Sky Lumen Nguyen Flashlight

Hello All,

I am not sure if this is the right place to share my Sky Lumen Nguyen Flashlight Project. If its not let me know and I will move it. My team and I have been working on this project for about 1 year now. There were delays here and there but I think we are finally almost there and I am very excited to share it with all. I am not trying to sell anything in this thread. However if you are interested in the project you may email me at SkyLumen54@gmail.com for more info. I also understand there are tension between CPF and BLF but I do hope that reside elsewhere but not between flashlights enthusiasts worldwide. I am just here to share a common passion with all. Cheers!

View post on imgur.com

View post on imgur.com

View post on imgur.com

View post on imgur.com

View post on imgur.com

Proto V3 Testing Sample Specs & Background:

Unpotted light engine - Let’s see if driver can take the hits
Proto V3 is made of 6065 Aluminum not 7075 Aluminum: Not as tough as 7075 but a bit better heat sinking.
First run of 30 lights will be 7075. 2nd run of 30 will likely be 2011.
Testing light engine will be a Quad White 2 + DriverVN4 + FS54 + Copper Retainer. Set to a simple 2 level for function check.
Dual Orings on both ends of the body installed
Triple Orings on body installed
heavy Duty 2.25mm thick Blue boot installed
NO-OX-ID electrical conductive lube over all Orings except for the 3 on body
Dual side Antireflective 3mm tempered glass
Optional suspension flat oring behind glass installed
Standard matte Ti pocket clip. Screws and clip glued in place.
HA III finished. Production body parts will be sandblasted before HA III over for uniform look & gold alodyned over threads to prevent corrosion.
Clicky tail cap + standard head installed
Manker 21700 5000mAh Protected
Loaded weight 11.5oz
135.mmm Long
Head & Body 33.4mm thick
Tail cap with clip 39.3mm thick

Sky Lumen Nguyen Packaging

Test 1: Bucket Water Dunk

Test 2: High Water Pressure

Test 3: Corvette Driver Over

Test 4: Before Test Recap

Test 4: F150 Driver Over

Test 5: Heat Test

Test 6: Freeze Test

Test 7: Impact Test

Test 8: Final Operation & Seal Test

Test 9: How to Kill SL Nguyen?

Any way you can just share the info about the light here?

I sure can. I will update post 1.

Following.

I’d be more worried about my Vette than the Light—————————— :person_facepalming:

I would like to know more about the emitter options. Saw at CPF that there will be a 14 emitter option. Is that going to be E21A or 3535 emitters? Also please keep an eye out for BlueSword’s dream bin LH351D emitter. I would like those very special emitters to make this light even more special.

… that packaging is genius!

when will the remaining tests be up on Youtube?

Linear CC, PWM’ed FET or other type of driver?

Emitter options?

Driver LVP and reverse polarity protection? Protected cell seems an odd choice for a quad hotrod (at least I assume its a bit of a hotrod since you made it :smiley: )

Can we start with the copper version right off the bat? Fine, I’ll take two. The clip actually is such a nice minimalist design, gives it a post-modern look. Designer is an artist

XP size footprint for the 14 LED option :wink:

It will be a while until I can do runs with exotic metals as collectible but it would be cool to make a few.

:heart_eyes: How does it fit though? That will be mule for sure right.

That’s the fun part :wink:

View post on imgur.com

View post on imgur.com

View post on imgur.com

View post on imgur.com

View post on imgur.com

View post on imgur.com

View post on imgur.com

14 LEDs??!! It’s 100% Mule and I am in if you show us some pictures

What made you decide to go with tube walls over half a centimeter thick?

This light engine is in design phase. Was going to do 16. But actually might reduce to 12 to improve trace width.

View post on imgur.com

Its only 5.77mm at its thickest with out threading

No. I mean 14 (or 12) installed in the light. Light engine option wise there can be like +50

I got this budget Infared Thermometer on Amazon for number 5 heat test. Seems off. For example my wall seem colder than 72F and, my skin less warm than 88F, a metal surface I heated up that is burning to the hand was only 200F, icecream in the freezer at a low 17F. I guess worst case we will just use it as a guidance on temp changes rather than accuracy. I am sure someone here got one right? Are these numbers way off?

View post on imgur.com

View post on imgur.com

View post on imgur.com