New Driver: PD68 "Solo" 10mm - Single 7135

4 posts / 0 new
Last post
pilotdog68
pilotdog68's picture
Offline
Last seen: 2 months 3 weeks ago
Joined: 05/30/2013 - 23:31
Posts: 6420
Location: Held against my will in IOWA, USA
New Driver: PD68 "Solo" 10mm - Single 7135

I made this specifically for my Sf-348/BLF-348 and figured I’d share it with the community in case anyone else was interested. It is very very similar to the BLF “Tiny10” driver that came out some time ago. I just re-did the layout a little more to my liking and removed the RVP diode to fit pads for an OTC. That’s right, no reverse-polarity protection with this driver. The MCU will go to the battery side and it will be your batt+ contact. You will need to attach a piece of copper sheet/wire/braid over the mcu connected to the larger rectangle pads. It shouldn’t be any problem to stack an extra 7135 as long as the pill allows the extra height. This will make your light li-ion only.


My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver

Edited by: pilotdog68 on 01/01/2016 - 00:55
SawMaster
Offline
Last seen: 1 year 4 months ago
Joined: 05/03/2015 - 17:18
Posts: 1802
Location: SC USA

And nice to see work happen for small lights.

Phil

cbrake10
Offline
Last seen: 3 months 1 week ago
Joined: 11/25/2014 - 17:04
Posts: 488
Location: Alabama

Very cool. Thanks pd

-Clark

pilotdog68
pilotdog68's picture
Offline
Last seen: 2 months 3 weeks ago
Joined: 05/30/2013 - 23:31
Posts: 6420
Location: Held against my will in IOWA, USA

thanks for the kind words

My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver