Hello I just received the email to order but first I wanted to ask what the shipping method will be. I don’t want DHL! Their taxes and fees are astronomical after passing through customs. Please tell me it’s regular China Registered Mail!
regular China Registered and priority mail DHL is too expensive
ok the GT mini logo should be on the same place as on the BLF gt imo, but the logo is visible on the side here,
First of all… PLEASE go back to your post & resize your picture.
I totally agree with what you say…. the GT Mini logo should be in the same place as the original GT. BUT, if it has to be on the battery tube flat; the one in this picture looks a thousand times better than what was presented this morning.
As far as I am concerned anyway.
I wonder who comes up with this stuff??
And while we’re at it. I wish more companies (not just Lumentop) would take a tip from SOFIRN & offer a much truer neutral white tint.
The choices here are 4000K & 6500K. Basically ‘Urine Yellow’ & ‘Harsh Blue’..
True Neutral White has been left out & we are left with two crappy choices that both add a lot of color.
And glue the driver in??? Why?? . .
My opinions… yours may vary.
—
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
If the long tube can take it, I’ll probably bore it for a 20700 or 21700, depending of course if it can take either. I have a couple of XP-L HI V3 3A bare emitters and some boards, might even slice an Samsung LH351D like I did yesterday. I’ll figure it out, one way or 3 others…
(Edit: Come to think on it, I DO have another SBT-70 left over…. )
I will, at the very least, change the emitter and flash Anduril to the driver… I might end up putting an XHP-35 in it, who knows?
Does anyone have details about the driver, like the circuit design and ideally also source code? If it’s using NarsilM, there should be code for the GT-Mini version available since it’s a derivative work of a GPL-licensed project.
Code would be the most helpful thing for getting Anduril to run on it. An actual working unit with an unglued driver would help too, but probably isn’t necessary if there is reference code.
Thank You Neal!
There’s no replacement for displacement.
Order placed.
I just ordered one.
ok the GT mini logo should be on the same place as on the BLF gt imo, but the logo is visible on the side here,
...where Frugal meets with Flashlight!
つ ◕_◕ ༽つ
Whoo, that’s big! Try this.
That looks nice, btw.
Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights
Click this to go to signature links. I'm still around, just not reading many new threads.
I just ordered two NW models. Thank you Martin, Neal, and Lumintop!
I agree that the ‘GT mini’ engraving looks strange, but the Lumintop logo and bunny look great!
I also wish the driver wasn’t glued, but I’ll deal with it.
ah sorry for the big pics, but yea u get the idea now, thanks hope they will change this before they ship em out eventho its minor deal too me.
...where Frugal meets with Flashlight!
つ ◕_◕ ༽つ
I totally agree with what you say…. the GT Mini logo should be in the same place as the original GT.
BUT, if it has to be on the battery tube flat; the one in this picture looks a thousand times better than what was presented this morning.
As far as I am concerned anyway.
I wonder who comes up with this stuff??
And while we’re at it. I wish more companies (not just Lumentop) would take a tip from SOFIRN & offer a much truer neutral white tint.
The choices here are 4000K & 6500K. Basically ‘Urine Yellow’ & ‘Harsh Blue’..
True Neutral White has been left out & we are left with two crappy choices that both add a lot of color.
And glue the driver in??? Why?? .
. 
My opinions… yours may vary.
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$
Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart
Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help??? TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal
The Lumintop/Bunny logo is probably on one side, GT mini on the other.
Ordered.
Thanks Martin, thanks Neal, thanks Lumintop, thanks Samsung
M4DM4X…… In the video you did about the GT Mini, was it the 4000K or 6500K emitter??
Which ever it was is what I want to go with.
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$
Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart
Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help??? TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal
order placed
Probably already done at this point, to be honest… they’re planning on starting shipping next week so the lights are probably already made.
The rest of my above post about tint & glue remains intact.
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$
Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart
Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help??? TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$
Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart
Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help??? TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal
Ordered NW+short tube+18350 batteries
Man that sucks about the engraving on the side. That text is really awful. And now realizing the driver is glued in…
I said I was interested in 2, but I’m only ordering 1. Hopefully the NW tint isn’t too yellow.
I think I got the cw
PLEASE NOTE
i do not work in "reviews, deals and codes" for the time being
maybe M4D M4X will return one day, but until then:
THANK YOU FOR YEARS OF YOUR SUPPORT AND FRIENDLY CONTACTS!
Teacher, can you confirm where you saw these emitter tints at? I can’t seem to find them in any of the threads or reviews.
Does anyone know what emitter bin comes in it?
I ordered CW but of course I’ll change it…
I will, at the very least, change the emitter and flash Anduril to the driver… I might end up putting an XHP-35 in it, who knows?
If the long tube can take it, I’ll probably bore it for a 20700 or 21700, depending of course if it can take either. I have a couple of XP-L HI V3 3A bare emitters and some boards, might even slice an Samsung LH351D like I did yesterday. I’ll figure it out, one way or 3 others…
(Edit: Come to think on it, I DO have another SBT-70 left over….
)
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$
Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart
Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help??? TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal
placed my order for 1 NW GT-Mni
That Canadian flashlight guy & Lantern Guru -Den / DBSARlight
http://budgetlightforum.com/comment/1347077#comment-1347077
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$
Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart
Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help??? TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal
Thanks Teacher! Looks like I will try the CW emitter.
Let us know how hard it is go get the glued in driver out too..
Hopefully the bezel & battery tube will not be glued.
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$
Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart
Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help??? TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal
Martin says he thinks that is what he had in the Prototype when he made the GT Mini video.
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$
Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart
Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help??? TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal
Interested
My reviews:
ROFIS R3 Multipurpose light , ROFIS MR50
Member M4DM4X will then share details via email on how to order.
He started sending out purchase details today, and we’ve been ordering lights. Go sign up!
Does anyone have details about the driver, like the circuit design and ideally also source code? If it’s using NarsilM, there should be code for the GT-Mini version available since it’s a derivative work of a GPL-licensed project.
Code would be the most helpful thing for getting Anduril to run on it. An actual working unit with an unglued driver would help too, but probably isn’t necessary if there is reference code.
Pages