First Flashlight build!

2 posts / 0 new
Last post
Flashlight enth...
Offline
Last seen: 3 weeks 13 hours ago
Joined: 01/04/2019 - 21:09
Posts: 52
First Flashlight build!

Hey everyone,
I am completely new to the whole DIY/modding experience of flashlights, and I would like to try it out for myself! I have looked at these links as a potential build, but am not sure what to do in terms of the driver? I would really like to stick with the same host (Convoy S11) and led (xhp50.2) if possible, but am open to other led and driver combinations.

https://www.aliexpress.com/store/product/convoy-S11-host/330416_32973533...

https://www.aliexpress.com/store/product/CREE-XHP50-2-LED-with-20mm-6V-DTP-copper-plate/330416_32960723533.html?spm=2114.12010608.0.0.7cec7394VJSIhY

Thanks in advance!

Edited by: Flashlight enth... on 03/04/2019 - 21:09
Lightbringer
Lightbringer's picture
Offline
Last seen: 8 hours 52 min ago
Joined: 08/30/2016 - 14:12
Posts: 15882
Location: nyc

22mm driver? Hang on…

Yah, here ya go. http://budgetlightforum.com/node/53504

22mm boost driver, but for a 3V LED:

https://www.aliexpress.com/item/5-Mode-1Mode-Input-3V-15V-dc-22mm-LED-Driver-For-Cree-10W-T6-XML-T6/32746300708.html

There are similar ones that’d be similar, just check the output voltages. But AX is a good place to start, Fasttech also.

You can pick 1-mode, multimodes, etc. Just goggle around, post here any contenders you find.

09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0