DIY Parts Reviews
Log in to post new content in the forum.
| Topic / Topic starter | Replies | Views |
Last post |
|
|---|---|---|---|---|
|
OSRAM IR SFH 4715AS + Luxeon IR short output test - Cu MCPCB vs. mosX by led4power » Tue, 05/08/2018 - 03:59 |
13 |
1,993 |
by Molcar2006 Tue, 02/23/2021 - 14:17 |
|
|
XHP50 Output test by Texas_Ace. Not bad results, can't wait to see the new XHP50.2 by Texas_Ace » Thu, 01/12/2017 - 15:48 |
17 |
4,941 |
by vidramon Fri, 02/12/2021 - 21:19 |
|
|
Luminus SST-20-W 4000 K CRI95 color and output test (Page: 1, 2, 3 … Last Page)
by maukka » Fri, 08/24/2018 - 14:55 |
217 |
29,034 |
by buck91 Tue, 01/19/2021 - 10:46 |
|
|
Modify tn40s by Jimo » Sat, 01/16/2021 - 20:45 |
6 |
172 |
by Jimo Sun, 01/17/2021 - 19:06 |
|
|
Samsung LH351D 5000k LED output test by Texas_Ace - Amazing output, low thermal resistance but high Vf (Page: 1, 2)
by Texas_Ace » Sun, 12/10/2017 - 16:41 |
38 |
11,177 |
by Caleb Tue, 12/08/2020 - 16:17 |
|
|
KDLITKER E6 21700 P60 Host by texas shooter » Mon, 11/30/2020 - 21:07 |
7 |
342 |
by texas shooter Tue, 12/01/2020 - 16:39 |
|
|
Cree XLamp XHP70.2 LED true power? by lazerman121 » Mon, 04/27/2020 - 17:32 |
14 |
903 |
by Sirstinky Thu, 11/26/2020 - 12:46 |
|
|
XHP70.2 P2 4000k Output test by Texas_Ace - it's over 9000!! lumens and still going strong! (Page: 1, 2, 3, 4)
by Texas_Ace » Wed, 12/06/2017 - 14:46 |
92 |
16,142 |
by Texas_Ace Wed, 11/18/2020 - 09:10 |
|
|
LED test: Seoul Semiconductor SunLike 3030 (6V, 3000/4000/5000/5700K, CRI95) by maukka » Mon, 02/24/2020 - 13:35 |
13 |
996 |
by id30209 Fri, 10/30/2020 - 10:09 |
|
|
LED test / review - Cree XLamp XHP35 High Intensity C4 + E2 (5000 K) - Really high performance in XP footprint? by koef3 » Wed, 12/27/2017 - 17:03 |
29 |
6,471 |
by d_t_a Thu, 10/01/2020 - 23:09 |
|
|
[Review] KDLITKER P6-TRI Triple XP-E P60 Dropin by bilakos10 » Wed, 10/10/2018 - 15:36 |
19 |
4,208 |
by stephenk Tue, 08/11/2020 - 04:35 |
|
|
Lumileds Luxeon MZ 5700K CRI90 (LMZ9-QW57) color, CRI and output test by maukka » Fri, 05/04/2018 - 03:04 |
19 |
3,534 |
by hodor Tue, 04/21/2020 - 07:13 |
|
|
[Review] D-C-Fix Window Film by Joshk » Tue, 09/24/2019 - 15:54 |
7 |
1,227 |
by Evgeniy Sun, 04/19/2020 - 00:49 |
|
|
Samsung LH351C 5000 K CRI90 color and output test by maukka » Sun, 08/26/2018 - 10:13 |
29 |
4,175 |
by Agro Thu, 03/26/2020 - 15:11 |
|
|
Most powerful strobe light of the world! by Aviator » Tue, 06/25/2019 - 14:14 |
6 |
845 |
by sac02 Thu, 03/26/2020 - 14:53 |
|
|
Driver led Schematic by lidas » Mon, 03/02/2020 - 15:38 |
0 |
246 |
by lidas Mon, 03/02/2020 - 15:38 |
|
|
Convoy S2 triple red XP-E driver problem by hpsafl » Wed, 01/27/2016 - 17:56 |
11 |
2,519 |
by hpsafl Wed, 02/26/2020 - 16:08 |
|
|
