Zebralight SC600w L2 vs 3× 219C R9050 sm403 @5.3 amps under Ledil Cute 3 Medium
Zebralight SC600w L2
3× 219C R9050 sm403 @5.3 amps under Ledil Cute-3-M
3× 219C R9050 sm403 @5.3 amps under Ledil Cute-3-SS
EDIT: Well, I have absolutely no idea why the images don’t show up for me.
EDIT2: Ok, now they should work. Did nothing different, just uploaded somewhere else.
Peaches? Looks yummy
The difference isn’t too great to my eyes. Did you set the white balance to manual/auto?
The sm403 looks whiter than it actually is. Or was it the snow?
haha, those are apples. Probably not yummy anymore. Shot in RAW, if I set the white balance to 4000K this shot looks a bit too warm, to my eyes, on my screen. I agree the difference in a these shots isn’t that obvious as it is to my eyes, but I think even in these pics the reds look much better and realer with the Nichias.
haha, those are apples. Probably not yummy anymore. Shot in RAW, if I set the white balance to 4000K this shot looks a bit too warm, to my eyes, on my screen. I agree the difference in a these shots isn’t that obvious as it is to my eyes, but I think even in these pics the reds look much better and realer with the Nichias.
I use 5600K with all my beamshots, no matter what CCT the flashlights are. It’s the closest white balance to the reality (in case with my Olympus OM-D EM5). Just to get same baseline.
Frozen apples….you can kill cats with that.
@clemence
if I set the white balance to 4000K this shot looks a bit too warm, to my eyes, on my screen. I agree the difference in a these shots isn’t that obvious as it is to my eyes, but I think even in these pics the reds look much better and realer with the Nichias.
If you set the white balance (reference) to a lower K, I would expect a cooler picture?
I wonder about the big difference in tint between the Cute-3-M and the warmer Cute-3-SS. But imo They are both nice tints.
@clemence
if I set the white balance to 4000K this shot looks a bit too warm, to my eyes, on my screen. I agree the difference in a these shots isn’t that obvious as it is to my eyes, but I think even in these pics the reds look much better and realer with the Nichias.
If you set the white balance (reference) to a lower K, I would expect a cooler picture?
I wonder about the big difference in tint between the Cute-3-M and the warmer Cute-3-SS. But imo They are both nice tints.
Yes, you’re correct. The WB in the first shot is set around 3400K.
You mean, you see a big difference in tint between the last two shots? Or is it something you found when playing with these lenses? I haven’t recognized a big difference in tint between the two. Note that these are two lights, I haven’t changed optics on the go. Cheers
Set to 3400K? No wonder they’re look so cold. What is your exact camera model? Did you remember the focal length used?
I will try to edit them with my DxO later
Set to 3400K? No wonder they’re look so cold. What is your exact camera model? Did you remember the focal length used?
I will try to edit them with my DxO later
Thanks,
Clemence
Hi Clemence,
I have a Nikon D7100 with just a 18-105 zoom (a bit lame, I know), these were all shot at 18mm. I can send you the RAW files if you’d like to play with them. I have tried lightroom and Capure One, but with these third party softwares I don’t get the colors that I get with Nikon ViewNX.
Set to 3400K? No wonder they’re look so cold. What is your exact camera model? Did you remember the focal length used?
I will try to edit them with my DxO later
Thanks,
Clemence
Hi Clemence,
I have a Nikon D7100 with just a 18-105 zoom (a bit lame, I know), these were all shot at 18mm. I can send you the RAW files if you’d like to play with them. I have tried lightroom and Capure One, but with these third party softwares I don’t get the colors that I get with Nikon ViewNX.
Cheers!
That would be great. Can you winrar them and put in a cloud drive? I’ll download and play with them. Just send me the link. Thanks
Great, the tint is so lovely, 3000k with a mind pink in it, exacly as it should be
You know, those emitters 3000k should be made a standart for blood tracing flashlights, i made a S2 with it and i can clearly see a drop of blood even on a pile of brown leaves at 5 meters in spite of my eyes arent as they were when i was 20, great R9 indeed
But with 5 or 7 steps you could end up with something more towards BBL (BelowBlackbodyLocus) like those sw45k 219B. With sm303 you could get less pink than sm305 though. It’s a matter of luck.
Zebralight SC600w L2 vs 3× 219C R9050 sm403 @5.3 amps under Ledil Cute 3 Medium
Zebralight SC600w L2
3× 219C R9050 sm403 @5.3 amps under Ledil Cute-3-M
3× 219C R9050 sm403 @5.3 amps under Ledil Cute-3-SS
EDIT: Well, I have absolutely no idea why the images don’t show up for me.
EDIT2: Ok, now they should work. Did nothing different, just uploaded somewhere else.
can’t see the pics
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Sorry, seemed to be a problem with imgur. Uploaded the same files to abload.de and it seems to work now.
Peaches? Looks yummy
The difference isn’t too great to my eyes. Did you set the white balance to manual/auto?
