Whatever happened with the rumors of the new Meteor I believe it was or something similar, read about a new light on the Meteor thread some time back ? Last year I believe.
Whatever happened with the rumors of the new Meteor I believe it was or something similar, read about a new light on the Meteor thread some time back ? Last year I believe.
It’s probably going to be the D17.
Yes, thank you Maukka, I think you very well could be right,
I think because I was reading the Meteor thread when I read of a new light by Hank I may have just assumed the talk of a new light would be similar to the Meteor.
Either way, I do know only one thing for sure, if it’s from Hank it will be great so I have made a note to follow this thread more often, thanks again I do believe you are correct.
Edit: Was reading the thread back some pages from here and found someone who actually quoted the same thing I read on the Meteor thread and what my question was here, so relieved to know I wasn’t to far off anyhow, but sadly Hank didn’t catch the question or comment anyhow, but this forum member recalls the exact wording of what I read some time ago and what lead me to think a new styled Meteor was in the mix from Hank and it was as follows,
“The planned 8×18650 powered Noctigon was I believe supposed to have 9 XHP35 HI emitters for 16000 lumens. Perhaps this changed to seventeen XP-L HI emitters? Or maybe seventeen XP-G2/Nichia emitters for around 10000 lumens, but with a lot more throw than the M43?”
And rats no reply from Mr Hank, that was what I was asking about, what a light that would be, but these new lights mentioned by Hank sure do sound nice so will will be keeping my eye out
^^^ Hey hope is all fine Mr. T18. Here’s the info Hank wrote about the new monster light, post #100 and #121: http://budgetlightforum.com/node/49316?page=3
And according to post #218 of this thread, D17 is a typo, and should be D7 for seven emitters.
Whatever this D7 is going to be, it sure ain’t no shoe lace light…
Hello, special discount for …
And the Noctigon XM16, XM20MCPCB.
Get them until stock lasts!
I would like to get some of this Noctigon MCPCBs but MOQ is 10 sets (20 boards), isn’t that a bit too much! Also LEDs are 5 pcs min.
I understand that you don’t want to bother with small orders but if you could reduce XML20/16 boards to 5 sets that would be very nice.
Thanks
^^^ Hey hope is all fine Mr. T18. Here’s the info Hank wrote about the new monster light, post #100 and #121: http://budgetlightforum.com/node/49316?page=3
And according to post #218 of this thread, D17 is a typo, and should be D7 for seven emitters.
Whatever this D7 is going to be, it sure ain’t no shoe lace light…
Hey pal, all is good hope the same for you Mr. hIKARInoob and just awesome thanks for the links and I agree with the D7 being no shoe lace light, got the typo part mentioned by Hank but have to admit I was looking at that when at first mention of a D17 really hard and wondering, is this what was being talked about..?? Ha ha, Nope..
Well got all the answers now thanks to you and others as well, so thanks again my friend have a great one,, Later … I am off to check that link you so kindly provided, thanks again..!
Hello, special discount for …
And the Noctigon XM16, XM20MCPCB.
Get them until stock lasts!
I would like to get some of this Noctigon MCPCBs but MOQ is 10 sets (20 boards), isn’t that a bit too much! Also LEDs are 5 pcs min.
I understand that you don’t want to bother with small orders but if you could reduce XML20/16 boards to 5 sets that would be very nice.
Thanks
Hello, special discount for …
And the Noctigon XM16, XM20MCPCB.
Get them until stock lasts!
I would like to get some of this Noctigon MCPCBs but MOQ is 10 sets (20 boards), isn’t that a bit too much! Also LEDs are 5 pcs min.
I understand that you don’t want to bother with small orders but if you could reduce XML20/16 boards to 5 sets that would be very nice.
Thanks
+1
Well, they are a discounted price and they have free shipping! I think the MOQ is just to insure that he doesn’t lose too much money on these!
—
The Cycle of Goodness: “No one prospers without rendering benefit to others”
- The YKK Philosophy
Hello, special discount for …
And the Noctigon XM16, XM20MCPCB.
Get them until stock lasts!
I would like to get some of this Noctigon MCPCBs but MOQ is 10 sets (20 boards), isn’t that a bit too much! Also LEDs are 5 pcs min.
I understand that you don’t want to bother with small orders but if you could reduce XML20/16 boards to 5 sets that would be very nice.
Thanks
+1
Well, they are a discounted price and they have free shipping! I think the MOQ is just to insure that he doesn’t lose too much money on these!
Thanks for your understanding, the price including shipping is very cheap now,
by adding 10 sets MOQ is only to cover some shipping fee.
Subscribing so I can get updates on that nice looking D4! Looks like a promising alternative to the FW3A. Going to be a tough decision between the two.
Glad to hear that it is almost there. Sorry, I can’t stop myself from comparing : did the light become a bit longer with the latest bezel?