Thermal paste & pad comparison (MX4, Graphite thermal pads from IC and Panasonic) by maukka » Thu, 04/25/2019 - 13:39 |
22 |
2,369 |
by snakebite Sat, 02/22/2020 - 12:51 |
|
|
LED test / review – Luminus SST-40-W Specialty White N4 BA (+ dedomed) – Here it is, the next gen XM-L2! (Page: 1, 2)
by koef3 » Wed, 02/07/2018 - 00:52 |
47 |
10,357 |
by djozz Sat, 02/01/2020 - 18:39 |
|
|
LED test / review – Lumileds Luxeon MZ 5700 K min. 90 CRI (3V) – Finally! High CRI, High power, beautiful light (Page: 1, 2, 3)
by koef3 » Sun, 01/14/2018 - 20:21 |
75 |
11,147 |
by snakebite Fri, 01/24/2020 - 09:20 |
|
|
LED test / review - Unknown 5050 SMD LED similar to XM-L2 - extremely surprising results, even better than the original?! by koef3 » Sat, 12/30/2017 - 18:36 |
15 |
3,645 |
by snakebite Fri, 01/24/2020 - 09:11 |
|
|
LED test / review Osram SYNIOS P2720 DMLQ31.SG white - Small chip, but big in luminance - at low current! (Page: 1, 2)
by koef3 » Sat, 12/23/2017 - 21:18 |
60 |
9,099 |
by Agro Fri, 01/24/2020 - 04:03 |
|
|
4x E21A 9080 CRI output test by Texas_Ace - Amazing tint and good output (Page: 1, 2)
by Texas_Ace » Thu, 03/08/2018 - 14:57 |
51 |
7,761 |
by iamlucky13 Fri, 01/24/2020 - 02:33 |
|
|
LED test / review - Cree XLamp XP-L2 V5 40E & U6 40H 90 CRI – High light flux and low Vf, but very huge spread in performance by koef3 » Tue, 01/09/2018 - 17:49 |
27 |
5,046 |
by djozz Fri, 01/10/2020 - 03:25 |
|
|
(∅20 mm star) MCPCB heatsinking power quick test by Barkuti » Sun, 01/05/2020 - 04:14 |
0 |
379 |
by Barkuti Sun, 01/05/2020 - 04:14 |
|
|
LED test: Osram LE UW S2WP (3V, quad die) by maukka » Sat, 12/07/2019 - 14:41 |
8 |
971 |
by EasyB Fri, 12/20/2019 - 13:32 |
|
|
XHP35 output and death test + PWM efficiency test by Texas_Ace (Page: 1, 2)
by Texas_Ace » Fri, 12/30/2016 - 15:07 |
33 |
12,167 |
by Hank33 Sun, 12/15/2019 - 15:59 |
|
|
Bezel removal tools from darksucks and oveready by jon_slider » Wed, 09/18/2019 - 15:14 |
8 |
872 |
by SKV89 Tue, 12/10/2019 - 13:41 |
|
|
Test/Review of Qlite Rev.A 7135*8 Multiple Modes Circuit Board 3.04A (Page: 1, 2)
by HKJ » Wed, 01/01/2014 - 16:06 |
43 |
11,950 |
by Agro Mon, 12/09/2019 - 03:54 |
|
|
LED test: LatticeBright XD-3535 (from an SK68 clone) by maukka » Sun, 12/08/2019 - 05:03 |
5 |
497 |
by rngwn Sun, 12/08/2019 - 07:24 |
|
|
Cleqee P1040 Banana to Crocodile test lead (mini review) by Andrew_Debbie » Thu, 11/07/2019 - 05:02 |
2 |
328 |
by gravelmonkey Thu, 11/07/2019 - 12:42 |
|
|
LED test / review - Cree XLamp XHP70.2 P2 40E (4000 K) - The second generation of extreme overcurrent and light flux capability? by koef3 » Thu, 12/28/2017 - 12:27 |
20 |
6,235 |
by Pavlo Sun, 11/03/2019 - 19:10 |
|
|
XHP50.2 J4 4000k output test by Texas_Ace - Really impressive improvement from the last gen (Page: 1, 2)
