HD2010 - where to buy ?

118 posts / 0 new
Last post
Muto
Online
Last seen: 4 min 21 sec ago
Joined: 09/04/2012 - 16:42
Posts: 2699
Location: Southeast, PA
MarioSS wrote:
damn not sure where to buy mine lol. Any recent feedback would be appreciated

Got my FandyFire HD2010 from LightsCastle and could not be happier.

See my review here http://budgetlightforum.com/node/14909#node-14909

Just Order it and enjoy it soon!
Later,
Keith

The difference between Hoarding and Collecting is the illusion of Organization
.
.“I will get one of flashlight from patrol car”

“History doesn’t repeat itself, but it sometimes rhymes,” Mark Twain

After the Apocalypse there will be only 2 things left alive, Cockroaches and Keith Richards

jmpaul320
jmpaul320's picture
Offline
Last seen: 1 month 1 week ago
Joined: 05/22/2012 - 09:06
Posts: 4189
Location: CT

has anyone modded this to t6 3c?

Would you mind keeping the wrong flashlight?
Best wish, May
Tmart service team

 

Soumil wrote:

PLEASE HELP ME GEARBEsT! IM LITERALLY CRYING!

 

Suncoaster
Suncoaster's picture
Offline
Last seen: 3 days 9 hours ago
Joined: 02/22/2012 - 07:14
Posts: 2192
Location: Where the girls are green and the grass is pretty.
I got a flawless black one at Lightmalls http://www.lightmalls.com/perfect-ultrafire-hd2010-600lm-cree-xm-l-t6-5-...

Tmart http://www.tmart.com/UItraFire-CREE-XMLT6-8W-1300-Lumen-5-Mode-LED-Flashlight-Black_p135768.html

No problems.

Edit: had the wrong store. Should have looked up the spreadsheet.

"In the land of the blond the one eyed man is king."

*This message is protected with ROT26 encryption.Old Lumens

MarioSS
MarioSS's picture
Offline
Last seen: 6 years 2 months ago
Joined: 11/02/2012 - 12:17
Posts: 145
Location: Jordan

@ Muto Thanks for that great review i read it couple of days ago! Never tried ordering from LightsCastle before tho

@ Suncoaster is it the Ultrafire brand? hows the quality and shipping speed?

Thanks in advance guys

Suncoaster
Suncoaster's picture
Offline
Last seen: 3 days 9 hours ago
Joined: 02/22/2012 - 07:14
Posts: 2192
Location: Where the girls are green and the grass is pretty.

I meant Tmart !
I got my Ultrafire HD2010 from Tmart. About $30.
Lightmalls was for another.

It’s Ultrafire, black and pretty flawless. It has been doing backyard duty, living beside the back door, and turned on high for only a few minutes at a time most nights.

"In the land of the blond the one eyed man is king."

*This message is protected with ROT26 encryption.Old Lumens

MarioSS
MarioSS's picture
Offline
Last seen: 6 years 2 months ago
Joined: 11/02/2012 - 12:17
Posts: 145
Location: Jordan

I just recieved my fandyfire HD2010 from Lightscastle.
This thing is DAMN BRIGHT! zero body damage or scratches. The build and feel is just ROCK SOLID! i love this bad boy.
I took some tailcap reading off a fresh KeepPower 18650 protected Panasonic 3400mAh and i can only read high setting which is 3.35mA at the tailcap and SOS mode which i didnt pay any attention to.
Only thing to note is my HD2010 came with a black clicky instead of green GITD rubber, and it came with a holster and the 18650 battery adapter

hhjester
Offline
Last seen: 9 years 1 month ago
Joined: 11/25/2012 - 10:28
Posts: 7
Location: morrisville

ordered mine Monday,said it was in us warehouse so I hope I get tomorrow. tmart say order is processed but not shipped hope they just didn’t update.

Infinite
Infinite's picture
Offline
Last seen: 2 years 2 months ago
Joined: 11/06/2011 - 09:34
Posts: 224

I received my HD2010 from DD ( 45 days! – long delivery time). I paid 21 $ (with Coupon Code and DD Points).
It is an original Ultrafire. Its heavier than I thought… I’ll try to check it out this evening.

travis
Offline
Last seen: 2 weeks 4 days ago
Joined: 03/19/2012 - 23:54
Posts: 1012
Location: SoCal

Got mine from T-Mart, and it was only $26 after using the $5 off coupon.
Ordered Friday, arrived Wednesday. Its black-I do not know about drivers and all that—but it is free of branding
—-and I love it!

