I already have them in my convoy C8+ (sliced dome) and skilhunt h03. I’m looking to build out a manta ray c8.2 (w/ the new noctigon 33mm quad board, custom spacer, and ledil angie optics) and a copper convoy S2+. I haven’t figured out what I’m going to do with the rest of them yet.
I have put 4 in a Q8. Very nice. I want to 12 in a multi-emitter TrustFire light. It doesn't have a name. Has 3P2S cells. Then maybe a couple AAA lights, but not sure because I mostly like this emitter at high current.
TA, any reason why you don't want to mix with another brand 5000K? I can't justify shipping with mouser unless you're planning on getting more stuff too.
If you can experiment maybe you can slice it, but AEDe has it in stock.
How does everyone compare these with Nichia 219C/B? I want to use them in moonlight ready lights so I can use their nice warm color temps. Looks like everyone is using them in multiple LED configs.
Edness, I do not know if it will help your astrolux... the 7135xFET made some weird purple tints on my light and in general they are not good for CRI due to the driver. Report back!
TA, any reason why you don’t want to mix with another brand 5000K? I can’t justify shipping with mouser unless you’re planning on getting more stuff too.
If you can experiment maybe you can slice it, but AEDe has it in stock.
How does everyone compare these with Nichia 219C/B? I want to use them in moonlight ready lights so I can use their nice warm color temps. Looks like everyone is using them in multiple LED configs.
Edness, I do not know if it will help your astrolux… the 7135xFET made some weird purple tints on my light and in general they are not good for CRI due to the driver. Report back!
That is a consideration, I have some 5000k 319A’s that could work.
Thank you for the update!
Wow…these LEDs seem to sell like hotcakes. Any future plans for another sale?
Thanks to all participants of this GB who make it possible.)
No, at this moment. Exept changing of min order from 800 to 6400, some changes in Russian
legislation lead to my supplier no longer works with individual. Maybe it is temporary decision but maybe not.
But does the forward voltage need to be similar in order to use them together?
In order to get the most out of them, yes they should be close but if you are not worried about maxing out each LED, then it is not so important as long as each LED individually can handle the full drive voltage you plan to run (aka, direct drive in this case).
Texas_Ace: How many of those residual 17pcs of 5000Ks would you like to order? Maybe I'm interested in buying some or even all of them but I need to check my demand when I get home later on.
AEDe: If possible, could you please keep the rest of those 5000Ks (depending on how many Texas_Ace wants to buy) on hold until tonight? I will get back to you as soon as I can. Thank you!
They are allready in stock.
All PM have been sent. I hope so.
I will start sending packages on Monday/
As agreed via PM yesterday, my order is now updated to:
4x LH351B 3000K CRI90
10x LH351D 5000K CRI70
Payment is sent.
Еще раз большое спасибо!
Payment Sent.
Refugee from CPF and long time lurker on BLF.
Ratus_ on r/flashlight.
1536 on the GT List, Arrived 05-23-18
1271 on the FW3A List
Payment sent
Thank you so much Andrey!
Order extended by 16x LH351D 4000K CRI90, payment sent.
I can't wait to get these! Nichia like CRI, low cost, and even domes with no tint shift.
What is everyone planning on putting them into?
Flashlights.
Already put 4 in my D4. It is now way floodier and has a beautiful tint with virtually no tint shift! Really like it that way, perfect for indoor use.
Nitecore TINI. If I manage to do so.
Astrolux S1…stock like beam but high CRI.
Sofirn c8f, triple lh351D, DD driver
it has throw, high CRI and a lot of lumen in single 18650, what can i expect more
Forgot my pen
I already have them in my convoy C8+ (sliced dome) and skilhunt h03. I’m looking to build out a manta ray c8.2 (w/ the new noctigon 33mm quad board, custom spacer, and ledil angie optics) and a copper convoy S2+. I haven’t figured out what I’m going to do with the rest of them yet.
I’ll put 4 in my D4S…
I have no self control, I’ll HAVE TO buy it…
"-X3-, is there any place in your house without a flashlight ?"
My Flashlight public album (mods, emitter swaps, eye candy)
My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)
My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)
M4DM4X blog, saves you $$$
I have put 4 in a Q8. Very nice. I want to 12 in a multi-emitter TrustFire light. It doesn't have a name. Has 3P2S cells. Then maybe a couple AAA lights, but not sure because I mostly like this emitter at high current.
I’m asking TA to help me put 3 in a C8F. That’ll make it a very practical 18650. Flood, throw, and HI CRI, with decent tint.
In my opinion they are really nice in a C8F. The reflectors give it just a little bit of hot spot so it makes a good all around light for sure.
I ordered a C8F of my own to do the same thing with as well.
Although thinking about ordering a 5000k from mouser so that I can mix the tint and get closer to the 4500k I really want.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
I didn’t see Mouser selling any of the Samsung LH351 series LEDs, do they?
Maybe it was digikey, the link was posted earlier in the thread, I have not needed to order from either one so I didn’t really look into it much.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
TA, any reason why you don't want to mix with another brand 5000K? I can't justify shipping with mouser unless you're planning on getting more stuff too.
If you can experiment maybe you can slice it, but AEDe has it in stock.
How does everyone compare these with Nichia 219C/B? I want to use them in moonlight ready lights so I can use their nice warm color temps.
Looks like everyone is using them in multiple LED configs.
Edness, I do not know if it will help your astrolux... the 7135xFET made some weird purple tints on my light and in general they are not good for CRI due to the driver. Report back!
I got my order today AEDe. Thank you and nice protected wrapping
V11R and V10R Current Mod
That is a consideration, I have some 5000k 319A’s that could work.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
But does the forward voltage need to be similar in order to use them together?
All orders marked “+” are shipped today. I will write track numbers a bit later.
351B sold out
351D 5000K 17pcs available
351D 4000K 126pcs available.
Thank you for the update!
Any future plans for another sale?
Wow…these LEDs seem to sell like hotcakes.
Thanks to all participants of this GB who make it possible.)
No, at this moment. Exept changing of min order from 800 to 6400, some changes in Russian
legislation lead to my supplier no longer works with individual. Maybe it is temporary decision but maybe not.
In order to get the most out of them, yes they should be close but if you are not worried about maxing out each LED, then it is not so important as long as each LED individually can handle the full drive voltage you plan to run (aka, direct drive in this case).
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Have you shipped my order yet? I might get a few 5000k 70cri as well just for the heck of it if not.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Texas_Ace: How many of those residual 17pcs of 5000Ks would you like to order? Maybe I'm interested in buying some or even all of them but I need to check my demand when I get home later on.
AEDe: If possible, could you please keep the rest of those 5000Ks (depending on how many Texas_Ace wants to buy) on hold until tonight? I will get back to you as soon as I can. Thank you!
Pages