Good catch! Yes, the bezel is 2mm longer than before to fit the lens and optic better, with double o-ring to offer more reliable water proof, so, the length is 94mm now.
Alright how about a question to Mr. Hank then. So is the D7 model the infamous 17000 lumen 8×18650 monster, or is it another model? And if it is another model, will we someday see the 17000 lumen monster?
8 days ago still, a design change of the body was tested by Hank. How can anyone expect that in 8 days the final design was approved, production has taken place and the many lights ready for sale on the website?
If the lights are indeed available this week, as a member of the Q8 team I envy Hank to have this super-manufacturer.
It’s probably going to be the D17.
Yes, thank you Maukka, I think you very well could be right,
I think because I was reading the Meteor thread when I read of a new light by Hank I may have just assumed the talk of a new light would be similar to the Meteor.
Either way, I do know only one thing for sure, if it’s from Hank it will be great so I have made a note to follow this thread more often, thanks again I do believe you are correct.
Edit: Was reading the thread back some pages from here and found someone who actually quoted the same thing I read on the Meteor thread and what my question was here, so relieved to know I wasn’t to far off anyhow, but sadly Hank didn’t catch the question or comment anyhow, but this forum member recalls the exact wording of what I read some time ago and what lead me to think a new styled Meteor was in the mix from Hank and it was as follows,
“The planned 8×18650 powered Noctigon was I believe supposed to have 9 XHP35 HI emitters for 16000 lumens. Perhaps this changed to seventeen XP-L HI emitters? Or maybe seventeen XP-G2/Nichia emitters for around 10000 lumens, but with a lot more throw than the M43?”
And rats no reply from Mr Hank, that was what I was asking about, what a light that would be, but these new lights mentioned by Hank sure do sound nice so will will be keeping my eye out
^^^ Hey hope is all fine Mr. T18.
Here’s the info Hank wrote about the new monster light, post #100 and #121: http://budgetlightforum.com/node/49316?page=3
And according to post #218 of this thread, D17 is a typo, and should be D7 for seven emitters.
Whatever this D7 is going to be, it sure ain’t no shoe lace light…
I would like to get some of this Noctigon MCPCBs but MOQ is 10 sets (20 boards), isn’t that a bit too much! Also LEDs are 5 pcs min.
I understand that you don’t want to bother with small orders but if you could reduce XML20/16 boards to 5 sets that would be very nice.
Thanks
Hey pal, all is good hope the same for you Mr. hIKARInoob and just awesome thanks for the links and I agree with the D7 being no shoe lace light, got the typo part mentioned by Hank but have to admit I was looking at that when at first mention of a D17 really hard and wondering, is this what was being talked about..?? Ha ha, Nope..
Well got all the answers now thanks to you and others as well, so thanks again my friend have a great one,, Later … I am off to check that link you so kindly provided, thanks again..!
+1
Well, they are a discounted price and they have free shipping! I think the MOQ is just to insure that he doesn’t lose too much money on these!
The Cycle of Goodness: “No one prospers without rendering benefit to others”
- The YKK Philosophy
by adding 10 sets MOQ is only to cover some shipping fee.
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
Just add the Noctigon 4xp 4p quad board.
http://intl-outdoor.com/index.php?main_page=products_new
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
Looks very interesting, and no more jumpers with the parallel setup, can’t wait to see the beam profile in comparison with the MTN quad board.
Order placed thanks
Subscribing so I can get updates on that nice looking D4! Looks like a promising alternative to the FW3A. Going to be a tough decision between the two.
I’d assume this will be similar to the tpad quad board. The led orientation is the same.
I looked at this before i ordered the new MTN board yesterday.A third version prototype is produced and tested, the bezel on the final version
will have the same anadizing as the body,
The turbo gets hot so quickly!
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
Can’t wait Hank
Glad to hear that it is almost there. Sorry, I can’t stop myself from comparing
link to djozz tests
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
Usb charge?
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
Please keep it like that for the other lights too
water proof testing
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
Hank any idea how many lumens is gonna do?
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
I am little impatient!!! I can no t wait!!
Damn. Was gonna get the Nitecore Concept 1 but no point now haha
Any idea when the D1S will be available? I was about to buy a uTorch UT02, but then I saw this one.
These new lights look like they’re going to be a real hit. It’ll be hard to wait for shipping.
…It’s the 29th of the month… Hope there are no delays…
Alright how about a question to Mr. Hank then. So is the D7 model the infamous 17000 lumen 8×18650 monster, or is it another model? And if it is another model, will we someday see the 17000 lumen monster?
Was looking forward to the end of the month
8 days ago still, a design change of the body was tested by Hank. How can anyone expect that in 8 days the final design was approved, production has taken place and the many lights ready for sale on the website?
If the lights are indeed available this week, as a member of the Q8 team I envy Hank to have this super-manufacturer.
link to djozz tests
Pages