Just received shipping notice from intl-outdoor. Yay.
How come you didn’t order from mtn?
It wasn’t available there when I ordered from Intl-Outdoor.com.
—
I want a cool white light about as much as I want Cool Ranch Soda.
"Gerecht pointed his light. Like us, he was carrying an eyeball-melting flashlight that carried for a long ways. Monster Hunters wanted all the lumens." --Larry Correia, Monster Hunter: Siege
Were you able to get the magnet tail cap from mtn? I ordered from intl-outdoor and mine shows shipped as of today. I paid $2 for tracking but haven’t been provided a tracking # yet.
Were you able to get the magnet tail cap from mtn? I ordered from intl-outdoor and mine shows shipped as of today. I paid $2 for tracking but haven’t been provided a tracking # yet.
The lights from Mountain are all shipping with magnet tail cap
Quote from description:
“Magnetic tailcap included. Non-magnetic tailcaps will be available at a later date.”
Were you able to get the magnet tail cap from mtn? I ordered from intl-outdoor and mine shows shipped as of today. I paid $2 for tracking but haven’t been provided a tracking # yet.
The lights from Mountain are all shipping with magnet tail cap
Quote from description:
“Magnetic tailcap included. Non-magnetic tailcaps will be available at a later date.”
Yea.. didn’t see it.. anyhow.. this is my first time ordering from intl-outdoor.. how long does it take to shipped to US?
My last two orders from Intl took about 2-3 weeks. The firs time I ordered from them took exactly a month. Mtn delivers faster if they have it in stock since they are in the US. Also if you buy from MTN, both Richard and Hank gets our support. With that said, I also ordered from Intl on day one because I was too excited.
It wouldn’t be the first time RMM’s customers got an Emisar product before Hank’s international customers. At least this time there shouldn’t be any need to do immediate bugfixes and a re-launch. The first D4 release was not the smoothest thing ever.
I finally got time to mod my D4S a little. I swapped in the prototype’s MCPCB so it’s now a 3A tint instead of 1A, and I tried out the flashing vias. I can confirm it works, but you may need to hold it very still during flashing or place it on a table and not touch it. I just used some solid-core wire I had laying around which was small enough to fit into the vias. I think it was 24awg or 26awg.
So now instead of ~6500K with RampingIOS V3, it’s ~5100K with Anduril. And I didn’t have to take the driver out.
I still don’t have a good 26650 cell though, so I don’t know what the peak output is. It’s difficult to measure that many lumens anyway.
I think flashing pads with a pogo pin adapter is a better solution, only viases for the alignment pogo pins
I have started to put those slowly to my new driver designs
Oshpark 2Oz are 0.8mm thin, this should be enough
on chineese fab on panel I would go to 0.6mm
Can anyone confirm whether this 26650 will be any good with this light then? It’s the only spare I have unfortunately.
Where are other Aussies getting their suitable 26650 from?
How come he should order from mtn ?
Robert
Yes, mine shipped too.
“My collection”: http://budgetlightforum.com/comment/700139#comment-700139
Same here
Same. no Battery tho
It wasn’t available there when I ordered from Intl-Outdoor.com.
I want a cool white light about as much as I want Cool Ranch Soda.
"Gerecht pointed his light. Like us, he was carrying an eyeball-melting flashlight that carried for a long ways. Monster Hunters wanted all the lumens." --Larry Correia, Monster Hunter: Siege
Intl-outdoor released on August 1st.. mtnelectronics released on August 2nd.,
I like to order ASAP.
I also saved $4 and Came with a magnetic tailcap..
Were you able to get the magnet tail cap from mtn? I ordered from intl-outdoor and mine shows shipped as of today. I paid $2 for tracking but haven’t been provided a tracking # yet.
The lights from Mountain are all shipping with magnet tail cap
Quote from description:
“Magnetic tailcap included. Non-magnetic tailcaps will be available at a later date.”
Yea.. didn’t see it.. anyhow.. this is my first time ordering from intl-outdoor.. how long does it take to shipped to US?
It’s epacket, usually 12ish days in my experience but customs can hang things up longer if they want it to.
