ENEDED

2671 posts / 0 new
Last post
freeme
freeme's picture
Online
Last seen: 4 min 33 sec ago
Joined: 11/14/2013 - 22:00
Posts: 9390

Tiny 26650 III has slight hint of green. 

JasonWW wrote:
Does anyone have the DQG 7x xp-g2 light? It's like the mini version of the MF01 xp-g3. !{width:95%}http://freedailydeals.org/wp-content/uploads/2017/07/freedailydeals.org-...! I'm wondering if the beam color is the same. If anyone knows, post back please. Thanks
JasonWW
JasonWW's picture
Offline
Last seen: 11 hours 19 min ago
Joined: 10/22/2016 - 11:41
Posts: 12806
Location: Houston Texas

freeme wrote:

Tiny 26650 III has slight hint of green. 

JasonWW wrote:
Does anyone have the DQG 7x xp-g2 light? It’s like the mini version of the MF01 xp-g3. I’m wondering if the beam color is the same. If anyone knows, post back please. Thanks

Yes, I know. I have one. It’s a bit on the neutral side, hint of yellow, with a little bit of green. I was wondering how the xp-g3 used in this MF01 compared. If it’s the same, I won’t like it. If it’s a bit whiter, then I would.

Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights

Click this to go to signature links. I'm still around, just not reading many new threads.

adsum
adsum's picture
Offline
Last seen: 2 weeks 2 days ago
Joined: 12/13/2015 - 17:53
Posts: 223

I`m so pleased with my XPG3 that I`m also thinking about getting 219C version.
By the way how is that MF-02 Thrower deal going,any news?

freeme
freeme's picture
Online
Last seen: 4 min 33 sec ago
Joined: 11/14/2013 - 22:00
Posts: 9390

We touched on MF-01 battery carrier issue and customers' feedback, HaikeLite production, and some other upcoming group buys today. cool  Not in the hurry to roll out MF-02 yet.

adsum wrote:
By the way how is that MF-02 Thrower deal going,any news?
adsum
adsum's picture
Offline
Last seen: 2 weeks 2 days ago
Joined: 12/13/2015 - 17:53
Posts: 223

I may have missed discussions about those upcoming groupbuys and HaikeLite production.
I was under impression that MF-02 GB was set to happen next month.

freeme
freeme's picture
Online
Last seen: 4 min 33 sec ago
Joined: 11/14/2013 - 22:00
Posts: 9390

Based on Silicoon pics, i suspect MF-01 XP-G3 tint will be fairly close to S41S version. You are right, DQG is more yellow than green, i remembered wrongly.

JasonWW wrote:
 Yes, I know. I have one. It's a bit on the neutral side, hint of yellow, with a little bit of green. I was wondering how the xp-g3 used in this MF01 compared. If it's the same, I won't like it. If it's a bit whiter, then I would.
xdouang
Offline
Last seen: 1 year 3 months ago
Joined: 09/21/2017 - 14:35
Posts: 14

interested XPG3

giorgoskok
giorgoskok's picture
Offline
Last seen: 4 days 3 hours ago
Joined: 11/13/2015 - 10:46
Posts: 2671
Location: Greece

Tally-ho wrote:

Not on mine which works fine but, could a short occur here (to much solder on the resistor or if the resistor is touching the aluminum shoulder in the head) ?

It’s probably already connected , seems to be the same trace… So , it seems to be alright.

Tally-ho
Tally-ho's picture
Offline
Last seen: 55 min 46 sec ago
Joined: 07/23/2011 - 04:15
Posts: 1394
Location: France

Emisar D4 nichia // MF-01 nichia

mizou51
Offline
Last seen: 2 days 5 hours ago
Joined: 01/17/2016 - 12:06
Posts: 319
Location: France

My MF01 219C is clearly more warm than the S42 XPG3 :
I love so much the MTG2 it is really good for daily use the tint is perfect. MF01 is more warm than MT03 and others from left :

mizou51
Offline
Last seen: 2 days 5 hours ago
Joined: 01/17/2016 - 12:06
Posts: 319
Location: France

i can see a purple tint on MF01 spill….but my eye doesnt see it.
my EOS7D does

freeme
freeme's picture
Online
Last seen: 4 min 33 sec ago
Joined: 11/14/2013 - 22:00
Posts: 9390

Indicate your LED choice (XPG3 / 219C) in you reply if possible.

Edit your previous post instead of creating a new request.

