SOLD: RGBW SinkPads for Color XM-L and Luxeon Rebles <---- They are here!!!!

37 posts / 0 new
Last post

Pages

vestureofblood
vestureofblood's picture
Offline
Last seen: 3 days 5 hours ago
Joined: 08/17/2012 - 15:21
Posts: 2040
Location: Missouri
SOLD: RGBW SinkPads for Color XM-L and Luxeon Rebles <---- They are here!!!!

Hi everyone,         EDIT: BOARDS HAVE ARRIVED!!

 

 

I will be placing my next SinkPad order soon.   I intend to purchase some of the new 20mm RGBW pads.    These are aluminum boards, however they provide vastly superior thermal transfer over standard MCPCBs, and even over the typical aluminum SinKpad.

Standard MCPCBs average 1-4 W/mk.    AL sinkpad typical is 135 W/mk and these are 210 W/wmk! 





For this pre sale the price will be $1.50 each.   

Shipping is $4 USA and $7 World wide.

PP is vesture_of_blood@hotmail.com

 

 

I will be placing the order within one week of this post.     If you have any questions feel free to ask.   

 

 

Also if anyone has a particular driver they like to use with RGBW feel free to mention it.   Personally I have used the intloutdoors one and think its great Smile

 

 EDIT:  If enough people are interested I will also order Luxeon Rebel boards.    We will be ordering the RGBW regardless of the number purchased. 

In Him (Jesus Christ) was life; and the life was the light of men. And the light shineth in darkness; and the darkness comprehended it not.
http://asflashlights.com/ Everyday Carry Flashlights, plus Upgrades for Maglite.

Edited by: vestureofblood on 02/16/2015 - 16:56
vestureofblood
vestureofblood's picture
Offline
Last seen: 3 days 5 hours ago
Joined: 08/17/2012 - 15:21
Posts: 2040
Location: Missouri

 

1. djozz 1

2. Cereal_Killer 10

3. Tom E 4

4.

5.

6.

7.

 

If 45pc are committed to Rebel boards will also be ordered. Price will be the same for these.  Here is the list so far.

1. djozz 10

2. Cereal_Killer 4

3. hank 4

In Him (Jesus Christ) was life; and the life was the light of men. And the light shineth in darkness; and the darkness comprehended it not.
http://asflashlights.com/ Everyday Carry Flashlights, plus Upgrades for Maglite.

djozz
djozz's picture
Offline
Last seen: 5 days 5 hours ago
Joined: 09/07/2012 - 17:04
Posts: 18319
Location: Amsterdam

Hi vob, that is a great offer! I would be interested in (just Cry) one xmlcolour Sinkpad, but even more in a few (say four) Rebel Sinkpads, is it possible to include a couple of those in your order? It would make the shipping a bit more worthwile for me as well.

BTW, for anyone using it, I read a post on cpf of someone (conte) who swapped a resistor on the 17mm intl-outdoor driver so the white die of the xmlcolour was driven at 1.3A instead of 700mA.

Edit: found, http://www.candlepowerforums.com/vb/showthread.php?387057-RGBW-XML-Drive...

nofearek9
nofearek9's picture
Offline
Last seen: 9 hours 45 min ago
Joined: 07/08/2012 - 08:46
Posts: 1357
Location: Cyprus

nice mod

vestureofblood
vestureofblood's picture
Offline
Last seen: 3 days 5 hours ago
Joined: 08/17/2012 - 15:21
Posts: 2040
Location: Missouri

djozz.   I will add you to the list.    I would be happy to order any kind of pads the group wants, but there is a minimum purchase of 45 piece.   If we can get above that I would order some.

In Him (Jesus Christ) was life; and the life was the light of men. And the light shineth in darkness; and the darkness comprehended it not.
http://asflashlights.com/ Everyday Carry Flashlights, plus Upgrades for Maglite.

