ReManG was right about raising the price. Bangood now has it listed at 11.95
I’m in for a copper one!
2x solid copper please
Sign me up for a copper a red and an orange one please, thanks 
Heh, how about that! I just got in my order last week for the cheaper price. I think I’d still have ordered at the $11.95 price, but it’s nice to get it a couple bucks cheaper.
I will check when I am home, but pretty sure the code still works for this light!
The code in OP works.
Thanks antiparanoico! I am on my phone and the BG site said I had to log in first, and I did not have my password on me…
1 copper
1 orange
So what’s it going for with code now? Haven’t received the one I ordered yet. If like will try another color.
FYI, I opened up two of my lights to have a look at both the 219B and the 219B-V1 from the side when already mounted. And yes, I can confirm that you can differentiate the two in that way. The 219B really shows small metall areas on the sides of the cathode and anode, where the 219B-V1 does not. You have to look closely though, because it’s the place where some excess solder comes out with most of the boards.
$8.95 with the code.
I checked my A01 and took a crappy photo with my cellphone and an old Sipik 68 lens as a macro. It did not come out clean but it does show that the LED is a V1 219B, no exposed metal…
nice, that's the first 100% proof, I guess. 
You maybe want to clean that dome with isopropyl alcohol and let it ventilate a bit. 
Yes, I did clean the dome after the pic. For some reason, me and any kind of heatsink goo have an affinity for each other… I cannot keep that stuff off of my fingers, and thus off of emitters. I use gloves on the high power stuff, this was just a quick pic and it still ended up like that… LOL
haha, I know too good what you’re talking about. I’m overly careful keeping my emitters clean, but they still manage to collect all different kinds of stuff you don’t want on them. With dedomed emitters it’s a real PITA.
1 Orange please! Thank you!
Is that chips in the dome, or heat sink paste? Awful from stock like that. I cleaned my self induced messy one ip with some 90% alcohol on a Qtip. I would let Banggood know as well…
It is mechanical scratch. I tried to clean that with cotton pad and isopropyl alcohol.
I reported that to Banggood, we’ll see what will be a response.
Mike
Hope you get a new one Mike, that is a heck of a ding!