Can someone chime in. Do kr1/kr4 clips fit the D4v2? I know a metal spacer is needed to maintain electrical contact but does it fit the tube and is it retained by the tailcap?
Can someone chime in. Do kr1/kr4 clips fit the D4v2? I know a metal spacer is needed to maintain electrical contact but does it fit the tube and is it retained by the tailcap?
Can someone chime in. Do kr1/kr4 clips fit the D4v2? I know a metal spacer is needed to maintain electrical contact but does it fit the tube and is it retained by the tailcap?
Can someone chime in. Do kr1/kr4 clips fit the D4v2? I know a metal spacer is needed to maintain electrical contact but does it fit the tube and is it retained by the tailcap?
However the clips are as different as possible, one follows the curvature of the body the other one opposes. Since D4v2 is straight not sure if that clip would even be suitable as clip for it, considering the hard curve, I would not take the first clip design as an example of how the deep carry high curve new KR4 clip would fit on a D4v2.
Will the new clip design be the default clip now supplied with the KR4? (I prefer the old one)
Yes, the new clip is default supplied with KR4, if you prefer the old clip, just send us an email.
The KR1 is still with the old clip by default, you can also send us an email if you have any special request.
Would the clip work with the D4v2? I know you would need a wire or something to maintain contact in the tail, but can it fit on a D4v2?
I doubt it. I think the tailcap is wider on the KR4 than the D4v2.
However, if you really want a slim clip for your D4v2, just use an FW3A clip. That’s what I do. FW3A clips can be made to fit all D4 and D4v2 models with a small amount of effort.
Wow this looks awesome! I can’t decide whether to get the default or the “floody optics”. What are the advantages of floody? Does it depend on how you plan to use the light?
Would the clip work with the D4v2? I know you would need a wire or something to maintain contact in the tail, but can it fit on a D4v2?
I doubt it. I think the tailcap is wider on the KR4 than the D4v2.
However, if you really want a slim clip for your D4v2, just use an FW3A clip. That’s what I do. FW3A clips can be made to fit all D4 and D4v2 models with a small amount of effort.
Could you share how you did this? I have a couple extra deep carry fw3a clips.. thank you. I’m assuming you cut the ring that wraps the light? I tried putting the fw3a clip on my kr4 before and doesn’t fit at all
Wow this looks awesome! I can’t decide whether to get the default or the “floody optics”. What are the advantages of floody? Does it depend on how you plan to use the light?
Default optics are slightly floody already. They are a good balance between throw and flood, and the beam looks similar to D4V2.
Wow this looks awesome! I can’t decide whether to get the default or the “floody optics”. What are the advantages of floody? Does it depend on how you plan to use the light?
Default optics are slightly floody already. They are a good balance between throw and flood, and the beam looks similar to D4V2.
I recommend the default optics.
Thank you!
How cool would it be to have a D18 in 2000K? I’m totally addicted to my KR4 2000K
Ha I’m jealous… I just need to figure out which D18 to get first. My only non-6500K lights are the KR4 2000K and a little copper RoxyVon A9 that’s 5000K I think
Hank, will you ever sell the k1 with the battery included? just to save me some trouble of looking for a 21700? i dont even know whats good, and i also dont have any other 21700 lights, so i would just be buying 1 or 2 pc, which is an awkward amount considering shipping is most likely gonna be more expensive.
Hank, will you ever sell the k1 with the battery included? just to save me some trouble of looking for a 21700? i dont even know whats good, and i also dont have any other 21700 lights, so i would just be buying 1 or 2 pc, which is an awkward amount considering shipping is most likely gonna be more expensive.
If you are from Canada, then we can put one battery in the tube, just send us an email please.
Hank, will you ever sell the k1 with the battery included? just to save me some trouble of looking for a 21700? i dont even know whats good, and i also dont have any other 21700 lights, so i would just be buying 1 or 2 pc, which is an awkward amount considering shipping is most likely gonna be more expensive.