---------------------------------------------------------------------

Notification List

Updated on Sep 20, 2017

 

  1. andrewmac
  2. danggitbai
  3. Kingjohn
  4. cheesecheeks
  5. Sergeantrecrut
  6. cyropro
  7. heatwaves
  8. Lou_Menn
  9. Robsva96 - XPG3
  10. Dralf
  11. Nicolicous
  12. Phantom1
  13. ramptosd
  14. laythaws
  15. BeardedRaleigh - 219C
  16. Sukoi
  17. Wieselflinkpro - XPG3
  18. gastonpatagonico -219C
  19. sammubara
  20. qandeel - 219C
  21. Ilmatic - 219C
  22. tantrik77 - 219C
  23. watamu - 219C
  24. rafalklis - 219C
  25. CJ Avlis - 219C
  26. jamaya - 219C
  27. Mr.Beam - 219C
  28. Mr.Beam - 219C
  29. maildroid - XPG3
  30. Wolpi - XPG3
  31. andrewmac XPG3
  32. southland - 219C
  33. xxx - XPG3
  34. mrheosuper - XPG3
  35. atbglenn
  36. Nicolicous - XPG3
  37. FG1 - 219C
  38. ersecu - XPG3
  39. xdouang - XPG3
  40. thommy - XPG3
  41. Itsme
  42. sammubara
  43. Lou_Menn
BeardedRaleigh
BeardedRaleigh's picture
Offline
Last seen: 1 day 13 hours ago
Joined: 08/16/2016 - 23:45
Posts: 474
Location: Chico, CA
freeme wrote:

Indicate your LED choice (XPG3 / 219C) in you reply if possible.


Edit your previous post instead of creating a new request.


——————————————————————————————————-


Notification List


Updated on Sep 20, 2017


 

  1. andrewmac
  2. danggitbai
  3. Kingjohn
  4. cheesecheeks
  5. Sergeantrecrut
  6. cyropro
  7. heatwaves
  8. Lou_Menn
  9. Robsva96 – XPG3
  10. Dralf
  11. Nicolicous
  12. Phantom1
  13. ramptosd
  14. laythaws
  15. BeardedRaleigh – 219C
  16. Sukoi
  17. Wieselflinkpro – XPG3
  18. gastonpatagonico -219C
  19. sammubara
  20. qandeel – 219C
  21. Ilmatic – 219C
  22. tantrik77 – 219C
  23. watamu – 219C
  24. rafalklis – 219C
  25. CJ Avlis – 219C
  26. jamaya – 219C
  27. Mr.Beam – 219C
  28. Mr.Beam – 219C
  29. maildroid – XPG3
  30. Wolpi – XPG3
  31. andrewmac XPG3
  32. southland – 219C
  33. xxx – XPG3
  34. mrheosuper – XPG3
  35. atbglenn
  36. Nicolicous – XPG3
  37. FG1 – 219C
  38. ersecu – XPG3
  39. xdouang – XPG3
  40. thommy – XPG3
  41. Itsme
  42. sammubara
  43. Lou_Menn

I’d like to change my selection to XPG3 please. Sorry for the inconvenience.

Slow is smooth, smooth is fast.

bigtrav261
bigtrav261's picture
Offline
Last seen: 17 hours 47 sec ago
Joined: 08/20/2017 - 15:37
Posts: 201
Location: Julian (Greensboro), North Carolina

JasonWW wrote:

Okay, your guy who’s light went turbo on one bank when power was connected. I had to look it up because I can’t remember.

Do you want to take the light apart and look around, wiggle some wires? I was thinking one of the 3 drivers had a short to ground. Just taking the driver out and poking around might fix it. If not, then it’s definetly a warranty issue. Make a video for them. It’s not a battery carrier issue.

I actually did remove the screws to the brass ring and board, just to have a look. The wires to the board seemed secure. I could not tell if the wires were damaged at the center hole, without desoldering them from the board. I have almost no experience with soldering, especially on circuit boards, so I did not attempt anything and put everything back together.

freeme wrote:

In-charge for MF-01 project has already read your ticket/ email today. You should receive a reply from him or his assistant soon.

Thank you for the update, Freeme! I’ll be looking for their response.

FreeMagenta
Offline
Last seen: 2 years 7 months ago
Joined: 10/12/2014 - 12:50
Posts: 175
Location: Poland

17track:

2017-09-12 15:22 Item is announced /bppost received the information
then it vanished as “not found”, after few days I got this:
2017-09-12 10:04 Item is announced /bppost received the information
now it vanished again…

PackageRadar:

September 18 14:03
Electronic shipment information received
Belgium Post
September 18 10:04
Electronic shipment information received
Belgium Post

hIKARInoob
hIKARInoob's picture
Offline
Last seen: 2 days 18 hours ago
Joined: 08/28/2016 - 08:15
Posts: 4185

FreeMagenta wrote:
17track:

2017-09-12 15:22 Item is announced /bppost received the information
then it vanished as “not found”, after few days I got this:
2017-09-12 10:04 Item is announced /bppost received the information
now it vanished again…

PackageRadar:

September 18 14:03
Electronic shipment information received
Belgium Post
September 18 10:04
Electronic shipment information received
Belgium Post

Same here. Looks like plane flew over Bermuda triangle…

FG1
Offline
Last seen: 3 years 6 months ago
Joined: 09/21/2017 - 07:41
Posts: 6
Location: Norway

How does this work? You make a deal with banggood and we order it?

