What Legoes with What?

sooo triple (3S) XHP35 HI in an A6?

Last I recall it people just had to order them, try them out, and ask the shippers to try again if what they got didn’t fit, like there was a grab bag of mixed parts at some shipping site.
I kept hoping that would get cleared up and I guess I gave up watching.

So, ah, how many tripods, and how many legs that have threads that fit so well? Time for a mod-something-unexpected challenge round??

I have ordered six so far they all fit all my X6’s and A6’s.

The only short tube I have had problems with was the bare BLF A6, never got a short tube that fitted.

Thanks. I ordered one to try. Unfortunately I ordered at the $4 price, and now they are on sale for $2 :person_facepalming:

Well right back at you, just ordered four more, $2 is the cheapest I have seen :smiley:

Foursevens Preon P1 Copper and Fenix E99Ti have heads that can be swapped with one another:

Elaborating on this because of a mention in the Best Zoomable Flashlight thread Best Zoomable Flashlight Review $5-$40 range, Sipik SK68, SK98, UF T20 Odepro KL42 (G700 flashlight alternatives)
_
So far, the “3W Police 2AA” threads fit most of the #3 zoomie, and all of the SK68 zoom and COFLY KX - FH10 zoom flashlights I’ve tried

Xref, Keltex also has a good thread on these: Sipik SK68 battery tube extension mod

I’ve used this one: cheap silver extension tube for sk68 ? - #5 by hank
http://chinaprices.net/buy-3w-white-led-aa-handy-camping-flashlight-torch-buyincoins—buyincoins-046351910

You use two of the sections with the ten ribs. Those sections have one male and one female thread.

With the #3 and SK68, the male thread fits into the zoom flashlight body in place of the tailcap.
So you can stack two of the “11-rib” sections, and you use the zoomie tailcap.
(in that case, you have the other battery tube section, tailcap, and emitter as a poor 1AA flashlight)

Or you can stack the one 11-rib section with the other section and keep the “3W” tailcap.

I guess this needs a picture, I’ll get one showing the variations.

With the Cofly zoomie, the female thread fits the zoom flashlight body in place of the tailcap, and you keep the “3W Police” tailcap switch, which has a female thread.
(in that case, I forget if there’s any way to use the leftover parts.

For a few years I had no problems; the last few #3 zoomies I tried had incompatible female threads though, so the extra section wouldn’t fit.

I can still find #3 zoomies for $2 intermittently, on sale at AliExpress (last ordered some a week ago though the price bounced back to $4 as of right now)
Not sure if they’ll have compatible threads til I have them in hand to try out though.

I couldn’t resist and ordered as well, based on this thread saying they fit the Convoy S6 host:

All convoy S series have same threads. Simon sais that short tube wont fit only because different length of tube over threads (18350 tubes were made for S2+ so they fit S2+ and probably S3).

Btw, BG was kind enough to refund the difference that I paid before it went on sale.

Nice light-throwing baton! })

Now go blow some backs, LOL!

Cheers ^:)

Hat tip to t18, at: Semi groupbuy Jaxman X1 host - #29 by T18
Jaxman X1 and Convoy L2 half tube extension lego (9 pictures somehow presented page-by-page in a single window in a single response, lovely)

Here you go…. S2+ with EE XR2

The plot thickens on this one.

I have a blue tube sold by Banggood (US warehouse) for the S2+ and it fits and works perfectly on the X2R and the S2+.

I have a second blue tube, also sold by Banggood (CN warehouse) for the S2+ that also works on the S2+ but does not even thread into the X2R.

I have a black S2+ tube directly from Simon, it also does not thread into the X2R.

I now also have a black tube sold by Banggood (CN) as “Eagle eyes 18350” linked earlier in this thread. It threads into the X2R perfectly but does not work correctly. I believe one end is not long enough to reach the contact shelf in the head. Also, the threads on this one are very very shallow, as in the ridges themselves are about half the height of those on the Convoy tubes.

Mine arrived yesterday, I had ordered two of these (maybe I ordered the wrong one?) but neither of them match the threads on any of my Convoy tube lights. Also, even though they are both supposed to be the same SKU, they don’t match. The threads are the same, but the machining is slightly different, and the finishes are much different between the two. One is a nice matte finish while the other has a shiny sheen to the anodizing. Kind of like buying two different 501b hosts from two different vendors…

:weary: :weary: :weary:

weird that there is so much variation. Still having issues since the A6 mix ups I guess.

I’ve sent EagleEye a message asking them to make an official one for their products. * fingers crossed *

Yep. As I noted at the beginning of this thread, we here can’t make a general, sweeping, “this fits that” promise to anyone else about budget parts

Because: much variation from one part to the next, even within the same product/brand. Some parts just won’t match up for some of us.

Do we feel lucky? Do we?

All this thread can promise is first hand “I have this and it fits that” information to suggest what MIGHT work for someone else.

Thanks to pilotdog68 for taking a poke at making things better (or, in this case, getting EagleEye to make things better)

I bought convoy 18350 tube to try on my EE XR2. The front fits but the tail switch part will not screw all the way on…. oh well!

Lumintop Tool … the head swaps with the Lumintop LYP365 head to make your black aluminum tool a 219B …hi-cri Nichia

At a minimum, the latest VG10 tailcap legos with the ThruNite TC12 V2. The tailcap innards swap between the caps too. Will check for other swappable parts and post some pics.