Nitecore EC4 Updated Beamshots

LED Flashlights – General Info
1

Got this in the mail today from andrew-amanda.com…going to take a few beamshots tonight.

The only light that I was able pit against the EC4 was a XinTD V5 C8 with a U3 1A in it. Of course I knew it would be a little brighter but I didn’t realize it would throw a little further. I’m still impressed with the overall feel of the light, everything seems to work as it should and I haven’t had any problems with it other than a very minute piece of annodization is missing on the light. All button top batteries I’ve used in it have worked fine. Flat top batteries do work but they tend to rattle a bit so, lengthening the springs with needle nose pliers will probably do the trick. Both lights were tested using Efest 2500mah 18650 35A IMRs.

XinTD

EC4

XinTD

EC4

EC4 Left XinTD Right


2

Nice!! Can’t wait to see the beam profile! :party:

3

Looking good! Neutral or Cool?

4

I've got one coming for review from BG, in the next week or two. Interesting light.

5

updated

6

Now if the EC4 was 2s so it was XHP50 dropin upgradeable then we would be talking!

Ill wait to see the EC4S

7

Thanks for the beamshots! The reflector looks like the same one from the EA4/41 (also DPOT), not much of a thrower but the beam is smooth!

8

i think it called PDOT :slight_smile: