Pity there’s no cyan / turquoise samples in between blue and green there.
No purple either..
That’s all I could get from the paint store. Next time I’ll try to get more complete colour cards. Took me 2 hours just to get them glued evenly.
O… Sorry.. GREAT job, Clemence !!
I think we’re looking for a “color wheel” though:
BUT, when you print it it will be made up of yellow, red and blue, so that wouldn’t work either…
Maukka probably knows what you would need.
Quote:
But now we know that UV plays important role in making anything looks more natural, something not included in CRI colour sample.
- Clemence
Hmmm…
So basically true daylight from an LED would also need UV then..
Cyan is difficult too.
That would mean you have to add a 400nm LED and a cyan LED to it..
And while you’re at it, still a little more deep red..
I think it’s mainly caused by the glue spray I used. I wiped the excess sticky stuff on the cards with wet towel, thus the smear marks. Some materials respond stronger to UV.
Yeah, I’m just wondering how the stuff outdoors responds to it. It must have at least a small effect on some surfaces.
clemence wrote:
Please don’t, high CRI minus the UV is much better for our eyes
Don’t worry, I wouldn’t do something that stupid. Those LEDs are good enough for me. I just wish I could easily light the whole house with them.
Sorry guys, the package from Clemence to me is stuck somewhere in the Netherlands since last sunday. 17track.net says ‘on hold’, Postnl does not recognise the barcode (yet). Could be hold up by customs, I don’t know.
I hate to be in this position, I owe $600 worth of leds to people that I want to deliver and the mail holds the package at an unknown place for unknown reason, even though it was carefully sent by Clemence (and payed for by me) trackable, insured and as an EMS package for priority.
I sometimes think that as long as you send stuff as an unmarked untracked and uninsured package, it arrives without problems and on time, and if you want the mail to care about the delivery, the whole process slows down and the package gets stuck in random places.
Sorry guys, the package from Clemence to me is stuck somewhere in the Netherlands since last sunday. 17track.net says ‘on hold’, Postnl does not recognise the barcode (yet). Could be hold up by customs, I don’t know.
I hate to be in this position, I owe $600 worth of leds to people that I want to deliver and the mail holds the package at an unknown place for unknown reason, even though it was carefully sent by Clemence (and payed for by me) trackable, insured and as an EMS package for priority.
I sometimes think that as long as you send stuff as an unmarked untracked and uninsured package, it arrives without problems and on time, and if you want the mail to care about the delivery, the whole process slows down and the package gets stuck in random places.
I feel bad to make it “marked” but I didn’t want to just send USD600 worth of package without a clear declaration to the post office. I do hope it’s held by the custom rather than lost. I put your number on the package Jos, they should call you when it’s sorted out.
Don’t worry and don’t feel bad Jos. Nobody here is going to hold it against you because delay is not fault and situation is out of your hands at this moment.
I received my 3000k emitters today and built up a couple of copper S2+ pills – a single and a triple. Both use the new Convoy driver – the single has 1.5a max and the triple has 3a max and narrow frosted optic. The tint is wonderful. These will be my most used lights for around the house, backpacking, bikepacking, etc.
Thanks to all the folks who put time and energy into obtaining and distributing these fantastic LEDs.
I received my 3000k emitters today and built up a couple of copper S2+ pills – a single and a triple. Both use the new Convoy driver – the single has 1.5a max and the triple has 3a max and narrow frosted optic. The tint is wonderful. These will be my most used lights for around the house, backpacking, bikepacking, etc.
Thanks to all the folks who put time and energy into obtaining and distributing these fantastic LEDs.
Good for you. Let’s hope I could get wider CCT selection next time
I agee, the tint is fantastic, I wish I had the funds to get the last remaining ones, Sadly not even sure I will be able to afford the ones I already have my name on lol.
I have built a few lights so far and building more over the next few days.
I also ran a full output test that lines up with djozz earlier 219C I will be posting at some point.
I was worried that 4000k could be too warm but it is perfect for me!
I agee, the tint is fantastic, I wish I had the funds to get the last remaining ones, Sadly not even sure I will be able to afford the ones I already have my name on lol.
I have built a few lights so far and building more over the next few days.
I also ran a full output test that lines up with djozz earlier 219C I will be posting at some point.
I was worried that 4000k could be too warm but it is perfect for me!
I want to see the feedback on that thread to standaridize my layout before posting more but I will be sure to post a link here when I get to the 219C. Also got some XHP35 and even a latticebright “XM-L” test ready…..
This really pisses me off..
