uh ,it’s hard to find an open land without lights here.
Most of the Chinese live in high-rise buildings, and the villas with large lawns are extravagant to us.
uh ,it’s hard to find an open land without lights here.
Most of the Chinese live in high-rise buildings, and the villas with large lawns are extravagant to us.
You could light from one of those high buildings and light to another, as long as you use fixed camera exposure settings I see no problems in doing so with the light not white out at too high exposure
Adding the distance from google maps for example
uh ,it’s hard to find an open land without lights here.
Most of the Chinese live in high-rise buildings, and the villas with large lawns are extravagant to us.
You could light from one of those high buildings and light to another, as long as you use fixed camera exposure settings I see no problems in doing so with the light not white out at too high exposure
Adding the distance from google maps for example
yes ,i understand.
and i saw many posts on forum doing review as you said.
But there is no such place in the environment around me.
It’s better that if some BLFer can help me My video is just a preliminary demonstration
Simon do you have any plane to make L2 with XHP35 ?
Unlikely, as the XHP35 is only available in a 12V configuration, which would require the use of a boost driver. The XHP50 and XHP70 are also available in 6V configurations, which is what Simon is using here. Powering a 6V emitter with two cells in series is relatively straightforward. Developing a 12V boost driver would be considerably more difficult.
Simon do you have any plane to make L2 with XHP35 ?
Unlikely, as the XHP35 is only available in a 12V configuration, which would require the use of a boost driver. The XHP50 and XHP70 are also available in 6V configurations, which is what Simon is using here. Powering a 6V emitter with two cells in series is relatively straightforward. Developing a 12V boost driver would be considerably more difficult.
Another (probably stupid) question: If I add multiple items to my shopping cart and choose "ePacket" as shipping method it looks as if I am being charged for shipping cost for each item again and again. In the end this adds up to quite a big amount of shipping cost. Is this correct this way or am I overlooking something and it can be corrected later on before I actually pay with PayPal?
Another (probably stupid) question: If I add multiple items to my shopping cart and choose “ePacket” as shipping method it looks as if I am being charged for shipping cost for each item again and again. In the end this adds up to quite a big amount of shipping cost. Is this correct this way or am I overlooking something and it can be corrected later on before I actually pay with PayPal?
the amount should be $93.29,
$93.29*85%=$79.3
if you pay for your order on aliexpress, i will adjust the amount to reduce the repeated shipping cost.
if you transfer money to me via paypal ,you can leave me your paypal account, i will send payment request
the amount should be $93.29, $93.29*85%=$79.3 if you pay for your order on aliexpress, i will adjust the amount to reduce the repeated shipping cost. if you transfer money to me via paypal ,you can leave me your paypal account, i will send payment request
you need a larger area to test in!
uh ,it’s hard to find an open land without lights here.
Most of the Chinese live in high-rise buildings, and the villas with large lawns are extravagant to us.
You could light from one of those high buildings and light to another, as long as you use fixed camera exposure settings I see no problems in doing so with the light not white out at too high exposure
Adding the distance from google maps for example
[Reviews] Miboxer C4-12, C2-4k+6k, C2, C4 / Astrolux K1, MF01, MF02, S42, K01, TI3A / BLF Q8 / Kalrus G35, XT11GT / Nitefox UT20 / Niwalker BK-FA30S / Sofirn SF36, SP35 / Imalent DM21TW / Wuben I333 / Ravemen PR1200 / CL06 lantern / Xanes headlamp
[Mods] Skilhunt H03 short / Klarus XT11GT, XT12GTS / Zebralight SC50+ / Imalent DM21TW / colorful anodisation
[Sale]
Drivers: overview of sizes and types
DD+AMC based drivers Anduril or Bistro OTSM 12-24mm, S42, 24-30mm L6, Q8, MF01(S), MT03, TN42
Anduril or Bistro 8A buck driver for 20-30mm, MF01/02/04, TN40/42, Lumintop GT, MT09R
UVC and UVC+UVA drivers
programming key
Remote switch tail DD board with FET
Aux boards:
Emisar D1, D1S, D4, D4S, D18, Lumintop FW3A, Fireflies ROT66, Astrolux MF01, Tail boards like S2+
yes ,i understand.
and i saw many posts on forum doing review as you said.
But there is no such place in the environment around me.
It’s better that if some BLFer can help me
My video is just a preliminary demonstration
Are these available to order? I may purchase one and give it a go.
Neil
Simon do you have any plane to make L2 with XHP35 ?