by Texas_Ace » Wed, 12/06/2017 - 21:17 |
39 |
9,626 |
by JasonWW Sun, 11/03/2019 - 10:06 |
|
|
XHP70.2 at full power of 30W through two channels. (Page: 1, 2)
by svitlo » Thu, 01/31/2019 - 12:20 |
36 |
3,222 |
by svitlo Fri, 11/01/2019 - 04:46 |
|
|
New Foursevens Quark Aspheric Lens Beamshot by Got Lumens » Wed, 10/30/2019 - 21:52 |
9 |
709 |
by dealgrabber2002 Thu, 10/31/2019 - 14:00 |
|
|
Potting, beginner to advanced by QMT93 » Sun, 07/28/2019 - 14:10 |
17 |
1,400 |
by Matjazz Tue, 10/29/2019 - 06:53 |
|
|
Luminus SST-20-W 6500 K CRI70 color and output test by maukka » Fri, 08/03/2018 - 14:52 |
13 |
3,509 |
by JasonWW Thu, 10/24/2019 - 19:33 |
|
|
Just how important is thermal paste? The results may surprise some people... Tested by Texas_Ace (Page: 1, 2)
by Texas_Ace » Thu, 03/23/2017 - 11:50 |
40 |
8,809 |
by hasddie293 Sun, 09/29/2019 - 16:50 |
|
|
[Review] E21A R9080 5000K (Page: 1, 2)
by Joshk » Mon, 09/23/2019 - 13:53 |
37 |
4,250 |
by ToyKeeper Wed, 09/25/2019 - 01:28 |
|
|
E21A Color Test with surprising result (Page: 1, 2)
by Joshk » Fri, 09/13/2019 - 14:00 |
41 |
2,679 |
by Joshk Mon, 09/23/2019 - 14:37 |
|
|
C8 drop in by almax1800 » Mon, 09/16/2019 - 19:04 |
9 |
682 |
by Lightbringer Mon, 09/16/2019 - 22:24 |
|
|
LED test / review - OSRAM OSLON Black Flat HWQP - still highest luminance of all LEDs to date! by koef3 » Sun, 03/11/2018 - 13:36 |
19 |
4,495 |
by ChangchungLeds Sat, 08/03/2019 - 10:26 |
|
|
Best Hi-CRI LED suggestions please! by hellokittyhk » Fri, 07/05/2019 - 15:29 |
20 |
1,631 |
by hellokittyhk Sun, 07/07/2019 - 16:17 |
|
|
DIY landing light (spot) by Aviator » Mon, 06/24/2019 - 06:27 |
14 |
1,057 |
by Aviator Wed, 07/03/2019 - 11:59 |
|
|
Test/review of Led driver 17mm 3A LiIon Fasttech 4594600 (Page: 1, 2)
by HKJ » Fri, 09/07/2018 - 10:22 |
41 |
4,650 |
by el Capitan Mon, 06/17/2019 - 16:10 |
|
|
Nichia 219B 4500k D220 9080 CRI Emitter output test by Texas_Ace; Amazing tint and CRI! Output is what you would expect. (Page: 1, 2, 3, 4)
by Texas_Ace » Wed, 03/01/2017 - 11:48 |
113 |
23,270 |
by trailhunter Sat, 06/15/2019 - 10:23 |
|
|
Nichia 219C D260 9050 90+ CRI Emitter output test by Texas_Ace (Page: 1, 2)
by Texas_Ace » Mon, 12/26/2016 - 12:31 |
39 |
18,570 |
by mitsuki08 Mon, 06/03/2019 - 10:50 |
|
|
Lumileds Luxeon Z ES 5700K CRI90 (LXZ2-5790) by maukka » Thu, 05/03/2018 - 11:32 |
3 |
1,145 |
by Agro Wed, 05/15/2019 - 12:09 |
|
|
Cree MHD-E 4000K CRI90 9V emitter test (C0UF440G) by maukka » Sat, 05/11/2019 - 13:59 |
13 |
1,456 |
by zak.wilson Sun, 05/12/2019 - 20:00 |
|
|
side switches covers retaining rings complete by 4492011 » Sat, 05/04/2019 - 15:28 |
8 |
638 |
by Ilumenati Wed, 05/08/2019 - 04:26 |
Log in to post new content in the forum.