I mean WTF !?
It’s not drugs or fake Rolexes something..
And why don’t they contact Djozz?
Probably some @$$hole pencil pusher with no purpose in life trying to make others as miserable as himself.
Just so Dutch…
You also have to remember that it is 10 days until Christmas, this is THE busiest shipping season of the year by an order of magnitude. I got fedex drivers in my area driving personal vans they are so over loaded! Quite the site to see a minivan pull up in front of your house and a fedex driver hop out with a package lol.
There is not a uhual available in the area either.
Things are usually delayed this time of year, I am actually quite surprised that mine arrived as quickly as it did. I didn’t expect it till about now honestly.
Europe’s packet has been found. It was held by the custom for Jos to get. He can get it as soon as he has a free time.
FYI, the information took a weird path:
- DHL Netherlands – EMS – Indonesian Postal Office -ME!
I wrote Jos’s number in the packet, receipt, insurance, and custom declaration papers. And yet, they still postponed and re-route the information back to me.
The package has been at DHL Amsterdam for a week, they tried to deliver it at the wrong house (the other side of the square where I live) while the number on the package was perfectly correct (Clemence sent me a photo of the package). Then they held the package just waiting for me to respond. But without telling me that they had it or where to look. The original barcode does not work with DHL Netherlands (I checked it all week with all dutch couriers including DHL), the tracking system did not even mention it was DHL who was delivering the package, DHL exchanged the tracking barcode for a DHL freight number that was not made known to me and then it was gone from radar. After a week they finally communicated their freight number back to Indonesia and Clemence PM-ed it to me this morning. Using it I could find back the package in the DHL-site with their request to contact them. Still a mystery to me how they messed up the house number, but I gave them a call and it is now sceduled to be delivered on monday. Let’s pray I will get it then, their stupidity costed a full week, and the leds will now be sent out to the final owners in the middle of the Christmas mayhem
Let’s pray I will get it then, their stupidity costed a full week, and the leds will now be sent out to the final owners in the middle of the Christmas mayhem
In Russia Christmas is celebrated on January 7! So that’s all right
GREAT job, Clemence !!
I think we’re looking for a “color wheel” though:
BUT, when you print it it will be made up of yellow, red and blue, so that wouldn’t work either…
Maukka probably knows what you would need.
Hmmm…So basically true daylight from an LED would also need UV then..
Cyan is difficult too.
That would mean you have to add a 400nm LED and a cyan LED to it..
And while you’re at it, still a little more deep red..
I think i’ll settle for Nichias..
But maybe interesting for EU members:
http://www.ebay.com/sch/m.html?_odkw=&_ssn=jwhpargos&_armrs=1&_osacat=0&...
I meant that sunlight is still better which is no suprise.
Project Excalibur - Next Generation LED Thrower (UPDATE 2018-01-15: 1.7Mcd)
Portable Thrower Comparison
It can be whiter than sunlight though, because sunlight has some narrow bands missing, the ‘Frauenhofer field lines’ i.i.r.c.
Was not expecting a tracking notification from you this soon! Awesome, thanks.
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
For the people who bought the leds via me:
Sorry guys, the package from Clemence to me is stuck somewhere in the Netherlands since last sunday. 17track.net says ‘on hold’, Postnl does not recognise the barcode (yet). Could be hold up by customs, I don’t know.
I hate to be in this position, I owe $600 worth of leds to people that I want to deliver and the mail holds the package at an unknown place for unknown reason, even though it was carefully sent by Clemence (and payed for by me) trackable, insured and as an EMS package for priority.
I sometimes think that as long as you send stuff as an unmarked untracked and uninsured package, it arrives without problems and on time, and if you want the mail to care about the delivery, the whole process slows down and the package gets stuck in random places.
link to djozz tests
I feel bad to make it “marked” but I didn’t want to just send USD600 worth of package without a clear declaration to the post office. I do hope it’s held by the custom rather than lost. I put your number on the package Jos, they should call you when it’s sorted out.
- Clemence
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Edited: tracking number blurred
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Don’t worry and don’t feel bad Jos. Nobody here is going to hold it against you because delay is not fault and situation is out of your hands at this moment.