Simon , do you sell the XHP 50.2 NW on a 26 mm board in your store?
Simon is the owner of convoy. This light will be for sale soon.
"It wouldn’t be so bright if there wasn’t a shadow every once in a while." - Jason Mraz
Unlikely, as the XHP35 is only available in a 12V configuration, which would require the use of a boost driver. The XHP50 and XHP70 are also available in 6V configurations, which is what Simon is using here. Powering a 6V emitter with two cells in series is relatively straightforward. Developing a 12V boost driver would be considerably more difficult.
yes, i will get the XHP35 driver sample for L2 several days later
but the max output current is 1000mA,
is it too low?
i supply driver ,too
i know some BLFers already have L2 flashlight,they may DIY it themselves
i dont have 26mm DTP copper board
it seems that 25mm is regular size ,i can get some from manufacturer
i will supply XHP35 driver for L2 flashlight soon
You can give 2000mA to the XHP35 and it will good. Maybe measure heat and add a timed 5 minute stepdown on turbo.
Reviews: Olight Seeker2 pro, Lumintop GlowI, Sofirn SP36, Convoy 4X18A, Convoy M21C, Brinyte SR8 Rescue Angel, Astrolux MF01 mini, Astrolux FT03S, YLP Sherp S15, Sofirn SP40, YLP Panda 3R and Unicorn, Armytek Prime C1 Pro, Acebeam M50, Imalent MS18, Convoy M3, Nitecore TIP2, Imalent RT70, Wuben T70, Sofirn SP32A, Thorfire VG15S, Thorfire VG10S, Thorfire TG06S
Mods: Imalent MS18 dedoming, Astrolux MF01-20K, Small sun T08 MT-G2, Eagle eye X6 triple XPL, Ultrafire F13 MT-G2, Convoy C8 XHP70, Solarstorm T3 triple XP-L HI
Big flashlight measurement and beamshot collection
3D printing stuff for flashlights
My flashlight related Instagram
My Flashlight related Youtube channel called Zozzlights
Thanks, 25 mm would be good. I will message you on your AliExpress store.
Edit : I don’t see 5000k at your site. Not available?
no 5000K in stock presently ,i will order some if you need it ,my email is 468924022@qq.com
Good news but 1000mA is quite low I would like to get 2000mA .
i will get some 25mm xhp50 DTP board samples tomorrow
Simon, is there any chance to get the Convoy L6 tail cap / tail part as spare part?
It would be great to use it for high current purposes on other flashlights.
I plan to make a considerable purchase order on your webshop and this would be the icing of the cake.
Thank you.
Are you just talking about the inside switch?
Piercing The Darkness YouTube channel – https://www.youtube.com/c/PiercingTheDarkness
No, actually I'm looking for the entire tailcap unit with the outside switch.
i dont have spare tail
but if you need the tailcap and the switch ,i can send you some for free
If there is an XHP35 model coming I will definately be buying one of those. Hopefully there will be a 3500/4000K version. That would be awesome.
Thank you Simon, that would be great! I will leave a message in my AliExpress order.
I think, this set could be good for a premium XHP35 HI L2 variant:
5700K 90CRI – Pure white:
XHP35A-H0-0000-0D0UC257E or XHP35A-H0-0000-0D0UC20E2
4500K 90CRI – Neutral white:
XHP35A-H0-0000-0D0UB445E or XHP35A-H0-0000-0D0UB40E4
3500K 90CRI – Warm white:
XHP35A-H0-0000-0D0UB235E or XHP35A-H0-0000-0D0UB20E6
I think, 80 CRI emitters could be also considered, but a high CRI thrower looks brilliant.
Another (probably stupid) question: If I add multiple items to my shopping cart and choose "ePacket" as shipping method it looks as if I am being charged for shipping cost for each item again and again. In the end this adds up to quite a big amount of shipping cost. Is this correct this way or am I overlooking something and it can be corrected later on before I actually pay with PayPal?
Looking great Simon!!
Good to hear your are still bringing out some new stuff.
About the XHP35 driver, go with a minimum of at least 1500mA, 2000mA would be great if possible.
the amount should be $93.29,
$93.29*85%=$79.3
if you pay for your order on aliexpress, i will adjust the amount to reduce the repeated shipping cost.
if you transfer money to me via paypal ,you can leave me your paypal account, i will send payment request
the inner diameter of L2 for driver is too small for XHP35,
i’m ready to enlarge it to 30mm,
maybe i will use L6 host directly
Thank you Simon! That sounds terrific!
Pages