“"A free people ought not only be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government.””
-George Washington

cainn
Offline
Last seen: 11 months 4 days ago
Joined: 05/26/2012 - 13:45
Posts: 998
Location: Melbourne, Australia
jmpaul320 wrote:
has anyone modded this to t6 3c?

Certainly have. Nothing to it really. I’m still using the original driver for now, but I plan to swap that out too at some point.

ohaya
Offline
Last seen: 1 month 1 hour ago
Joined: 03/16/2013 - 19:01
Posts: 5332
Location: US

This is an older thread, but is there anywhere to get a new HD2010 now that has good performance, esp. with respect to current?

FastTech has the FandyFire, that they now claim has 3.1 amps draw:

https://www.fasttech.com/products/0/10002766/1205801-fandyfire-hd2010-cr...

It seems like everywhere else is kind of a lottery as far as what driver you get?

I tried to see if I could get another one from Tmart and have them check the driver, but so far no luck, so I’m still looking.

jmpaul320
jmpaul320's picture
Offline
Last seen: 1 month 1 week ago
Joined: 05/22/2012 - 09:06
Posts: 4189
Location: CT

ohaya wrote:
This is an older thread, but is there anywhere to get a new HD2010 now that has good performance, esp. with respect to current?

FastTech has the FandyFire, that they now claim has 3.1 amps draw:

https://www.fasttech.com/products/0/10002766/1205801-fandyfire-hd2010-cr...

It seems like everywhere else is kind of a lottery as far as what driver you get?

I tried to see if I could get another one from Tmart and have them check the driver, but so far no luck, so I’m still looking.

i got mine from tmart usa warehouse for 30.34 after coupon codes promos etc.

it was a “real” model despite being unlabeled (real meaning direct drive on high mode)

Would you mind keeping the wrong flashlight?
Best wish, May
Tmart service team

 

Soumil wrote:

PLEASE HELP ME GEARBEsT! IM LITERALLY CRYING!

 

ohaya
Offline
Last seen: 1 month 1 hour ago
Joined: 03/16/2013 - 19:01
Posts: 5332
Location: US

jmpaul320 wrote:
ohaya wrote:
This is an older thread, but is there anywhere to get a new HD2010 now that has good performance, esp. with respect to current?

FastTech has the FandyFire, that they now claim has 3.1 amps draw:

https://www.fasttech.com/products/0/10002766/1205801-fandyfire-hd2010-cr...

It seems like everywhere else is kind of a lottery as far as what driver you get?

I tried to see if I could get another one from Tmart and have them check the driver, but so far no luck, so I’m still looking.

i got mine from tmart usa warehouse for 30.34 after coupon codes promos etc.

it was a “real” model despite being unlabeled (real meaning direct drive on high mode)

I think it makes a difference, so can you provide a link, and also when you ordered it?

I got one recently from them and it was with an EAST-092B:

http://www.tmart.com/UItraFire-CREE-XM-LT6-8W-1300-Lumen-5-Mode-LED-Flashlight-Gray_p135765.html

which I just returned, because of other reasons.

ohaya
Offline
Last seen: 1 month 1 hour ago
Joined: 03/16/2013 - 19:01
Posts: 5332
Location: US

ohaya wrote:
jmpaul320 wrote:
ohaya wrote:
This is an older thread, but is there anywhere to get a new HD2010 now that has good performance, esp. with respect to current?

FastTech has the FandyFire, that they now claim has 3.1 amps draw:

https://www.fasttech.com/products/0/10002766/1205801-fandyfire-hd2010-cr...

It seems like everywhere else is kind of a lottery as far as what driver you get?

I tried to see if I could get another one from Tmart and have them check the driver, but so far no luck, so I’m still looking.

i got mine from tmart usa warehouse for 30.34 after coupon codes promos etc.

it was a “real” model despite being unlabeled (real meaning direct drive on high mode)

I think it makes a difference, so can you provide a link, and also when you ordered it?

I got one recently from them and it was with an EAST-092B:

http://www.tmart.com/UItraFire-CREE-XM-LT6-8W-1300-Lumen-5-Mode-LED-Flashlight-Gray_p135765.html

which I just returned, because of other reasons.

