Here are TKs recent answers to my similar question
ToyKeeper wrote:
I think we’re mostly waiting on communication delays lately. Has been hard to get a response when people are busy trying to catch up from CNY.
ToyKeeper wrote:
I’d give more answers, but it’d only be speculation. I don’t have direct contact with Lumintop, and haven’t seen most of the communication behind the scenes.
As far as features go, I’m not sure about some hardware details like emitter type, but the basic host design is unlikely to change much and the firmware is mostly ready. The UI is Anduril, which is sort of like an evolution of Narsil, so it has lots of features. Smooth ramp or a mode group, both configurable, with lots of extras like blinkies and special modes. I should probably put a summary in one of the first-page posts.
I am currently #758 for 1 flashlight. I would like to add another light to my total request; so, I am requesting to be put down for two (2) lights.
Could whoever is currently keeping track of such things (a truly thankless job!) properly adjust my light-number request? Also, let me know if a different method of making this kind of request is preferred?
pepinfaxera is currently tracking requests. They appeared suddenly from the ether when a need arose, and volunteered for a thankless tedious task. It’s kind of amazing.
… and I started writing a bot to try to do it, but I’ve been dragging my feet and it’s not ready yet.
Where is the new list? Is it the post linked above?
I don’t appear to be on it… that list is missing numbers between #360 and #760. I’m # 378 on the original list, 1pc.
im excited so put me down for 2 more NW
-
i hope there will be a choice of emitters or ……….
after the first run is done, do another GB with a different emitter….
after that do xhp 50 and a reflector
While I don’t know what the emitter will be, I can at least say it won’t be XHP 50. The voltage on those is too high and the driver can’t convert it. That would make this a totally different light.
Where is the new list? Is it the post linked above?
I don’t appear to be on it… that list is missing numbers between #360 and #760. I’m # 378 on the original list, 1pc.
There are 2 lists. The older one on page 1 and the continuation on page 71.
—
Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights
Where is the new list? Is it the post linked above?
I don’t appear to be on it… that list is missing numbers between #360 and #760. I’m # 378 on the original list, 1pc.
JasonWW wrote:
There are 2 lists. The older one on page 1 and the continuation on page 71.
Page 1, List of interests The Miller
numbers from 1 to 763
Page 71, From list of The Miller, bugs corrected.
numbers from 764 to 773
Page 71, Interest list updated by pepinfaxera,
numbers from 774 to the last post.
My problem is
Difficulty to communicatión
I ignore (not speak) (not understand) English Language
.
Only Google Translator
.
pirate joe 22 wrote:
im excited so put me down for 2 more NW
-
i hope there will be a choice of emitters or ……….
after the first run is done, do another GB with a different emitter….
after that do xhp 50 and a reflector
It is at No. 276, 277, 372, 373, 421 and 422 on the Interest list of The Miller, page 1
You are number No. 788 and 789 on this post, updated by pepinfaxera, page 71 http://budgetlightforum.com/comment/1255477#comment-1255477.
Add 8 requests
How many flaslights do you want in total? Total 8 flaslight The FW3A? … Total 12 flaslight The FW3A? … Total 16 flaslight The FW3A? …
Please, say: Total .x. torch; … Total .x. units; … Total .x. flashlight.
Where is the new list? Is it the post linked above?
I don’t appear to be on it… that list is missing numbers between #360 and #760. I’m # 378 on the original list, 1pc.
JasonWW wrote:
There are 2 lists. The older one on page 1 and the continuation on page 71.
Page 1, List of interests The Miller
numbers from 1 to 763
Page 71, Correct errors list The Miller
numbers from 764 to 773
Page 71, Interest list updated by pepinfaxera
numbers from 774 to the last post.
Okay, I mistakenly took “updated” list as “redone” list, that’s why I was looking for my name on the updated list.
But now I see the updated list is a “continuation” of the original, (including some corrections)
Awesome, thanks for you time and hard work!
