A couple for sale or trade ( All sold! Thanks BLF for funding my addiction)

I have large stock order I need to place so I’d like to get this gone ASAP, for a quick sale I’ve lowered the price to $32 shipped (will only remain lowered threw the 2nd, at which time I get paid and will have the funds to cover my order and the price will go back up).

First up is a Zebralight H51d with a 4200k rebel HCRI. I got this one about a year and a half ago direct from ZL. The ZL headband has never been used. What you see is what you get, no GITD holder but it does include the blue GITD paracord headband (my preferred method) and it has green GITD epoxy in the fins. I will also toss in a brand new L91 energized so its truely turn-key. The lens has diffuser film on it but it would be a two second job to remove. Asking $40 shipped PayPal only (sent as payment, no fees) or whole/partial trades.

Edit: not pictured but included is a factory ZL detachable pocket clip.

This pic is taken after being charged with a white light, not under UV/not charged with UV, the paracord doesn’t glow the best but the epoxy (I make it with glow powder and devcon) is nice and bright and glows a few hours per refresh charge

Up next is a Fandfire HD2010. I recently built it with an XM-L2 dedomed U2 1A on copper, direct drive (on a 25R/VTC5 it pulls 5.2A, on an NCR18650 its ~4). The switch is forward clicky and the tail spring is braided (contact board batt terminal is solid brass). On my freshly calibrated extech it reads 68,200lux @ 1m*. I’m asking $30 SOLD! as is or for $38 I will swap the direct drive board to a BLF17DD V2 FET driver with your choice of programming (something simple please, I’m new, driver is built and currently flashed with 3-mode STAR on-time). [Fitted to this light 18650 adapter avaliable free on request]. [or full/partial trades].

Very good condition except for this one ding on the bezel

Solid brass batt+ contact

(measured @ 3m, measured one sample per sec after a 15sec warm-up, averaged reading from 15-45sec on a fresh but rested 25R)

This isn’t what you’re looking for, and I’m guilty of giving it short shrift for a gift, but if you’d be interested in a magnetic-switch, 2xCR123 “dive light” mod host, I’d be interested in the HD2010 with the 18650 sleeve for showing off what a top-kick builder can do. I wish I could afford to just buy it outright.

Here’s my unfair description of mine:
Intova IFL-660 Waterproof Diving Torch . I haven’t touched it since it was given to me, and it has only eaten one set of batteries, per the honest giver.

To not-even reciprocate your generosity, I’d cover postage both ways. That’s about all I could afford right now.

Laugh if you wanna, but I hate seeing it collect dust, so it’s worth asking you this. I’ll assume “no news” = “NO news” if you don’t feel like this is worth a reply.

Thanks for the offer but I have to decline, I actually have been looking at dive lights for some upcoming summer excursions but I’ve FINALLY got down to a single 1x123 light and don’t want to go the other way, I’m really tired of CR123’s.

For other offers open to single/multiple AA lights or single/multi 18650 & 26650 or even 32650’s. Not interested in AAA or CR123/16340 or 1x18350 lights. Feel free to offer anything, not just stuff off my list.

As well as bulk amounts of nanjg 105c’s I would accept sets of bare components (see digikey shopping cart for BLF15DD v3) as partial trade value.

Tempted by the H501D…! One question in the meantime: could the GITD epoxy you put in the fins be removed in some way?

I’ll trade the HD2010 with FET driver with my TF 3T6 or the new ZY- T08 with aluminum reflector or maybe non working 9T6 ? :bigsmile:

Yes it could, I would do it for you (no charge) if you would comit to it first, it’s not exactly easy, but it’s not rocket science either and it comes off clean. (Done by hand, not power tool and not by sanding so it’s not going to mess the finish up any)

The HD2010 is sold and paid for. Thanks for the interest.

Just noticed you said 501, this is infact an H51d (reflector underneath clear glass, the diffuser layer is stick on and comes right off). The emitter is a Luxeon Rebel HCRI 4200k.

Edit: bump w/ price drop, need this gone today, you will not find a better ZL headlight for lower than this.

I’ll take the ZL. :slight_smile:

PM sent, we’ll work out the payment details there.

ZL is SOLD to Keithd!