Cereal_killer
Cereal_killer's picture
Offline
Last seen: 3 years 1 month ago
Joined: 07/22/2013 - 13:10
Posts: 4005
Location: Ohio

Hey guys Matt asked me to post in this thread about my new RGBW_clicky driver to see if another driver option (with a great UI) could drum up some more interest in these... I have my driver ready to ship, you can read about the build progress "here":http://budgetlightforum.com/node/33479, note I will be posting a detailed thread of the light I'm offering for sale, as well as the driver (which will be $13) and both the options it has at the time of ordering (code stuff) as well as the end-user configurable options (max power via sense resistors and reset time via a cap change).

Sales thread just went live: Click here

Watch for all that info and plenty of pic's in a sales thread later today (I'll come back and update this post with that thread then) This driver can run multi emitters on single or quad MCPCB's as well as XML colors (I have lights with both setup's running).

 

As discussed I'll take 10 the moment you get them in and then plan on me needing more not long after.

 

 

Left = A6 RGBW quad (the lights I'm selling), right = one of my test hosts with XML color (gen2) on a sinkPAD. 

Please don't ask questions about the driver/lights in this thread, this is VOB's interest thread not my sales thread, please let's keep OT here so he can get the info he needs without a bunch of clutter.

 RIP  SPC Joey Riley, KIA 11/24/14. Now I am become death, the destroyer of worlds.

djozz
djozz's picture
Offline
Last seen: 5 days 5 hours ago
Joined: 09/07/2012 - 17:04
Posts: 18319
Location: Amsterdam

vestureofblood wrote:

djozz.   I will add you to the list.    I would be happy to order any kind of pads the group wants, but there is a minimum purchase of 45 piece.   If we can get above that I would order some.

I guess that there'd be not enough interest in Sinkpads for Rebel leds, BLF being so Cree-oriented (for good reason mostly btw, but for diversity of colour leds the Rebel rules).But in case I'm not the only one: I would take 10 Rebel Sinkpads, so the question is if there's interest for the other 35 within this week?

vestureofblood
vestureofblood's picture
Offline
Last seen: 3 days 5 hours ago
Joined: 08/17/2012 - 15:21
Posts: 2040
Location: Missouri

I assume this is the board your speaking of correct?

 

 

I will add the option to the list.   

In Him (Jesus Christ) was life; and the life was the light of men. And the light shineth in darkness; and the darkness comprehended it not.
http://asflashlights.com/ Everyday Carry Flashlights, plus Upgrades for Maglite.

djozz
djozz's picture
Offline
Last seen: 5 days 5 hours ago
Joined: 09/07/2012 - 17:04
Posts: 18319
Location: Amsterdam

vestureofblood wrote:

I assume this is the board your speaking of correct?

 

 

I will add the option to the list.   

Correct, thanks for the suggestion in the OP, who knows there are more Rebel fans Smile

Cereal_killer
Cereal_killer's picture
Offline
Last seen: 3 years 1 month ago
Joined: 07/22/2013 - 13:10
Posts: 4005
Location: Ohio

I’ll take some of those too! Let’s say 3-4 for now. Is there a 16mm rebel option? I would be interested in more of they were 16 but it doesn’t look like it’ll be possible to shave those to 16 cause of the pad location.

Also is the thermal pad perfectly centered (so the die will be perfectly centered) or is the whole emitter centered meaning the die will be slightly offset?

 RIP  SPC Joey Riley, KIA 11/24/14. Now I am become death, the destroyer of worlds.

hank
hank's picture
Offline
Last seen: 2 hours 39 min ago
Joined: 09/04/2011 - 21:52
Posts: 9639
Location: Berkeley, California

The emitters were centered on the 20mm ones I got pre-populated from Luxeonstar, these:
http://www.luxeonstar.com/luxeon-rebel-star-leds
(they aren’t selling Sinkpad2 boards unpopulated on their site yet, if ever)
As far as I know there are no 16mm round plates offered anywhere (dagnabbit)
(For their 10mm square boards the emitters are slightly off center, just barely so.)

