(prototype) the GT Mini

1637 posts / 0 new
Last post
Newlumen
Newlumen's picture
Offline
Last seen: 7 months 4 weeks ago
Joined: 05/27/2017 - 00:19
Posts: 2092
Location: United states

BG say they tried to shipped it out within one week… i got this info from banggood facebook.

joechina
Offline
Last seen: 2 days 3 hours ago
Joined: 03/05/2016 - 08:23
Posts: 1444
Location: Germany

M4DM4X
is this diagramm for the GTmini or ROT66?

- describes only RAMPING no MODES
- everything starts from OFF. But you have also access to everything when the lamp is ON
- can be difficult to read when printed in black and white?

- Not everything is in the diagram. I think it needs some text to explain it to a NarsilM beginner.

JasonWW
JasonWW's picture
Offline
Last seen: 4 hours 48 min ago
Joined: 10/22/2016 - 11:41
Posts: 12733
Location: Houston Texas

joechina wrote:
M4DM4X
is this diagramm for the GTmini or ROT66?

I actually thought I was in the ROT66 thread when I mentioned it earlier. I edited it out.

I’m guessing that diagram is for the GT Mini.

Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights

Click this to go to signature links. I'm still around, just not reading many new threads.

M4D M4X
M4D M4X's picture
Offline
Last seen: 25 min 52 sec ago
Joined: 03/19/2014 - 05:17
Posts: 8785
Location: Austria (GMT + 1)

not sure - I was thinking it's for the GT Mini 

 

also I belive 90% of the narsil users will find more information than needed and for playing with the new light once to set it up its ma be a good way to visualize how it works. 

 

any better way to help muggles to use the potential of narsil is highly appreciated Smile 

 all new deals are also posted here: deals.m4dm4x.com
if you do not find what you are looking for :

ask MARTIN@M4DM4X.COM - i will save you money!

JasonWW
JasonWW's picture
Offline
Last seen: 4 hours 48 min ago
Joined: 10/22/2016 - 11:41
Posts: 12733
Location: Houston Texas

M4D M4X wrote:

Any better way to help muggles to use the potential of Narsil is highly appreciated Smile

I’ve got some YouTube videos in my sig.

Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights

Click this to go to signature links. I'm still around, just not reading many new threads.

Glov
Offline
Last seen: 4 months 17 min ago
Joined: 10/08/2017 - 11:18
Posts: 54

I have just received my 2 GTminis but there is something wrong with one of them. It has no turbo mode! After a double click the output power is the same as in high, only the color temperature gets a little cooler. Also the defective one has worse centered LED in the reflector.
Both lights were ordered NW and they are the same color temperature all the way through ramping, both powered with freshly charged sanyo 18650GA

M4D M4X
M4D M4X's picture
Offline
Last seen: 25 min 52 sec ago
Joined: 03/19/2014 - 05:17
Posts: 8785
Location: Austria (GMT + 1)

please inform neal@m4dm4x.com about this 

 all new deals are also posted here: deals.m4dm4x.com
if you do not find what you are looking for :

ask MARTIN@M4DM4X.COM - i will save you money!

Glov
Offline
Last seen: 4 months 17 min ago
Joined: 10/08/2017 - 11:18
Posts: 54

M4D M4X wrote:

please inform neal@m4dm4x.com about this 


Done
KawiBoy1428
KawiBoy1428's picture
Offline
Last seen: 2 hours 51 min ago
Joined: 04/11/2014 - 18:05
Posts: 4233
Location: The Motor City

Glov wrote:
I have just received my 2 GTminis but there is something wrong with one of them. It has no turbo mode! After a double click the output power is the same as in high, only the color temperature gets a little cooler. Also the defective one has worse centered LED in the reflector.
Both lights were ordered NW and they are the same color temperature all the way through ramping, both powered with freshly charged sanyo 18650GA

A little Cooler or Bluer? Wonder if your LED is not on the star correctly?

KB1428 “Live Life WOT

azj
Offline
Last seen: 23 hours 10 min ago
Joined: 12/08/2017 - 16:46
Posts: 140
Location: Riverside, CA

ooh…Mine says “Out for Delivery” Big Smile

It’s coming to my work though, which means it goes to Receiving/mailroom first, so I may not actually get it until tomorrow Sad

severide
Offline
Last seen: 6 months 4 weeks ago
Joined: 06/01/2018 - 15:16
Posts: 117
Location: United States

My tracking updated today. It’s processing through customs and expected delivery is the 17th. It’s almost here US peeps! lol

djozz
djozz's picture
Offline
Last seen: 35 min 44 sec ago
Joined: 09/07/2012 - 17:04
Posts: 17318
Location: Amsterdam

KawiBoy1428 wrote:
Glov wrote:
I have just received my 2 GTminis but there is something wrong with one of them. It has no turbo mode! After a double click the output power is the same as in high, only the color temperature gets a little cooler. Also the defective one has worse centered LED in the reflector.
Both lights were ordered NW and they are the same color temperature all the way through ramping, both powered with freshly charged sanyo 18650GA

A little Cooler or Bluer? Wonder if your LED is not on the star correctly?

My thoughts, if instead of more light you get blue, it looks like your turbo mode is fine but your led heatsinking is wrong.
Glov
Offline
Last seen: 4 months 17 min ago
Joined: 10/08/2017 - 11:18
Posts: 54

djozz wrote:
KawiBoy1428 wrote:
Glov wrote:
I have just received my 2 GTminis but there is something wrong with one of them. It has no turbo mode! After a double click the output power is the same as in high, only the color temperature gets a little cooler. Also the defective one has worse centered LED in the reflector.
Both lights were ordered NW and they are the same color temperature all the way through ramping, both powered with freshly charged sanyo 18650GA

A little Cooler or Bluer? Wonder if your LED is not on the star correctly?

My thoughts, if instead of more light you get blue, it looks like your turbo mode is fine but your led heatsinking is wrong.

This is very possible, I just noticed some white smoke inside the ref. The beam was not exactly blue, something like the 3A tint of convoy c8
Brainsick67
Brainsick67's picture
Offline
Last seen: 3 weeks 1 day ago
Joined: 06/09/2018 - 18:53
Posts: 359
Location: United States

severide wrote:
My tracking updated today. It’s processing through customs and expected delivery is the 17th. It’s almost here US peeps! lol

Sweeet, ur lucky, hope mine says that soon.

I'm ThatCrazyFlashaholic 67

KawiBoy1428
KawiBoy1428's picture
Offline
Last seen: 2 hours 51 min ago
Joined: 04/11/2014 - 18:05
Posts: 4233
Location: The Motor City

Glov wrote:
djozz wrote:
KawiBoy1428 wrote:
Glov wrote:
I have just received my 2 GTminis but there is something wrong with one of them. It has no turbo mode! After a double click the output power is the same as in high, only the color temperature gets a little cooler. Also the defective one has worse centered LED in the reflector.
Both lights were ordered NW and they are the same color temperature all the way through ramping, both powered with freshly charged sanyo 18650GA

A little Cooler or Bluer? Wonder if your LED is not on the star correctly?

My thoughts, if instead of more light you get blue, it looks like your turbo mode is fine but your led heatsinking is wrong.

This is very possible, I just noticed some white smoke inside the ref. The beam was not exactly blue, something like the 3A tint of convoy c8

SMOKE! HULK SMASH! Big Smile

KB1428 “Live Life WOT

DB Custom
DB Custom's picture
Offline
Last seen: 1 week 19 hours ago
Joined: 01/13/2013 - 22:28
Posts: 20698
Location: Heart of Texas

If the ramp ceiling and a double click Turbo appear to be the same output, the cell choice could be the culprit. Some cells, especially protected cells, can’t deliver the higher Turbo amperage requirement.

Batch1
Offline
Last seen: 1 year 7 months ago
Joined: 12/03/2015 - 18:40
Posts: 84
Location: Canada, Québec

Thanks for this explanation, I see it in specification of flashlight but never knew exactly what it mean
Robert

edit : reference to post 218

chops728
Offline
Last seen: 2 months 1 week ago
Joined: 08/30/2014 - 16:00
Posts: 1127
Location: Swampland,La

I guess the $2 extra shipping I paid was for an extra trip around the parking lot at the Guangzhou航站 Guangdong shipping center—it seems it has been there since the 1st but finally has been accepted—-

SKV89
Offline
Last seen: 1 hour 35 min ago
Joined: 12/10/2017 - 12:46
Posts: 4170
Location: US

Just received my mini GT. At first I kept measuring about 500 lumens with every battery I had and freaked out. Then I wiped down the springs with alcohol and got 1,140 turn on lumens using the TA lumen sphere. In comparison, my D1S measures 862 turn on lumens. I don’t know why it measured so low even after I wiped the springs with alcohol. The hotspot on the D1S is smaller than the Mini GT though. The Mini GT NW tint is actually as warm and rosier than the 5D D1S so it is definitely a 5D tint. Looks great.

Sillen
Sillen's picture
Offline
Last seen: 1 hour 12 min ago
Joined: 08/01/2018 - 06:39
Posts: 466
Location: Melbourne, Australia

Thank you Neal for quick dispatch, my NW just arrived in Melbourne, Australia. No trips around the car park for this one. It’s beaten some Bang good orders placed the week before I ordered the GT mini.

Tested with 3500mAh protected battery, nice little hotspot in well lit office, included 30Q is charging for after dark.

JasonWW
JasonWW's picture
Offline
Last seen: 4 hours 48 min ago
Joined: 10/22/2016 - 11:41
Posts: 12733
Location: Houston Texas

SKV89 wrote:
Just received my mini GT. At first I kept measuring about 500 lumens with every battery I had and freaked out. Then I wiped down the springs with alcohol and got 1,140 turn on lumens using the TA lumen sphere. In comparison, my D1S measures 862 turn on lumens. I don’t know why it measured so low even after I wiped the springs with alcohol. The hotspot on the D1S is smaller than the Mini GT though. The Mini GT NW tint is actually as warm and rosier than the 5D D1S so it is definitely a 5D tint. Looks great.

Ah, yours is NW, that’s why it’s reading a little less than my CW.

Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights

Click this to go to signature links. I'm still around, just not reading many new threads.

SKV89
Offline
Last seen: 1 hour 35 min ago
Joined: 12/10/2017 - 12:46
Posts: 4170
Location: US
JasonWW wrote:
SKV89 wrote:
Just received my mini GT. At first I kept measuring about 500 lumens with every battery I had and freaked out. Then I wiped down the springs with alcohol and got 1,140 turn on lumens using the TA lumen sphere. In comparison, my D1S measures 862 turn on lumens. I don’t know why it measured so low even after I wiped the springs with alcohol. The hotspot on the D1S is smaller than the Mini GT though. The Mini GT NW tint is actually as warm and rosier than the 5D D1S so it is definitely a 5D tint. Looks great.
Ah, yours is NW, that’s why it’s reading a little less than my CW.

yea I’m guessing it is the same XP-L HI 5D v2 bin used in the Emisar D1S. Yours is probably the 1A v3 bin.

mortuus
mortuus's picture
Offline
Last seen: 3 hours 55 min ago
Joined: 12/16/2014 - 09:33
Posts: 2839
Location: Sweden

Sillen wrote:
Thank you Neal for quick dispatch, my NW just arrived in Melbourne, Australia. No trips around the car park for this one. It’s beaten some Bang good orders placed the week before I ordered the GT mini.

Tested with 3500mAh protected battery, nice little hotspot in well lit office, included 30Q is charging for after dark.

some beamshots in the australian wildnerness would be cool to see Big Smile

...where Frugal meets with Flashlight!

