3021 posts Giveaway - Lots of drivers and emitters (winner announced)

EDIT: Post 15, was the lucky number.

kragmutt is the winner.

Congratulations!


3021 posts..

:party: :beer:


Do you like to mod? But does not always need the latest, best and most expensive stuff..

Or would you like to start, but are afraid of ruining parts.

Then this give way is for you..

Stuff in this giveaway

Lots of drivers :

3 amp V10+

5 amp V10+

Driver from Fenix E15

5 amp DUP-S5 from lck-led

LD-34 (Stock driver from BTU shocker)

Half ruined Flex Asgard bluetooth driver (comes with thermal pad, contact board, BT antenna wire. If you are smart "fix" this with a hammer or take off useful parts)

A 6-18V driver from Lightscastle. Supposedly 3A. More like 2,5A after a little resistor mod.

17mm 5 mode driver from KD, peak output up towards 2,6A (with a typical panasonic cell).

Driver circuit from a TR-J18 (2 cell 2A+?)


Lots of emitters

Lots of CW XM-Ls. Some XP-Gs, one NW 80+ CRI XB-D 3C on a crappy mcpcb. Some emitters does not come with mcpcb. I have XM/XP mcpcbs.. 10+ emitters total

If you don't need these for lights. It can be nice to have spare emitters for bench setup, testing, practicing reflows, dedoming projects etc.....


2 Green tailcaps


Conditions of all items in this giveaway are "as delivered".


When does the giveaway end?

-When I say so.


How to join the giveaway?

-The magic words are "I love junk".

-Optional: Post picture of junk/trash or something related to it

10+ emitters :heart_eyes: Others would likely use the drivers more the I would so I’ll likely pass my chance on to them.

I love junk so I can have junk to post pics J)

I love junk! Thanks for the giveaway!

There has to be some treasures too. ;)

Although, I was not too impressed by it.. The "crappy mcpcb" is a cut a bit badly in order to make it a tad smaller than stock..

I LOVE JUNK!!!

Would love to have that 5amp v10

I love Junk ! - in many ways because i can build stuff out of it. :slight_smile:
Count me in.
Both my brother and i collect Chainsaws too, and heres a pile of junker saws we bought at an auction a few years ago for 100 bucks:

I love junk!!!

Thanks for the giveaway RaceR86 :party:

@denbarrett: wow that’s a lot of junk :beer:

DBSAR, when the Zombie Apocalypse hits I’m heading to your place!

cdc.gov - Preparedness 101: Zombie Apocalypse

Will posting more then once interfere with the giveaway?

Thanks RaceR! I have a few things that could use some new life. I love junk.

I love junk!

What a unique giveaway!

3000 posts? You seriously need a life buddy. DBS, you should not of posted that picture, I need some parts for an old McCulloch.

I love junk especially the stock btu driver junk :slight_smile:

Nope. But I will only use peoples 1st post as their "winning ticket" in case someone posts several times.

[quote=AlexGT] I LOVE JUNK!!! Would love to have that 5amp v10 [/quote]

Cool!

I can warn you and others though.. Its not really 5 amp.. Maybe if you have 4,2v input from a powersupply.. I have not used it much, but I think that I liked the 3A version better.

Its a long time since I tested /used these, but with the 3 amp version you have better mode spacing if I recall correctly. Might be because the 5amp version does not give you full output at 5Amp, but medium still remains medium, so they end up being closer. Lower might have been higher on the 5 amp version too.

There is a little row with resistors on these drivers, so it looks like it easy to convert from 3A to 5A or 5A to 3A.

Something the winner can play with if he/she wants to. :)

I love junk! In fact, I need more flashlight junk in my junk trunk. See, I’ve been in a bit of a funk…

Cool idea bro. I love junk


edited

Yeah, I know mate...

....

*trying to figure out something cool to do*

...

race you to 4K? :)

oh, wait..

if you dont believe:

be my guest in Austria and visit my basement… >)

€dith wants to know:

do you split the goodies to make more than one happy?
or do you put all the parts in one bag and send them?

i love junk