My last two orders from Intl took about 2-3 weeks. The firs time I ordered from them took exactly a month. Mtn delivers faster if they have it in stock since they are in the US. Also if you buy from MTN, both Richard and Hank gets our support. With that said, I also ordered from Intl on day one because I was too excited.
Because he’s in the USA and it would get here faster
never fear shadows…it means a light shines nearby
But is Richard getting his allotment of D4S’s prior to intl-outdoors shipping out all of the regular orders?
I figured Richard would get his D4S’s at nearly the same time everyone else did. Maybe a day sooner since he is a VIP in the flashlight world and all
It wouldn’t be the first time RMM’s customers got an Emisar product before Hank’s international customers. At least this time there shouldn’t be any need to do immediate bugfixes and a re-launch. The first D4 release was not the smoothest thing ever.
I got a $8.90USD refund from Hank, he ran out of batteries?
Mine is shipped without refund from battery. Maybe there are problems with sending batteries to Australia
It says on his website, under shipping, that he can’t ship them to Canada and Australia and will refund them instead.
I just got a confirmation email saying my D4S has shipped from Intl-outdoors to the UK.
Same here with tracking
OK!! Mine’s on the way!
KuoH
Which cells do you use in that?
“My collection”: http://budgetlightforum.com/comment/700139#comment-700139
gonna need bigger pockets…
I think flashing pads with a pogo pin adapter is a better solution, only viases for the alignment pogo pins
I have started to put those slowly to my new driver designs
Oshpark 2Oz are 0.8mm thin, this should be enough
on chineese fab on panel I would go to 0.6mm
also made a programming adapter for my future drivers
same order in 2 Oz!
Fits those pogo pins from banggood
https://www.banggood.com/100Pcs-P50-B1-Spring-Test-Probe-Pogo-Pin-Dia-0_...
[Reviews] Miboxer C4-12, C2-4k+6k, C2, C4 / Astrolux K1, MF01, MF02, S42, K01, TI3A / BLF Q8 / Kalrus G35, XT11GT / Nitefox UT20 / Niwalker BK-FA30S / Sofirn SF36, SP35 / Imalent DM21TW / Wuben I333 / Ravemen PR1200 / CL06 lantern / Xanes headlamp
[Mods] Skilhunt H03 short / Klarus XT11GT, XT12GTS / Zebralight SC50+ / Imalent DM21TW / colorful anodisation
[Sale]
Drivers: overview of sizes and types
DD+AMC based drivers Anduril or Bistro OTSM 12-24mm, S42, 24-30mm L6, Q8, MF01(S), MT03, TN42
Anduril or Bistro 8A buck driver for 20-30mm, MF01/02/04, TN40/42, Lumintop GT, MT09R
UVC and UVC+UVA drivers
programming key
Remote switch tail DD board with FET
Aux boards:
Emisar D1, D1S, D4, D4S, D18, Lumintop FW3A, Fireflies ROT66, Astrolux MF01, Tail boards like S2+
Ordered D4S Green with Nichia.
Nichia leds will be pretty nice throwy in this flashlight, similar as XP-L Hi in D4, which is optimal for EDC light from my point of view.
@lexcel
Wouldn’t it be better to have left an right traces on the side for the pogo pins?
trace ———
————- pintrace ———
So they self center?
And how much are pogo pins with gold tips?
I now from ICT they are more reliable
toykeeper (I am sure there was a post from here)lexcelfound the pcb I remembered
https://easyeda.com/feather/ispogo-oA5nFXR93
and more
http://blog.spitzenpfeil.org/wordpress/2013/11/12/the-pogo-key-1-27mm-av...
But instaed of 3×2
xxx
xxx
I would use a keyed 4×2
xxxo
xxox
to ensure always right connection
Mine shipped on the 11th. No tracking code, yet. Grumble.
Same. Ordered mine (INT) the day it was released. Sounds like people that ordered through MTN will get there’s first.
Can anyone confirm whether this 26650 will be any good with this light then? It’s the only spare I have unfortunately.
Where are other Aussies getting their suitable 26650 from?
Pages