Bezel is not glued for B. I managed to remove it with the lens. Reflector did not came off as it was held down by black o-ring. LED should be accessible but I stopped at that point because I did not want it to be scratched by mistake or contact with dust.
pilotdog68 wrote:
Cool! I want to see you open them up. Please? Mainly I want to know: # Is it glued up tight or easy to get into?
It could be different... cos I got different readings between A & B (to be confirmed later).
pilotdog68 wrote:
# Are the driver and charging circuits distinct from each other?
As for the clip, it fits perfectly with SF and even Convoy S2+ without modifications(kind of over-sized).
I got my two ec-r16s yesterday. Looks like the plastic disc for reverse polarity protection means you need button tops. Flat tops won’t work. Kinda a bummer, because I wanted to use the 18350s I already had.
One light seems to work okay with my red efest 18350 flat top. The disc is a little loose on the other, so no dice on that one.
I just ordered yet another 18350. a purple efest button top. I figure I can also use it with my blf a6 shorty tube.
The light that begrudgingly works with the flat top is nice. I gave it to my wife. She really digs it. It’s stupid bright for the size and price. The tint isn’t too blue, and it charged the battery to exactly 4.2v. I used my android phone charger. Lol!
Let’s hope the other one works with the button tip on order.
I am thinking, for example OP Reflector
(and you can change the led: XHP70)
it would be possible?
For the record, I personally hope they don’t change a thing (assuming there is a solid emitter shelf). The draw for me is a huge reflector to turn 1600lumens from an XM-L2 into total laser beam. It would be cool if they can do both SMOand OP in the future, but I fear that would raise the price and take a long time to work out. I want this thing as quickly and cheaply as possible.
Interested in the Boss1,
provided there is a solid emitter shelf or decent pill, after all this thing is just begging for Max POWWWWER.
An option for OP reflector would be nice but not a show stopper.
Cool! I want to see you open them up. Please?
Mainly I want to know:
My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03
Major Projects: Illuminated Tailcap, TripleDown/TripleStack Driver
Bezel is not glued for B. I managed to remove it with the lens. Reflector did not came off as it was held down by black o-ring. LED should be accessible but I stopped at that point because I did not want it to be scratched by mistake or contact with dust.
It could be different... cos I got different readings between A & B (to be confirmed later).
As for the clip, it fits perfectly with SF and even Convoy S2+ without modifications(kind of over-sized).
@1theDeals
Interested in the MH27
Thanks Freeme!
I already ordered a clip because I was hoping it was smaller than the normal convoy clip, but it still looks like a very nice clip.
My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03
Major Projects: Illuminated Tailcap, TripleDown/TripleStack Driver
I got my two ec-r16s yesterday. Looks like the plastic disc for reverse polarity protection means you need button tops. Flat tops won’t work. Kinda a bummer, because I wanted to use the 18350s I already had.
One light seems to work okay with my red efest 18350 flat top. The disc is a little loose on the other, so no dice on that one.
I just ordered yet another 18350. a purple efest button top. I figure I can also use it with my blf a6 shorty tube.
The light that begrudgingly works with the flat top is nice. I gave it to my wife. She really digs it. It’s stupid bright for the size and price. The tint isn’t too blue, and it charged the battery to exactly 4.2v. I used my android phone charger. Lol!
Let’s hope the other one works with the button tip on order.
Consider my interest expressed in the BOSS
My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03
Major Projects: Illuminated Tailcap, TripleDown/TripleStack Driver
Freeme, thanks for adding my name to the list.
In case I forget, I may need a poke when it comes time to pony up.
Can I get the info on A,B,C and D please?
Definitely interested in the BOSS1. Will need to see a sample sent to an appropriate party to verify quality though.
I’m interested BOSS1.It would be possible with OP reflector?
I’m interested BOSS1
I’m interested BOSS1.
Courui D01 -Mod ZY-T08 Small Sun -Mod Shadow JM30 Mod - copper edition Brinyte 158B mod - copper brass hybrid
Small sun ZY-T08 Mod II - The Next Generation Small Sun ZY-T08 Best Of Both Worlds Warsun X50 mod - a complete makeover
Maglite 3C Mod - old school style
Interested with BOSS1
Don’t mistake my kindness for weakness.
I am kind to everyone, but when someone is unkind to me, weak is not what you are going to remember about me.
Interested in boss1!
USB power meter/tester thread
Ordered one NITEYE MS – R25!
Thanks
Thanks for your support!
@archimedes @Patrickbateman @ID4 @will34 @Alux @coolperl @rezzlight @Maiden666 @Scooter000 @khas @mikeyx @Trevi_lux @Skytrooper @shan6oob @Ewen @Mikk0 @euphxenos @Aardvark @slow2go @fourhumors @centaurus3200 @muellihenry @dodo @TomNMich and @RestofGBSupporters
@1theDeals
Interested in boss. Need factory mods though.
Which gets really boring. – Tuomas Holopainen, 2015
Factory mods?
My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03
Major Projects: Illuminated Tailcap, TripleDown/TripleStack Driver
I am thinking, for example OP Reflector
(and you can change the led: XHP70)
it would be possible?
http://budgetlightforum.com/node/43132?page=1#comment-853860
@1theDeals
For the record, I personally hope they don’t change a thing (assuming there is a solid emitter shelf). The draw for me is a huge reflector to turn 1600lumens from an XM-L2 into total laser beam. It would be cool if they can do both SMO and OP in the future, but I fear that would raise the price and take a long time to work out. I want this thing as quickly and cheaply as possible.
My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03
Major Projects: Illuminated Tailcap, TripleDown/TripleStack Driver
I’m interested in the Palight BOSS1
Thank you,
Roberta
Greetings from The Land Downunder
Interested in the Boss1,
provided there is a solid emitter shelf or decent pill, after all this thing is just begging for Max POWWWWER.
An option for OP reflector would be nice but not a show stopper.
Cheers David
Nothing to see here folks, move along...
I’ll take a big Boss1!
Sorry. What I meant was good to go from the factory unlike the courui d01 that needed some tweaking.
PALIGHT BOSS1
$48
if we have over 30 confirmed buyers!!!
@1theDeals
Hi Freeme, I’m interested in MH27. Please sign me up please.
Updated!
@1theDeals
can the BOSSes 1680 Lumen from a single XM-L2 be trusted ?
all new deals are also posted here: deals.m4dm4x.com
if you do not find what you are looking for :
ask MARTIN@M4DM4X.COM - i will save you money!
Pages