Yes 219C 83CRI would be nice.
And XP-G3 NW would be nice, too.
Now, with the standard S41, there is only the choice between low lumen with high CRI in NW tint or high lumen with low cri and CW.
If that should happen, there must be the combination of higher CRI with not too less lumen, that means 219C and Higher Lumen in NW, that means XP-G3 NW or XP-L HI NW.
Wasn’t the major concern with the S41 the LED layout on the MCPCB? Is this one still going to have the positive end of the emitters on the outside with nothing but some masking to keep the screws from shorting out?
Glutton for punishment… Shiny so it must be better.
Put me down for S41S XP-G3 and 18650 tube. Heat Treated if the 18650 tube will also be heat treated.
Please put me down for (1) Nichia 219B and 18650 tube. + I think w/ the heat treatment. I’m not super gung-ho about how it looks visually but I like how the light would look different than what I currently have in my stash (would I be able to change my choice later?)
+ I think this has been asked but -> would the 18650 tube also bear the heat treatment process? If not then the heat treated light w/ the plain SS 18650 tube would look pretty silly & if so then I would forgo the heat treatment process on the entire light please.