Tom E
Tom E's picture
Offline
Last seen: 5 months 1 week ago
Joined: 08/19/2012 - 08:23
Posts: 15065
Location: LI NY

Put me down for qty 4. No idea when or how yet, but like the idea of converting a 20mm XML light. I'll be interested in sources for best deals on the LED's and drivers.

hank
hank's picture
Offline
Last seen: 2 hours 39 min ago
Joined: 09/04/2011 - 21:52
Posts: 9639
Location: Berkeley, California

I’ll commit to take 4 Rebel boards, to nudge it along

vestureofblood
vestureofblood's picture
Offline
Last seen: 3 days 5 hours ago
Joined: 08/17/2012 - 15:21
Posts: 2040
Location: Missouri

List has been updated. 

In Him (Jesus Christ) was life; and the life was the light of men. And the light shineth in darkness; and the darkness comprehended it not.
http://asflashlights.com/ Everyday Carry Flashlights, plus Upgrades for Maglite.

hank
hank's picture
Offline
Last seen: 2 hours 39 min ago
Joined: 09/04/2011 - 21:52
Posts: 9639
Location: Berkeley, California

The “Sinkpad2” shown here: http://www.luxeonstar.com/assets/images/categories/sinkpad-stars.gif
(from http://www.luxeonstar.com/luxeon-rebel-star-leds )
is a different board — could those be found as bare boards?

vestureofblood
vestureofblood's picture
Offline
Last seen: 3 days 5 hours ago
Joined: 08/17/2012 - 15:21
Posts: 2040
Location: Missouri

The order has been placed.    I went ahead and ordered both the RGBW and the Rebels.

In Him (Jesus Christ) was life; and the life was the light of men. And the light shineth in darkness; and the darkness comprehended it not.
http://asflashlights.com/ Everyday Carry Flashlights, plus Upgrades for Maglite.

djozz
djozz's picture
Offline
Last seen: 5 days 5 hours ago
Joined: 09/07/2012 - 17:04
Posts: 18319
Location: Amsterdam

vestureofblood wrote:

The order has been placed.    I went ahead and ordered both the RGBW and the Rebels.

That is great news! I hope that there will be enough interest for the remainder of the Rebel boards!

Cereal_killer
Cereal_killer's picture
Offline
Last seen: 3 years 1 month ago
Joined: 07/22/2013 - 13:10
Posts: 4005
Location: Ohio

Thats good to hear, I used my last one this morning finishing my most recent MELD light so definitely need more ASAP!

If anyone is planning on using these with a gen 1 XML color IGNORE ALL POLARITY MARKINGS, they are not even close to correct!

 RIP  SPC Joey Riley, KIA 11/24/14. Now I am become death, the destroyer of worlds.

vestureofblood
vestureofblood's picture
Offline
Last seen: 3 days 5 hours ago
Joined: 08/17/2012 - 15:21
Posts: 2040
Location: Missouri

The boards are here.

 

 

 

 

At the time of this post I have

30 pc of the RGBW available

45 pc of the Luxeon Rebel available

In addition I also have 45 pc of the aluminum XML sinkpads if anyone is interested in experimenting with those.  

Price for the RGBW and the Luxeon is $1.50 each and the Aluminum XML are $1 each.

Shipping is $4 USA $7 World wide.

Since no one prepaid all boards are sold on FCFS basis.

PP is vesture_of_blood@hotamil.com


Thanks everyone.

In Him (Jesus Christ) was life; and the life was the light of men. And the light shineth in darkness; and the darkness comprehended it not.
http://asflashlights.com/ Everyday Carry Flashlights, plus Upgrades for Maglite.

djozz
djozz's picture
Offline
Last seen: 5 days 5 hours ago
Joined: 09/07/2012 - 17:04
Posts: 18319
Location: Amsterdam

jay!

Do the Rebel boards also cost 1.50 each?

vestureofblood
vestureofblood's picture
Offline
Last seen: 3 days 5 hours ago
Joined: 08/17/2012 - 15:21
Posts: 2040
Location: Missouri

djozz wrote:

jay!

Do the Rebel boards also cost 1.50 each?

