Has it got reverse battery protection now ?

I’m going broke before the end of the year…

Klayking wrote:

I seemed to notice that my FW3A goes for longer at the maximum regulated ~800lm level than my D4 at the same sort of brightness. Is this most likely because I just keep overshooting and ending up with 1000lm+?

Anduril will surely make it a lot easier to know how much output we’re getting. So glad it’s now included on Emisar’s newer flashlights.

I compared both my D4 and FW3A at step 130 which is full regulation for the FW3A. My D4 stepped down 2 minutes later than the FW3A with the same thermal config. (the FW3A has a slightly newer Anduril build though)

I guess more thermal mass and running the emitters in a more efficient zone has something to do with it. D4 is SST20, FW3A is XP-L HI, so I expected the FW3A to actually go longer if not near exactly the same.

I really need to crack open my D1 and flash it. RampingOS isnt bad, but I would like most of my lights to be consistent.

Klayking wrote:

I have found Anduril to operate just like Ramping IOS V2 if you only use the relevant button presses.

That’s not entirely true, there are significant differences.

Ryzbor wrote:

Klayking wrote:

I have found Anduril to operate just like Ramping IOS V2 if you only use the relevant button presses.

That’s not entirely true, there are significant differences.

I appreciate both, but I think I also prefer ramping iOS.
It just feels snappier and simpel.

Hank Wang wrote:

For sale, ship before the end of this month.

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

Where can I choose aux LED color? Would also want a 21700 tube.

Hank Wang wrote:

RapidLux wrote:

Hank Wang wrote:

For sale, ship before the end of this month.

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

Where can I choose aux LED color? Would also want a 21700 tube.

Red, yellow, green, cyan, blue,magenta, rainbow aux LED options is selectable through config UI, as well as the voltage indication function. (6 fast clicks and hold the 7th to choose the aux LED options, 7 fast clicks to choose the aux LED modes)

Any chance you could show us what the PCB with the aux LEDs looks like?

$45 base model. That’s a good price.
D4 is bound to be among the top recommendations around here for another year.

The led is nothing special, not much bigger than a single-colour aux led. But you have to adress the three colours separately to do the colour mixing and get those different colours, so the aux board and MCU must support that (occupies more pins).
Leds must be something like this:

Hank Wang wrote:

For sale, ship before the end of this month.

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

Order placed as fast as my clicks would allow me!

2 x D4v2 coming my way!!

Thank you Hank! Lookinf forward to the 21700 surprise (hopefully a 7 LED competitor to the E07 wink wink)

Hank Wang wrote:

For sale, ship before the end of this month.

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

Hank, is it possible to order the D4 V2 with the XP-L HI V4 3C, please?

https://intl-outdoor.com/cree-xpl-high-intensity-v4-3c-bare-led-p-900.html

I just learned 3C is above the BBL. But I'm not sure how "greenish" the tint would be.

I would really appreciate the option to order V4 3C bin instead of the V2 3A bin.

Is it possible to get the Carclo 10621 instead of 10622 or do you only offer 10622 and 10623?

Thank you very much!

Hank Wang wrote:

For sale, ship before the end of this month.

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

Thats surprisingly well priced and I like the new details like the lanyard hole and knurling. $3 for a stainless bezel is really nice too.

Im content with what I have for now, but this is definitely a good update!

EDIT: I see the UI diagram has muggle mode on it, do these lights actually have muggle mode or no?

nick779 wrote:

EDIT: I see the UI diagram has muggle mode on it, do these lights actually have muggle mode or no?

No it is replaced with changing the secondary LEDs options (6 fast clicks and hold the 7th to choose the aux LED options, 7 fast clicks to choose the aux LED modes)
Need a new diagram.

EDIT : No, I’m not sure about this. That’s why we need a new diagram.

Omega_17 wrote:

nick779 wrote:

EDIT: I see the UI diagram has muggle mode on it, do these lights actually have muggle mode or no?

No it is replaced with changing the secondary LEDs options (6 fast clicks and hold the 7th to choose the aux LED options, 7 fast clicks to choose the aux LED modes)
Need a new diagram.

Are you sure? The D4S with Anduril was configured by clicking in lockout mode .

Is there a pocket clip included?
I don’t see an option to add one on the product page.

One impulse buy on your way Hank.

Ratus wrote:

That looks awfully small for a multi led SMD.
I think the ad you posted is for 25 LED each of 5 different colors, not for a multi LED SMD.

Why no white AUX-lights?

Hank Wang wrote:

For sale, ship before the end of this month.

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

I bought one with all the accessories immediately. No regrets.

I missed the pocket clip option but wish to add it to the order if possible?

It looks sweet

If I were to order, it would be $60 for all the extras I want

I think I'm going to wait and see if better colors come out, though. 

Hank, it's nice to see you continue to innovate. I like what you're doing.

It looks like the switch is more recessed than on the D4v1. I await your reviews!

What is the difference between SST20 and XPL-HI?

And also between the 10622 and 10623 Carclo optics?

Thank you.

Awesome! I want to buy it!
Will a warm white be available?

Will there be an Aux LED rainbow option? multi colored?

Silent_Star wrote:

Awesome! I want to buy it!
Will a warm white be available?

Will the 18350 tube from a D4v1 fit on the D4v2?