Courui D01 -Mod ZY-T08 Small Sun -Mod Shadow JM30 Mod - copper edition Brinyte 158B mod - copper brass hybrid
Small sun ZY-T08 Mod II - The Next Generation Small Sun ZY-T08 Best Of Both Worlds Warsun X50 mod - a complete makeover
Maglite 3C Mod - old school style
Hi djozz, I sent you PM other day, about my payment!
sorry, answered
link to djozz tests
Postal nazis…
I received my 3000k emitters today and built up a couple of copper S2+ pills – a single and a triple. Both use the new Convoy driver – the single has 1.5a max and the triple has 3a max and narrow frosted optic. The tint is wonderful. These will be my most used lights for around the house, backpacking, bikepacking, etc.
Thanks to all the folks who put time and energy into obtaining and distributing these fantastic LEDs.
Good for you. Let’s hope I could get wider CCT selection next time
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
I agee, the tint is fantastic, I wish I had the funds to get the last remaining ones, Sadly not even sure I will be able to afford the ones I already have my name on lol.
I have built a few lights so far and building more over the next few days.
I also ran a full output test that lines up with djozz earlier 219C I will be posting at some point.
I was worried that 4000k could be too warm but it is perfect for me!
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Please link your tests here Tex
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Yep, I plan to. I just released my first offical LED test here: http://budgetlightforum.com/node/51481
2200 lumens from an XP-L2!
I want to see the feedback on that thread to standaridize my layout before posting more but I will be sure to post a link here when I get to the 219C. Also got some XHP35 and even a latticebright “XM-L” test ready…..
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
This really pisses me off..
I mean WTF !?
It’s not drugs or fake Rolexes something..
And why don’t they contact Djozz?
Probably some @$$hole pencil pusher with no purpose in life trying to make others as miserable as himself.
Just so Dutch…
You also have to remember that it is 10 days until Christmas, this is THE busiest shipping season of the year by an order of magnitude. I got fedex drivers in my area driving personal vans they are so over loaded! Quite the site to see a minivan pull up in front of your house and a fedex driver hop out with a package lol.
There is not a uhual available in the area either.
Things are usually delayed this time of year, I am actually quite surprised that mine arrived as quickly as it did. I didn’t expect it till about now honestly.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
…maybe i overreacted a little there..
It put a smile on my face
https://www.flickr.com/photos/akrylamid/
Inventory stock update 161217:
- 219C 9050 sm305: (0/95 pcs left)
- 219C 9050 sm353: (0/100 pcs left)
- 219C 9050 sm403: (12/300 pcs left)
- 144A 9050 sm453: (74/100 pcs left)
- 144A 9050 sm503: (90/100 pcs left)
- 144A 9050 sm573: (97/100 pcs left)
- VirEnce 30mmx30mm CDTP board (28/50 pcs left)
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Europe’s packet has been found. It was held by the custom for Jos to get. He can get it as soon as he has a free time.
FYI, the information took a weird path:
- DHL Netherlands – EMS – Indonesian Postal Office -ME!
I wrote Jos’s number in the packet, receipt, insurance, and custom declaration papers. And yet, they still postponed and re-route the information back to me.
I just don’t get it…..
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Finally… good news!
The package has been at DHL Amsterdam for a week, they tried to deliver it at the wrong house (the other side of the square where I live) while the number on the package was perfectly correct (Clemence sent me a photo of the package). Then they held the package just waiting for me to respond. But without telling me that they had it or where to look. The original barcode does not work with DHL Netherlands (I checked it all week with all dutch couriers including DHL), the tracking system did not even mention it was DHL who was delivering the package, DHL exchanged the tracking barcode for a DHL freight number that was not made known to me and then it was gone from radar. After a week they finally communicated their freight number back to Indonesia and Clemence PM-ed it to me this morning. Using it I could find back the package in the DHL-site with their request to contact them. Still a mystery to me how they messed up the house number, but I gave them a call and it is now sceduled to be delivered on monday. Let’s pray I will get it then, their stupidity costed a full week, and the leds will now be sent out to the final owners in the middle of the Christmas mayhem
link to djozz tests
Ah, that’s good news !
In Russia Christmas is celebrated on January 7! So that’s all right
Inventory stock update 161218:
- 219C 9050 sm305: (0/95 pcs left)
- 219C 9050 sm353: (0/100 pcs left)
- 219C 9050 sm403: (11/300 pcs left)
- 144A 9050 sm453: (74/100 pcs left)
- 144A 9050 sm503: (90/100 pcs left)
- 144A 9050 sm573: (96/100 pcs left)
- VirEnce 30mmx30mm CDTP board (28/50 pcs left)
www.virence.com
Physical and thermal properties of solder alloy - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium - Tech Ingredients
Thanks for this opportunity, clemence.
I’m new to flashlight and would like to explore and advance my knowledge about these.
Pages