So one night browsing AliExpress I found some copper direct thermal path mcpcb that fit 4 XP footprint LEDs in the center so I decided to buy some testout with some xpg 3. I have it in a manta ray C 8.2 with mountain Express fet + one driver powered byGolisi S43 IMR 26650 modified stock Optics. Here’s a link to the 20 mm boards if anyone else is interested.
MCPCB
Also I’m in the middle of a move however around the first of the month I have a couple of extra boards I wouldn’t mind sending to a couple of members who are known for their testing and reviews the list of few but not limited to DJOZZ and Texas Ace if y’all are interested
Should put out a lot of lumens especially with your golisi 26650, but the beam won’t be great because of the large gap between the dies.
Ahhh something very interesting. Thanks for the link!
What kind of optics/reflectors would fit?
Like an XHP50/XHP70 OP reflector?
If it does work, that would be awesome.
Would be interesting. Am ordering them.
They do work, I had to mod the reflector in the light I have it in but I assume that a Xhp70 reflector is needed for both since the XPE (xhp50 is 4 of these) and XPL (xhp70 is 4 of these) are both 3.5mm foot print making both the same size as the xhpup
Thank you. I just wanted to know.