Well, I just decided to order the same one again from Tmart, and take my chances, I guess. It usually takes ~5 days to get here. I’ll post back…

jmpaul320
jmpaul320's picture
Offline
Last seen: 1 month 1 week ago
Joined: 05/22/2012 - 09:06
Posts: 4189
Location: CT

ohaya wrote:
ohaya wrote:
jmpaul320 wrote:
ohaya wrote:
This is an older thread, but is there anywhere to get a new HD2010 now that has good performance, esp. with respect to current?

FastTech has the FandyFire, that they now claim has 3.1 amps draw:

https://www.fasttech.com/products/0/10002766/1205801-fandyfire-hd2010-cr...

It seems like everywhere else is kind of a lottery as far as what driver you get?

I tried to see if I could get another one from Tmart and have them check the driver, but so far no luck, so I’m still looking.

i got mine from tmart usa warehouse for 30.34 after coupon codes promos etc.

it was a “real” model despite being unlabeled (real meaning direct drive on high mode)

I think it makes a difference, so can you provide a link, and also when you ordered it?

I got one recently from them and it was with an EAST-092B:

http://www.tmart.com/UItraFire-CREE-XM-LT6-8W-1300-Lumen-5-Mode-LED-Flashlight-Gray_p135765.html

which I just returned, because of other reasons.

Well, I just decided to order the same one again from Tmart, and take my chances, I guess. It usually takes ~5 days to get here. I’ll post back…

thats the one i got i believe

Would you mind keeping the wrong flashlight?
Best wish, May
Tmart service team

 

Soumil wrote:

PLEASE HELP ME GEARBEsT! IM LITERALLY CRYING!

 

ohaya
Offline
Last seen: 1 month 1 hour ago
Joined: 03/16/2013 - 19:01
Posts: 5332
Location: US

jmpaul320 wrote:
ohaya wrote:
ohaya wrote:
jmpaul320 wrote:
ohaya wrote:
This is an older thread, but is there anywhere to get a new HD2010 now that has good performance, esp. with respect to current?

FastTech has the FandyFire, that they now claim has 3.1 amps draw:

https://www.fasttech.com/products/0/10002766/1205801-fandyfire-hd2010-cr...

It seems like everywhere else is kind of a lottery as far as what driver you get?

I tried to see if I could get another one from Tmart and have them check the driver, but so far no luck, so I’m still looking.

i got mine from tmart usa warehouse for 30.34 after coupon codes promos etc.

it was a “real” model despite being unlabeled (real meaning direct drive on high mode)

I think it makes a difference, so can you provide a link, and also when you ordered it?

I got one recently from them and it was with an EAST-092B:

http://www.tmart.com/UItraFire-CREE-XM-LT6-8W-1300-Lumen-5-Mode-LED-Flashlight-Gray_p135765.html

which I just returned, because of other reasons.

Well, I just decided to order the same one again from Tmart, and take my chances, I guess. It usually takes ~5 days to get here. I’ll post back…

thats the one i got i believe

Thanks for the confirmation.

I’m “traditionally” not very lucky, so I’ll probably get one with the EAST-092B again, BUT, I’m being hopeful and “keeping my fingers crossed” this time :)!!

Will definitely post back, but, wish me luck :)???

PyTech
PyTech's picture
Offline
Last seen: 1 month 1 week ago
Joined: 09/01/2012 - 06:21
Posts: 635
Location: Highland, California. USA

Sorry don’t know if it’s relevant but anyone that does purchase one from tmart can save a few bucks
.

email from tmart 5-16-13

Quote:

.Additionally,You can get $3 off a purchase of $30 or more.Coupon Code:HAPPYSUMMER.(Within 3 Days)

-Sean

ohaya
Offline
Last seen: 1 month 1 hour ago
Joined: 03/16/2013 - 19:01
Posts: 5332
Location: US

PyTech wrote:
Sorry don’t know if it’s relevant but anyone that does purchase one from tmart can save a few bucks
.

email from tmart 5-16-13

Quote:

.Additionally,You can get $3 off a purchase of $30 or more.Coupon Code:HAPPYSUMMER.(Within 3 Days)