I understand why he might feel this way. The general design and UI are established, but the specifics are still elusive. Tapered or not? Bead-blasted or “right off the lathe?” Emitters? Options? Date?
I understand why he might feel this way. The general design and UI are established, but the specifics are still elusive. Tapered or not? Bead-blasted or “right off the lathe?” Emitters? Options? Date?
Agreed. It’s already April and still no sign that this project is actually moving ahead. Are we looking at December 2018 release? June 2019?
It looks like an intriguing light, if it ever happens, so I would like to express my interest in two.
However I have my doubts about the complexity and precision (and weaknesses) needed to make the co-axial tubes purely to put an e-switch in the tail, instead of a simpler side switch in the head (my preference anyway).
Discussion of the aesthetics, taperings, raw or bead blast finish seem incidental to me. I will take it, provided it is is a marvel of packaging, performance (luminous and thermal), UI (not in doubt) etc.
Then there is the question of the manufacturer, and their willingness to perform. Presumably this would be their second special, following the GT. I’d like to think they will cope better with production and distribution this time, having learned.
Still hopeful, if this comes off it could be quite special.
Last I heard, Lumintop has a spreadsheet of things to change or fix and should now be working on a second round of prototypes. I’m not sure if this is being held back by the GT or any other projects, but I think we’ve just been waiting on Lumintop for the past month or two.
The new year most likely was the biggest reason for delays.
Is there any chance that this thread ownership would be transferred to a team account as it has been done for the GT thread? That would help keeping the first post and title up to date…
Is there any chance that this thread ownership would be transferred to a team account as it has been done for the GT thread? That would help keeping the first post and title up to date…
Is there any chance that this thread ownership would be transferred to a team account as it has been done for the GT thread? That would help keeping the first post and title up to date…
Here are TKs recent answers to my similar question
MY REVIEWS THREAD /// My Flashlight Collection ///
Mods: 1 / 2 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Review's Blog (PT) /// OL Contest 2019 /// OL Contest 2020 /// GIVEAWAYs: 1 / 2
please, add me on the interest list.
tks
Please put me in the list. I am new to this forum and I am not sure how to proceed.
BLF A6 / Astrolux A01 / Emisar D1s 5000K / Astrolux MF01 / Armytek Wizard Pro warm
Hello,
I am currently #758 for 1 flashlight. I would like to add another light to my total request; so, I am requesting to be put down for two (2) lights.
Could whoever is currently keeping track of such things (a truly thankless job!) properly adjust my light-number request? Also, let me know if a different method of making this kind of request is preferred?
Many Thanks in advance!
-Ben
miswas
-Ben Walker
miswas
pepinfaxera is currently tracking requests. They appeared suddenly from the ether when a need arose, and volunteered for a thankless tedious task. It’s kind of amazing.
… and I started writing a bot to try to do it, but I’ve been dragging my feet and it’s not ready yet.
Science of years …?
Not so many, as a child, in school we still studied ether as “what fills the space”
Fluid transmitter of … light, etc.
Sorry for my bad English
(google translator) , (https://www.deepl.com/translator)
∆ TK spends part of her time on her Home Asteroid.
I’m currently number 347, and would like a second spot reserved at the end of the current list for a total of 2 lights. Thanks!
Am I on the list for 2?
http://budgetlightforum.com/comment/1255477#comment-1255477
.
How many units do you want in total?
.
Sorry for my bad English
(google translator) , (https://www.deepl.com/translator)
I would like 2 total, sorry I didn't see my name on the list. Thanks!
Where is the new list? Is it the post linked above?
I don’t appear to be on it… that list is missing numbers between #360 and #760. I’m # 378 on the original list, 1pc.
im excited so put me down for 2 more NW
-
i hope there will be a choice of emitters or ……….
after the first run is done, do another GB with a different emitter….
after that do xhp 50 and a reflector
While I don’t know what the emitter will be, I can at least say it won’t be XHP 50. The voltage on those is too high and the driver can’t convert it. That would make this a totally different light.