If you are from Canada, then we can put one battery in the tube, just send us an email please.
wow i did not expect such a prompt reply, thank you! will do!
just curious though, is this special treatment only for canada? can this be done for other countries?
niajef, that’s a complicated question with a complex answer. Many emails from countries are blocked by China, many export and import laws prohibit the cell regardless of whether it’s in a device or not. It’s complicated, an individual needs to reach out like you did and find a specific answer to their issue. Some will be pleased, some will not. It is what it is.
I would also like to buy a high-powered Emisar headlamp, something like the D4 headlamp version
Can someone chime in. Do kr1/kr4 clips fit the D4v2? I know a metal spacer is needed to maintain electrical contact but does it fit the tube and is it retained by the tailcap?
Have a read of this.
- the best way to predict the future is to create it -
Sweet. Many thanks!
However the clips are as different as possible, one follows the curvature of the body the other one opposes. Since D4v2 is straight not sure if that clip would even be suitable as clip for it, considering the hard curve, I would not take the first clip design as an example of how the deep carry high curve new KR4 clip would fit on a D4v2.
Yes, the new clip is default supplied with KR4, if you prefer the old clip, just send us an email.
The KR1 is still with the old clip by default, you can also send us an email if you have any special request.
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
D18 is with SST-20 Deep Red 660nm LED.
https://intl-outdoor.com/emisar-d18-151.html
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
SO Awesome and exciting.
Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180
I doubt it. I think the tailcap is wider on the KR4 than the D4v2.
However, if you really want a slim clip for your D4v2, just use an FW3A clip. That’s what I do. FW3A clips can be made to fit all D4 and D4v2 models with a small amount of effort.
Hello Hank,
Can you make SST-20 Deep Red available also for Emisar D4SV2 as well?
Wow this looks awesome! I can’t decide whether to get the default or the “floody optics”. What are the advantages of floody? Does it depend on how you plan to use the light?
That would be awesome! And more affordable too
Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180
Oh crap…
It’s AVAILABLE! D4sv2 w/ sst20 red!
Thanks Hank!!
Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180
Could you share how you did this? I have a couple extra deep carry fw3a clips.. thank you. I’m assuming you cut the ring that wraps the light? I tried putting the fw3a clip on my kr4 before and doesn’t fit at all
Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180
Wow, I did not notice, that it was already available. It is instant buy for me. Sorry for my wallet this autumn
I recommend the default optics.
Thank you!
How cool would it be to have a D18 in 2000K? I’m totally addicted to my KR4 2000K
Me too, that would be cool. To use E21A D18 would need a new E21A-compatible driver.
A warmer D18 with great tint could be built today without a new driver with sliced LH351D 2700K emitters.
CCT = 2369K (Duv -0.0014) (Ra) = 95.9 [ R9 = 72.9 ]
https://budgetlightforum.com/comment/1688207#comment-1688207
I already have 4 D18s. I need a new color option I think.
How about a green body, red emitters. Christmas colors. I’d buy one immediately, and green is available for other lights.
Ha I’m jealous… I just need to figure out which D18 to get first. My only non-6500K lights are the KR4 2000K and a little copper RoxyVon A9 that’s 5000K I think
Hank, will you ever sell the k1 with the battery included? just to save me some trouble of looking for a 21700? i dont even know whats good, and i also dont have any other 21700 lights, so i would just be buying 1 or 2 pc, which is an awkward amount considering shipping is most likely gonna be more expensive.
https://intl-outdoor.com, Noctigon, Emisar, flashlight components.
wow i did not expect such a prompt reply, thank you! will do!
just curious though, is this special treatment only for canada? can this be done for other countries?
Now thats NICE deep carry low profile pocket clip gonna pick me up a few.
niajef, that’s a complicated question with a complex answer. Many emails from countries are blocked by China, many export and import laws prohibit the cell regardless of whether it’s in a device or not. It’s complicated, an individual needs to reach out like you did and find a specific answer to their issue. Some will be pleased, some will not. It is what it is.
i see…so it is a special treatment, but others countries can also get it, just not all countries
Oh no. The K1 disappeared. Did I miss this?
Well i did, i still didn’t buy one, was especially leaning towards a green K1
Edit, it’s back!
Edit 2, but you can’t order it
someone said its stock issue. but hank literally just told me the other day to email him if i wanted to buy one with battery in it. so im so confused…
Pages