Voted
Voted
1) I would like to see multi-emitter lights. I don’t mean just many emitters, but different ones.
ie 1x CREE as the main light but also UV and maybe a red one?
UE must be slick to make it work for a mainstream customer audience.
ps: voted in the other thread as well!
I have voted
3x XHP70 leds with NW tint
voted
Voted
Voted
Voted
Inbuilt Tazer that only shocks the sticky fingers of staff that are touching the torch, yet have no reason to do so!
I voted.
A separate switch for moonlight mode.
I have voted too
Voted.
Voted.
MT-G2 on noctigon
turbo and moonlight
led lighted button when power off to find in dark
2x18650 in parallel for short host
40-60mm diameter hear with large heat dissipating fins
integrated head
And I have voted!
A line of lights that have the following features:
- Modular so that the battery tubes, heads, tail caps, etc are exchangeable.
- One of the head options should be a monster for big throw. At least 120mm in diameter.
- Momentary side switches.
- Holds 3 to 4 18650's side by side. Battery tube extensions can be added to have 2S, 3S, and even 4S power.
- Battery carriers available that can hold 4AA, 8AA, 12AA etc. This will make the light giftable to non-flashaholics.
- A line of linear, direct drive, buck and boost drivers available for the different battery/emitter options.
Thank you GearBest for your contributions to our hobby.
I have voted.
I have voted