Low-cost copper pills, spacers, optics, drop-ins (Updated 23/10/2022))

For GITD o-ring take a look here :

http://www.aliexpress.com/store/product/200PCS-LOT-30X1-5mm-silicon-rubber-luminous-sealing-ring-waterproof-ring-O-ring/411584_32386251736.html

Ordered a bunch of spacers, s2+, s6, x5, x6. Shipping was fast just under 2 weeks and everything came in a nice little container that was bubble wrapped. Will be using that container for bits and bobs in the future.

Thanks kiriba¡

Parts that will be available in a week:
-S2+ aluminium spacer
-X5 quad conv. kit
-P60 quad drop-in
Parts that are going to be made next:
-S2+ triple/single pill with RR (?)
-triple liner for P60 quad drop-in
-M1 quad conv. kit (Khatod edition)
-Z1 copper pill
-X6 spacers for low-height Khatod optics (won’t require mcbcp sanding like with Cute-3) (?)
U11 quad conv. kit (?)

What do you mean by “S2+ triple/single pill with RR”? I’m about to order S2+ triple copper pill, is this going to be an improved version or just a new batch?

RR means retaining ring. I hope we will do it.

So should I wait for it? Is price going to be higher? I already have stock brass retaining ring, would copper affect performance positively?

If you want to wait you should know it won`t be very fast, 3-4 weeks I suppose.
Price…It is hard question. Let it happen first.
Retainig ring will be same to stock and made from brass.

Seems that HD-2010 copper pill became little more actual.
18350 cells are available now.
This drivers http://www.cnqualitygoods.com/goods.php?id=2249 and http://www.cnqualitygoods.com/goods.php?id=2248 are available too.
I realise that universal variant would be best solution, but seems it is unreal.
I see two different ways:

  1. Make driver place fit one or both this boost drivers. PCB shelf should be little lower than stock for using MT-G2, drivers have big height, but anyway shelf can be thick enough cause driver place can be moved to the tail for single cell usage.
  2. Make pill fit 20/22mm FET driver for 2x26350 cells usage. Double cells require more length between tail and pill, so driver place will be near stock, while shelf can be thick enough cause drivers are small height.
    What variant would you prefer?

Hi,

that would be really nice! I have a U11 host waiting for some improvement :+1:

Regards

Kenjii

Al only for this moment

Any timeframe idea on the alu triple spacers for the s2+ ?

Would like to have 2 alu tripple for s2+ , 1 copper s2+ tripple spacer, and 1 copper S2 tripple spacer.

my first order from Russia :smiley:

cant wait to mod my lights

Im also interest in U11 quad conv. kit depending on price :slight_smile:

looking forward to pump some more juice out of crappy stock light

I’ll take one!

Ordered!

Is there a chance to resume selling copper spacer for LEDIL Cute-3 triple X6?
I need at least one piece.

When do you expect to have the X6 Copper spacer for Ledil Cute-3 optics in stock?

Ah, missed that one! Thanks! :smiley:

Also still have lots of special made passive heatsinks:

Shipping cost via small parcel is not very good for such heavy things and I can not offer better price than 25$ for 5 of them this way.
But if you need 10 or more, contact me and I will try to count more cheap shipping way (shipping cost depends from you destination). For example, 20 of them will cost 60$ shipped to the US.

Thinking about full copper pill for Roxane M6 triple.
Good price/quality 1x26650 host with big head (XP32 hand sanding - never again!).
Anyone interested?