The sm403 looks whiter than it actually is. Or was it the snow?
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
I got my 144a leds yesterday… Can’t wait until the new mcpcbs are available in February.
@clemence
haha, those are apples. Probably not yummy anymore. Shot in RAW, if I set the white balance to 4000K this shot looks a bit too warm, to my eyes, on my screen. I agree the difference in a these shots isn’t that obvious as it is to my eyes, but I think even in these pics the reds look much better and realer with the Nichias.
I use 5600K with all my beamshots, no matter what CCT the flashlights are. It’s the closest white balance to the reality (in case with my Olympus OM-D EM5). Just to get same baseline.
Frozen apples….you can kill cats with that.
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
The postman has been,and left me 10 Nichias and 5 boards
Thanks again Joz and the team.
If you set the white balance (reference) to a lower K, I would expect a cooler picture?
I wonder about the big difference in tint between the Cute-3-M and the warmer Cute-3-SS. But imo They are both nice tints.
Yes, you’re correct. The WB in the first shot is set around 3400K.
You mean, you see a big difference in tint between the last two shots? Or is it something you found when playing with these lenses? I haven’t recognized a big difference in tint between the two. Note that these are two lights, I haven’t changed optics on the go. Cheers
Hi Chouster,
Set to 3400K? No wonder they’re look so cold. What is your exact camera model? Did you remember the focal length used?
I will try to edit them with my DxO later
Thanks,
Clemence
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
If you have the .RAW file you can easily adjust the WB to 5600K then re-convert it to JPEG. I’m curious to compare it to my Armytek Prime beamshot.
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Hi Clemence,
I have a Nikon D7100 with just a 18-105 zoom (a bit lame, I know), these were all shot at 18mm. I can send you the RAW files if you’d like to play with them. I have tried lightroom and Capure One, but with these third party softwares I don’t get the colors that I get with Nikon ViewNX.
Cheers!
That would be great. Can you winrar them and put in a cloud drive? I’ll download and play with them. Just send me the link. Thanks
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Aight, will do so.
Here’s the peaches:
It seems tinypic (what’s in a name…) downsizes everything over 1600 pixels, so it’s a bit smaller.
Anyway, white balance is now 5600 (was 3400).
@ Chouster: Jeroen already did it, you don’t have to send the RAW file to me.
Pic at the right side looks much better. We get the reds without altering the whites
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Alright, thanks Jerommel.
@jozz
My package arrived today in good condition, thanks!
Sent you a PM with details.
I use 5000K with my Canen 5D Mk2 works out great to show light color
[Reviews] Miboxer C4-12, C2-4k+6k, C2, C4 / Astrolux K1, MF01, MF02, S42, K01, TI3A / BLF Q8 / Kalrus G35, XT11GT / Nitefox UT20 / Niwalker BK-FA30S / Sofirn SF36, SP35 / Imalent DM21TW / Wuben I333 / Ravemen PR1200 / CL06 lantern / Xanes headlamp
[Mods] Skilhunt H03 short / Klarus XT11GT, XT12GTS / Zebralight SC50+ / Imalent DM21TW / colorful anodisation
[Sale]
Drivers: overview of sizes and types
DD+AMC based drivers Anduril or Bistro OTSM 12-24mm, S42, 24-30mm L6, Q8, MF01(S), MT03, TN42
Anduril or Bistro 8A buck driver for 20-30mm, MF01/02/04, TN40/42, Lumintop GT, MT09R
UVC and UVC+UVA drivers
programming key
Remote switch tail DD board with FET
Aux boards:
Emisar D1, D1S, D4, D4S, D18, Lumintop FW3A, Fireflies ROT66, Astrolux MF01, Tail boards like S2+
It’s one of the best full sensor today, I wish I have it.
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Got my pile of parts in today. Thanks again TA and Clemence and everyone else. Time to get to work!
Hi I got my LED’s. big cheers from London.
Any chance of catching some 3500k Nichia still ?.
Looking for 2 more. 3 maybe.
Thanks.
Elzetta Bones.
There will be plenty of 2700K – 5700K 9050 219Cs soon
Cheers,
Clemence
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Those 3.5k and 4k 3steppers are Imbalanced indeed, the tint has nothing to do with the KD ones, absoluteny nothing to do
Great emitters, especialy for high end DIY home spots!
Clemence, i am quite impatient about 303 binned ones m8
Language glitch here…..what do you mean?
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
sm 303 of course, if they are awailable
This time, all those 2700K-5700K 219C will be no less than 3 steps binned
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Great, the tint is so lovely, 3000k with a mind pink in it, exacly as it should be
You know, those emitters 3000k should be made a standart for blood tracing flashlights, i made a S2 with it and i can clearly see a drop of blood even on a pile of brown leaves at 5 meters in spite of my eyes arent as they were when i was 20, great R9 indeed
But with 5 or 7 steps you could end up with something more towards BBL (BelowBlackbodyLocus) like those sw45k 219B. With sm303 you could get less pink than sm305 though. It’s a matter of luck.
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Pages