a Thrower. It seems the magic number for GBs is $20.00 to $30.00 how much can you exect this GB to be?
Actually I Was being serious.
Who more knowledgeable than you, a Man that understands the parameters ahead of time, and (with permission) the driver all sorted out beforehand?
There is Always a way to make more time (is a divorce all that bad?) - Just less of this and less of that in your life, but just think about all of the praise you will receive from the BLF community! - WE are Many, and will support you all the way! - That should be what’s really important to you. - Helping Others.
Hey! - We Love You Man!
I’m Totally Convinced that… You Are Da Man for This!
Just Roll with it man… 
-Chuck
I don’t remember if anyone else has suggested being able to lego X6 or A6 bodies and extensions but it might be nice.
BLF is you. Start a thread and make it happen.
that would sell on a T-shirt….
…on the back of the TK BLF A6-SE UI diagram t-shirt!
Hmm, spectacular thrower light made to BLF desired specs sounds great!