 

Ya, I was editing the post when you asked Smile

In Him (Jesus Christ) was life; and the life was the light of men. And the light shineth in darkness; and the darkness comprehended it not.
http://asflashlights.com/ Everyday Carry Flashlights, plus Upgrades for Maglite.

djozz
djozz's picture
Offline
Last seen: 5 days 5 hours ago
Joined: 09/07/2012 - 17:04
Posts: 18319
Location: Amsterdam

vestureofblood wrote:

djozz wrote:

jay!

Do the Rebel boards also cost 1.50 each?

 

Ya, I was editing the post when you asked Smile

Smile PP sent, thanks!

Cereal_killer
Cereal_killer's picture
Offline
Last seen: 3 years 1 month ago
Joined: 07/22/2013 - 13:10
Posts: 4005
Location: Ohio

That 30 remaining is after my first 15? If thats all that’s left I’ll take an additional 10.

 RIP  SPC Joey Riley, KIA 11/24/14. Now I am become death, the destroyer of worlds.

vestureofblood
vestureofblood's picture
Offline
Last seen: 3 days 5 hours ago
Joined: 08/17/2012 - 15:21
Posts: 2040
Location: Missouri

Yep, that was 15 for you and 5 for me brought us to 25.   Djozz took one with his order too.

So 24 RGBW

and 35 Rebel

In Him (Jesus Christ) was life; and the life was the light of men. And the light shineth in darkness; and the darkness comprehended it not.
http://asflashlights.com/ Everyday Carry Flashlights, plus Upgrades for Maglite.

Cereal_killer
Cereal_killer's picture
Offline
Last seen: 3 years 1 month ago
Joined: 07/22/2013 - 13:10
Posts: 4005
Location: Ohio

Matt, I sent payment for only 5 additional, I decided by the time I use my 20 of them I need to shut up and buy a batch direct from sinkpad myself so I wanted to leave them in stock for people who only need one at a time.

 RIP  SPC Joey Riley, KIA 11/24/14. Now I am become death, the destroyer of worlds.

Tom E
Tom E's picture
Offline
Last seen: 5 months 1 week ago
Joined: 08/19/2012 - 08:23
Posts: 15065
Location: LI NY

Just PP'ed for 4 RGBW boards. Thanx!

vestureofblood
vestureofblood's picture
Offline
Last seen: 3 days 5 hours ago
Joined: 08/17/2012 - 15:21
Posts: 2040
Location: Missouri

I have 35 of the rebel boards left, 4 of the RGBW, and 45 of the aluminum XML at the time of this post.

In Him (Jesus Christ) was life; and the life was the light of men. And the light shineth in darkness; and the darkness comprehended it not.
http://asflashlights.com/ Everyday Carry Flashlights, plus Upgrades for Maglite.

Tom E
Tom E's picture
Offline
Last seen: 5 months 1 week ago
Joined: 08/19/2012 - 08:23
Posts: 15065
Location: LI NY

Got mine today. Thanx Matt!

Anyone have any idea where I can buy bare LED's at a reasonable price?

Cereal_killer
Cereal_killer's picture
Offline
Last seen: 3 years 1 month ago
Joined: 07/22/2013 - 13:10
Posts: 4005
Location: Ohio

Nowhere, they’re $15 at digikey, I.O. and Mtn both have them mounted for $12

 RIP  SPC Joey Riley, KIA 11/24/14. Now I am become death, the destroyer of worlds.

Cereal_killer
Cereal_killer's picture
Offline
Last seen: 3 years 1 month ago
Joined: 07/22/2013 - 13:10
Posts: 4005
Location: Ohio

16mm xml color sinkPAD!

 RIP  SPC Joey Riley, KIA 11/24/14. Now I am become death, the destroyer of worlds.

Bad Karma
Offline
Last seen: 5 months 2 weeks ago
Joined: 08/30/2013 - 21:00
Posts: 8
Location: California, US

Anyone offer these with RGBW XML’s on them? I don’t have a reflow oven…

Pages