I have 3 (one each to 3 different people) UNBUILT BLF15DDV2.0 boards. NO COMPONENTS, bare boards only. I ordered these along with my 17’s just to see them but I don’t need them.
To enter simply post I’m in, one post per person. I will draw 3 winners using random.org on May 1st. US only please.
Go.
Note if any of the main contributors to these OSHPark projects needs one of these they get one without being in the drawing, I hope that’s understandable.
Soldering these by hand can be fun if you have a fine point iron and work your way from the center out. The only two components that can be installed backwards are the diode and the mcu. There is a line on the board that corresponds to the line on the diode and an asterisk on the board that corresponds to the dot on the at tiny 13A. Several different members are set up to reflash the mcu which is a good idea since the higher current pulses passes by the FET tend to make the low modes brighter. This set up is easily capable of turning a 14500 light into a 4A pocket rocket while still having the moon and low modes you would expect from a small EDC. The only extra part you need besides what comes from a nanjg 105C or AK47 3x7135 driver(both available from RMM) is 1 extra resistor (100-200 ohms, also available from RMM) if you are only building a few. The Digikey shopping cart has been pre loaded by Comfychair if you prefer not to pull the parts from an existing driver and plan to do several. Just be sure to adjust the quantities to your needs.
Allright guys winners are Crank, 18sixfifty and nofeark9!
Gentlemen I will send you the boards regular mail within the next day or so (by this weekend). This isn’t a requirement but it would be cool if you would post pic’s of the built boards here (or in your own build thread) when you get them together.
Still have not heard from NofeareK9 even tho I’ve PM’d him and he’s been on since my PM, NofeareK9 you have till 6:45Pm EST (that’s 24 hours) to get me your address or I will redraw the 3rd winner, I’m mailing these tomorrow and want to have them all sent at the same time.
Have any of you (US) guys received your driver boards yet? I would expect them around today if not already (Nofearek9 I expect yours to take awhile longer). I mailed them Saturday but I missed the cut-off time so they didnt start to actually move till monday.
its will be a long trip for it.