              つ ◕_◕ ༽つ

Sillen
Sillen's picture
Offline
Last seen: 1 hour 12 min ago
Joined: 08/01/2018 - 06:39
Posts: 466
Location: Melbourne, Australia

mortuus wrote:
Sillen wrote:
Thank you Neal for quick dispatch, my NW just arrived in Melbourne, Australia. No trips around the car park for this one. It’s beaten some Bang good orders placed the week before I ordered the GT mini. Tested with 3500mAh protected battery, nice little hotspot in well lit office, included 30Q is charging for after dark.
some beamshots in the australian wildnerness would be cool to see Big Smile
Javisst! Will have to charge up my old Canon G3 and take some snaps. Was lighting up some eucalyptus trees earlier this evening, comparing GT mini NW to ThorFire C8s which is quite cool. The NW brings out the browns and greens very nicely. Also received 4x VTC6 for Q8 to replace Imalent MRB-186P30. 750lux to 970lux with my Samsung phone ceiling bounce test

GT mini has joined ThorFire family with bastard step child cheapy UltraFire knockoff in the background
AgentWhiteBread
Offline
Last seen: 1 week 5 days ago
Joined: 04/18/2018 - 21:00
Posts: 102
Location: Kansas
chops728 wrote:
I guess the $2 extra shipping I paid was for an extra trip around the parking lot at the Guangzhou航站 Guangdong shipping center—it seems it has been there since the 1st but finally has been accepted—-

Mine still says: “Your item has been processed through a facility in GUANGZHOU EMS, CHINA at 6:33 am on August 1, 2018.”

But I’ll give it another 6 days before I start asking Martin where my package is. Deliveries from China via post office take forever sometimes.

Brainsick67
Brainsick67's picture
Offline
Last seen: 3 weeks 1 day ago
Joined: 06/09/2018 - 18:53
Posts: 359
Location: United States
AgentWhiteBread wrote:
chops728 wrote:
I guess the $2 extra shipping I paid was for an extra trip around the parking lot at the Guangzhou航站 Guangdong shipping center—it seems it has been there since the 1st but finally has been accepted—-

Mine still says: “Your item has been processed through a facility in GUANGZHOU EMS, CHINA at 6:33 am on August 1, 2018.”

But I’ll give it another 6 days before I start asking Martin where my package is. Deliveries from China via post office take forever sometimes.


Mine says that also since the 3rd..GRR

I'm ThatCrazyFlashaholic 67

Bob_McBob
Offline
Last seen: 8 hours 39 min ago
Joined: 08/14/2016 - 04:53
Posts: 570
Location: Canada

My Mini GT arrived in Canada yesterday and is in customs in Mississauga. It will hopefully be released and arrive in the next few days.

whatthewillus
Offline
Last seen: 2 months 4 weeks ago
Joined: 05/08/2018 - 15:53
Posts: 10
Location: USA

Received my order in the mail today. It’s great!

Quick question: I’m trying to set the moonlight mode to “1”. When I click to set “1” as the desired moonlight level, the light starts up brighter than the “default 3” level. When I click to set moonlight to “2,” it is noticeably dimmer than “3”. Am I doing something wrong?

Thanks for the help and putting this buy together!

M4D M4X
M4D M4X's picture
Offline
Last seen: 25 min 52 sec ago
Joined: 03/19/2014 - 05:17
Posts: 8785
Location: Austria (GMT + 1)

Neal mailed me the latest tracking numbers for the GT mini today

please mail me the email adress you used to buy to Martin@m4dm4x.com - i check if there is a tracking#

for other shipping information ask Neal@m4dm4x.com direct;)





 all new deals are also posted here: deals.m4dm4x.com
if you do not find what you are looking for :

ask MARTIN@M4DM4X.COM - i will save you money!

JasonWW
JasonWW's picture
Offline
Last seen: 4 hours 48 min ago
Joined: 10/22/2016 - 11:41
Posts: 12733
Location: Houston Texas

whatthewillus wrote:

Quick question: I’m trying to set the moonlight mode to “1”. When I click to set “1” as the desired moonlight level, the light starts up brighter than the “default 3” level. When I click to set moonlight to “2,” it is noticeably dimmer than “3”. Am I doing something wrong?

Are you in ramping mode? Are you pressing and holding from off to get to moonlight? You have to release the button as soon as the light turns on otherwise it starts ramping up. It just stays at moonlight for maybe 0.5 second.

The bottom of the ramp seems to be about moonlight 4 brightness level.

I checked moonlight levels 1-4 and all seemed to work as they should. Moonlight 1 just barely had the led glowing. I had to turn off the room light just to see if it was on or not.

Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights

Click this to go to signature links. I'm still around, just not reading many new threads.

Pages