WTB Small Sun ZY-T08 modded

7 posts / 0 new
Last post
akoposilester
akoposilester's picture
Offline
Last seen: 1 year 8 months ago
Joined: 07/12/2014 - 01:09
Posts: 547
Location: SEA
WTB Small Sun ZY-T08 modded

Wanted to buy Small Sun ZY-T08, MODDED
PM me for the price and specs.
Looking for my 1st budget thrower.

Thank you

FL Newbie

n10sivern
n10sivern's picture
Offline
Last seen: 2 days 21 hours ago
Joined: 11/09/2014 - 21:37
Posts: 1549
Location: biloxi, ms

I have a T08 that I haven’t modded yet. What are you wanting? I can direct drive it with a XP-G2, XP-L, XM-L2. Upgrade the tail switch to an Omten. Let me know what you want.

Three tomatoes are walking down the street- a poppa tomato, a momma tomato, and a little baby tomato. Baby tomato starts lagging behind. Poppa tomato gets angry, goes over to the baby tomato, and smooches him… and says, Catch up.

LightsCastle
LightsCastle's picture
Offline
Last seen: 4 years 8 months ago
Joined: 10/27/2013 - 21:51
Posts: 294
Location: shenzhen,China

Hi ,
This is Lightscastle.We are professional flashlight shpllier.
Go to our website.http://www.lightscastle.com/product/small-sun-zy-t08-cree-xm-l-t6-635lm-5-mode-white-light-flashlight—black-2-x-18650-417172
Hope you like it.

A professional website selling flashlights, wrist watches, lasers, chargers, batteries and other intersrting outdoor sport products 

Mike C
Mike C's picture
Offline
Last seen: 7 hours 41 min ago
Joined: 01/22/2014 - 08:03
Posts: 2606
Location: Sweden

I’m a little behind on my ZY-T08 project. I’ve designed a 7135 based driver for easy series conversion together with a custom designed switch board replacement with holes that perfectly fit the larger square Omten switch. I’ve got XHP70s and MT-G2 LEDs (domed and dedomed) to try out in ut. I have the driver and switchboard assembled but haven’t gotten started on the firmware for it (ATtiny84 based). Once I’m done I’ll have two conversion kits left over as minimum order for board fabrication is three. Don’t know if I’ll build two more complete lights and sell them, sell the boards separately or just keep them…. I also don’t know how “budget” they would be. Probably a bit overkill for a first thrower though…

Wrathbringer27
Wrathbringer27's picture
Offline
Last seen: 1 day 7 hours ago
Joined: 03/02/2015 - 09:00
Posts: 2132
Location: Singapore GMT +8

Mike C wrote:
I’m a little behind on my ZY-T08 project. I’ve designed a 7135 based driver for easy series conversion together with a custom designed switch board replacement with holes that perfectly fit the larger square Omten switch. I’ve got XHP70s and MT-G2 LEDs (domed and dedomed) to try out in ut. I have the driver and switchboard assembled but haven’t gotten started on the firmware for it (ATtiny84 based). Once I’m done I’ll have two conversion kits left over as minimum order for board fabrication is three. Don’t know if I’ll build two more complete lights and sell them, sell the boards separately or just keep them…. I also don’t know how “budget” they would be. Probably a bit overkill for a first thrower though…

A light is NEVER overkilll Wink Even for a first thrower. I had an L4 for a first ‘thrower’. Smile

Words can be broken,
so can bones.

LEDCODER
Offline
Last seen: 6 years 4 months ago
Joined: 11/22/2014 - 12:29
Posts: 51
Location: UK

let me know if you want to sell the drivers and what price?
modding 2 myself and cant choose what driver to use.

bibihang
bibihang's picture
Offline
Last seen: 6 hours 26 min ago
Joined: 11/10/2011 - 09:32
Posts: 2446
Location: Malaysia

I need that custom buck driver for T08! Please make it happen!