Too late for me :)… But it might still help someone else, so thanks for posting…

Jim

Tanner
Offline
Last seen: 11 months 4 days ago
Joined: 06/18/2013 - 15:38
Posts: 94
Location: Alabama / US

The one I recieved from tmart seems perfect, very strong, correct driver, clean threads, decent o-rings, even had clean glass. It’s unbranded, all black no lettering at all. I’ve only used it a couple times but, it works well. HD2010 Linky

Who knows if they are shipping good ones mixed in with 92B versions, but I did get a good one recently. Took 4 days to get it… US to US shipping…

leaftye
Offline
Last seen: 1 year 1 month ago
Joined: 07/25/2012 - 17:43
Posts: 4278
Location: San Diego, CA

I didn't check the current on my new tmart HD2010 yet, but I also think they may be using the good East92 driver.

The low mode should be lower.

Tanner
Offline
Last seen: 11 months 4 days ago
Joined: 06/18/2013 - 15:38
Posts: 94
Location: Alabama / US

Mine says East 92, very easy to see the lettering inside. I haven’t checked mine with a meter yet, but its definitely an East 92. Very good throw with a bit of whine in the lower modes. Medium has the most whine, not loud, but its there if you listen for it. I’m surprised I got a strong one after reading all the threads on the weak ones. Its actually a nice light, paid $27.15 for mine with the TLFLASH code.

Aftrburnr
Offline
Last seen: 11 months 4 days ago
Joined: 06/09/2013 - 13:10
Posts: 220
Location: East Valley, AZ.

Glad this thread popped up as I was wanting to maybe get one of these. But, I have also read there’s alot of manufacturing differences with this light. I’ll be reading the thread.

Thanks!

Tanner
Offline
Last seen: 11 months 4 days ago
Joined: 06/18/2013 - 15:38
Posts: 94
Location: Alabama / US

The quality control is always an issue in general and I was surprised that I actually got a well built HD2010 because I didn’t want to mod it. I chose the black one because it had recent reviews saying it was well driven. The Tmart reviews were actually correct. The next batch may not be. The grey ones are hit and miss on Tmart. I know of at least three people last month who received good black 2010’s from Tmart. So, its probably the best gamble for US buyers right now. Its odd the unbranded version is well built, but it is for a change..

leaftye
Offline
Last seen: 1 year 1 month ago
Joined: 07/25/2012 - 17:43
Posts: 4278
Location: San Diego, CA

Tanner wrote:
Its odd the unbranded version is well built, but it is for a change..

Not really, but it should be.  There's no such thing as an Ultrafire HD2010 because Ultrafire never made an HD2010.  An HD2010 is just an HD2010.

The low mode should be lower.

2 DOGS
Offline
Last seen: 2 years 9 months ago
Joined: 10/06/2011 - 13:08
Posts: 310
Location: Grays Harbor, WA

I just received the unbranded gray 2010.
Its a little lighter gray than my older one and the quality is not quite as good.
The hot spot is not quite as clean.
The threads were dry and the brass neg. button in the tailcap was stuck.
The o-ring on the lens is a little too big, it won’t fit in the groove so it’s probably not watertight.
The driver is the East 92 but it’s etched on the backside not printed on the front.
My first 2010 pulls 4.5a with a TF flame 5000.
The new one is 4.2a with the same battery, overall brightness is about the same.
Still it’s a good deal for $28

photon1k
photon1k's picture
Offline
Last seen: 4 years 10 months ago
Joined: 02/11/2011 - 23:29
Posts: 901
Location: Lotus Land, Canada

The TFLASH code didn't work for me. Anyone know another one that works?

Tanner
Offline
Last seen: 11 months 4 days ago
Joined: 06/18/2013 - 15:38
Posts: 94
Location: Alabama / US
leaftye wrote:

Tanner wrote:
Its odd the unbranded version is well built, but it is for a change..

Not really, but it should be.  There’s no such thing as an Ultrafire HD2010 because Ultrafire never made an HD2010.  An HD2010 is just an HD2010.

I’ve seen some really poor unbranded knock offs, my branded lights have been better in quality usually. But, I actually like my unbranded SRK too. You never really know what you’ll get till its in hand sadly. I’ve bought Ultrafire and received a Cree. I don’t really care as long as the light reflects the price paid at least. I can lube my own threads. Its nice when a budget light actually works without tweaking though.

Pages