Lexel
Lexel's picture
Offline
Last seen: 5 months 1 week ago
Joined: 11/01/2016 - 08:00
Posts: 5895
Location: Germany

Just for info that TA Narsil board used in TLF was designed from me lately

that MF01 design is on sale in the 4. batch just I wait for 3 orders, then order 3 boards, as the PCB is not cheap ordered from Oshpark

Ilmatic
Ilmatic's picture
Offline
Last seen: 4 days 5 hours ago
Joined: 04/30/2017 - 20:49
Posts: 176
Location: NJ, United States

Are most people on here taking off the plastic border on the positive end of the battery carrier?

And someone mentioned that LG HG2 flat tops work on in the carrier right?

BLF (GT, Q8, A6)
Haikelite (MT03 TA, SC01)
Astrolux (EC01, FT03, MF-01, S1, S42)
Sofirn (C8A, SP32A, SF14, SP40)
Emisar (D4, D4S)
[Convoy L6, Utorch UT02, KDLITKER C8.2, Inova T4R]

leroycp
Offline
Last seen: 1 week 4 days ago
Joined: 12/27/2015 - 19:24
Posts: 738
Location: Stewart TN

I would like one with NarsilM for an MF01. edit: misread; probably wrong thread. “driver by Lexel”

adsum
adsum's picture
Offline
Last seen: 2 weeks 2 days ago
Joined: 12/13/2015 - 17:53
Posts: 223

LG HG2 flat tops worked without removing those plastic rings but those HG2 are not absolute flat tops like my Samsung 25R which did not work. 25R worked after I removed the rings. HG2 has slightly elevated button on their flat tops and they work well in my Meteor too. My button top HG2 and button top Samsung 30Q worked also without removing the rings.

atbglenn
atbglenn's picture
Offline
Last seen: 1 year 9 months ago
Joined: 07/29/2011 - 12:04
Posts: 5767
Location: Long Island, New York

Forgot to mention I want the XPG3

Boycott Nike

Tally-ho
Tally-ho's picture
Offline
Last seen: 55 min 46 sec ago
Joined: 07/23/2011 - 04:15
Posts: 1394
Location: France

Ilmatic wrote:
Are most people on here taking off the plastic border on the positive end of the battery carrier?

I don’t know but I removed them in my batteries carrier. There is a raised ring on the outside of the plastic disc that catched the wrapper of one of my brand new sony VTC and I hated this. Slightly damaged wrapper but no big deal though.
Ilmatic
Ilmatic's picture
Offline
Last seen: 4 days 5 hours ago
Joined: 04/30/2017 - 20:49
Posts: 176
Location: NJ, United States

freeme, I am also interested in another XP-G3 that I want to gift to someone.

Thanks.

BLF (GT, Q8, A6)
Haikelite (MT03 TA, SC01)
Astrolux (EC01, FT03, MF-01, S1, S42)
Sofirn (C8A, SP32A, SF14, SP40)
Emisar (D4, D4S)
[Convoy L6, Utorch UT02, KDLITKER C8.2, Inova T4R]

Nicolicous
Nicolicous's picture
Offline
Last seen: 2 months 3 weeks ago
Joined: 04/16/2016 - 08:28
Posts: 1604
Location: Australia

I want XP-G 3 plz

Nico -.-

Ronin42
Ronin42's picture
Offline
Last seen: 1 year 5 months ago
Joined: 12/17/2014 - 22:17
Posts: 1760
Location: Alameda, CA
mizou51 wrote:
i can see a purple tint on MF01 spill….but my eye doesnt see it. my EOS7D does

Is it purple or “rose”

as long as its not green!

(“It’s good that most people can’t remember their previous lives. Otherwise
things would be a lot more complicated than they already are.”
Ajaan Lee Dhammadharo)

ramptosd
Offline
Last seen: 1 month 2 weeks ago
Joined: 03/13/2017 - 18:32
Posts: 114
Location: United States

I would like to clarify I am interested in XP-G3
Thanks!

Itsme
Offline
Last seen: 2 months 3 weeks ago
Joined: 07/18/2017 - 00:47
Posts: 562
Location: Canada

Interested in the XP-G3

silicoon
silicoon's picture
Offline
Last seen: 1 month 2 weeks ago
Joined: 04/22/2017 - 11:43
Posts: 125
Location: JAPAN

RollerBoySE wrote:
Does anyone know where I can obtain a decent holster for my MF-01?


Nitecore TM26 holster surprises well.


Nitecore TM11 holster is slightly tight.
silicoon
silicoon's picture
Offline
Last seen: 1 month 2 weeks ago
Joined: 04/22/2017 - 11:43
Posts: 125
Location: JAPAN
Tally-ho wrote:
Calmaja wrote:
Better heat dissipation

How ?
Thicker aluminum shelf, thicker MCPCB ? Both ?

It is still copper if it is this brand Wink

Pages