There are 2 lists. The older one on page 1 and the continuation on page 71.
Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights
Click this to go to signature links. I'm still around, just not reading many new threads.
Nearly a year in and not much news on this light…
Are you following the thread? There has been plenty of news.
If you missed it, search for posts by ToyKeeper. She has given the most updates on it.
Here is a link to Fritz15 post.
http://budgetlightforum.com/comment/1261997#comment-1261997
There is more development news on TLF, the German forum where Fritz15 mostly posts.
Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights
Click this to go to signature links. I'm still around, just not reading many new threads.
Page 1, List of interests The Miller
numbers from 1 to 763
Page 71, From list of The Miller, bugs corrected.
numbers from 764 to 773
Page 71, Interest list updated by pepinfaxera,
numbers from 774 to the last post.
Sorry for my bad English
(google translator) , (https://www.deepl.com/translator)
My problem is
Difficulty to communicatión
I ignore (not speak) (not understand) English Language
.
Only Google Translator
.
It is at No. 276, 277, 372, 373, 421 and 422 on the Interest list of The Miller, page 1
You are number No. 788 and 789 on this post, updated by pepinfaxera, page 71
http://budgetlightforum.com/comment/1255477#comment-1255477.
Add 8 requests
How many flaslights do you want in total? Total 8 flaslight The FW3A? … Total 12 flaslight The FW3A? … Total 16 flaslight The FW3A? …
Please, say: Total .x. torch; … Total .x. units; … Total .x. flashlight.
Sorry for my bad English
(google translator) , (https://www.deepl.com/translator)
Okay, I mistakenly took “updated” list as “redone” list, that’s why I was looking for my name on the updated list.
But now I see the updated list is a “continuation” of the original, (including some corrections)
Awesome, thanks for you time and hard work!
.
I really like the new tapered tube a lot better.
New:
.
Old:
.
.
.
New:
.
Old:
I understand why he might feel this way. The general design and UI are established, but the specifics are still elusive. Tapered or not? Bead-blasted or “right off the lathe?” Emitters? Options? Date?
Lumintop is supposed to be making the light.
I may be wrong, but I think Lumintop may be waiting to finish the GT production before beginning to start on this light
-the- Throw calculator - Pulsars list
It looks like an intriguing light, if it ever happens, so I would like to express my interest in two.
However I have my doubts about the complexity and precision (and weaknesses) needed to make the co-axial tubes purely to put an e-switch in the tail, instead of a simpler side switch in the head (my preference anyway).
Discussion of the aesthetics, taperings, raw or bead blast finish seem incidental to me. I will take it, provided it is is a marvel of packaging, performance (luminous and thermal), UI (not in doubt) etc.
Then there is the question of the manufacturer, and their willingness to perform. Presumably this would be their second special, following the GT. I’d like to think they will cope better with production and distribution this time, having learned.
Still hopeful, if this comes off it could be quite special.
Last I heard, Lumintop has a spreadsheet of things to change or fix and should now be working on a second round of prototypes. I’m not sure if this is being held back by the GT or any other projects, but I think we’ve just been waiting on Lumintop for the past month or two.
The new year most likely was the biggest reason for delays.
Is there any chance that this thread ownership would be transferred to a team account as it has been done for the GT thread? That would help keeping the first post and title up to date…
Thanks for keeping us informed with what you know TK
It had been done a while ago…
See post #1
MY REVIEWS THREAD /// My Flashlight Collection ///
Mods: 1 / 2 // TIR: 1 / 2 // Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 /// My Review's Blog (PT) /// OL Contest 2019 /// OL Contest 2020 /// GIVEAWAYs: 1 / 2
Ditto.
Remember this is a Taschenlampen project, with major input from BLF gurus. See https://translate.google.com/translate?sl=de&tl=en&js=y&prev=_t&hl=en&ie...
for English translation.
And https://translate.googleusercontent.com/translate_c?depth=1&hl=en&ie=UTF...
Pages