ENDED! Giveaway for Olight S2 Baton - 950 lumens by Olight Direct

No.
Where are you located by the way?

Brace yourself… here is a photo of my “flashlights” There are a few Olights here, but not an S2 yet. would be cool to review and add a new S2 :slight_smile:

not a fancy picture but my favorite light currently. It does everything I need! added a 380mA amc chip and pulls about 3.1A

The great Convoy S3 i use on the construction sites i visit daily. ( 3 modes, simple, easy)

Here pictured with a sheperd and the very famous christmas manatee.

i am sure the S2 fits perfectly into my EDCs

This is my favorite flashlight, BLF X6 SE. I changed the led to a dedomed xp-g2 s2 1d and driver to FET + 7135 and now it is a pocket thrower. :bigsmile:

The skin color is not important, these are my two favorite girls… :8)

Nitecore EC11 with extension tube:


My small flashlight collection :slight_smile:
My favorite is the brass one, nearly as compact as the TG06 but with 18650 inside !
A S2 baton would be a beautiful piece in this growing family !

Family photo time guys! :smiley:

A family photo of my most loved and used lights, with special mentions to my favourites
:arrow: The Mountain Electronics Supfire M6 Mod 2, BLF A6 Triple XPL shorty & the Eagle Eye X6 XPL HI 500m pocket thrower.

A Great bunch of flashlights to see in here already, Amazing stuff everyone thanks for sharing.

Thanks for the giveaway, and a Merry Christmas and Happy Holidays to all :santa:

Cheers,

KiwiKane

An older myth that made a piece of flashlight history, of which I had the luck to test and review a prototype of.

Eagletac T200C2, the one I use and beat up without worrying about it.

Thanks for including other locations this time.
I am near Melbourne in Australia.

My current EDC light, 3x7135s with a 1A emitter.

Great giveaway! Here’s my current EDC - a little knife and an oLight i3s. I’m ready to step up to a bit more lumens!

My Xintd X3, the biggest of all my flashlights and i like it a lot.

Count me in!

Here's a pair of BLF A6 Special Edition flashlights, flanking a ZebraLight SC62w. I just got the short 18350 battery tube for the A6, and now the SC62 is beginning to feel some competition.

Nice lights with high output and copper.

This is my favorite light and gets most of the EDC time

EagleTac TX25C2 with the following modifications

Cut down and polished clip and used blue Locktite on the metal ring nut holding the clip so it doesn’t loosen with use as it usually did.
XP-L HI V3 1C from Kaidomain, on 16mm Noctigon copper MPCB, love the tint! I centered it on the reflector with a modified plastic centering ring
Found a slightly bigger and deeper smooth reflector than the stock one on Kaidomain that gives it a slightly tighter hotspot for more throw
Lapped and polished the Base and the copper MPCB and used Artic Silver 5 for better heat transfer to the body of the flashlight
FET 22mm e-switch driver with Moppydrv multi-group firmware, mostly use it on group mode 11
Thicker silicon wires (20ga)
Solder braided the driver spring and also solder braided the tail cap spring to the aluminum tail cap to reduce resistance
I only run it on either a NCR18650GA or LG18650MJ1 3500mah batteries for added runtime

I definetly love this light!

Can’t help but to show my collection of lights given by a member here (djozz) (thanks again :smiley: )

about 90% of his unused lights were my weekly lights that I use now. :slight_smile:

What if I don’t have a camera? - I have 32 lights (4 are Olight), but no way to show you.

Yeah, I know that’s it’s on the Smart Phones too, but I don’t have (or even want) one of them either. - I Hate being bothered by phones, though I do have a magicJack just for my ‘family’ - VOIP.

I guess that I’m just too old and stuck in my ways to enter, but really think that the new S2 is cool!

So - Thanks anyway,
-Chuck