[New] Lumintop Tool AA 2.0 Ti

171 posts / 0 new
Last post
Yokiamy
Yokiamy's picture
Offline
Last seen: 1 hour 47 min ago
Joined: 10/18/2016 - 15:47
Posts: 3199
Location: Netherlands

That works, but it is still difficult to see, the material below the lumintop engraving might be real copper

djozz
djozz's picture
Online
Last seen: 7 min 40 sec ago
Joined: 09/07/2012 - 17:04
Posts: 18252
Location: Amsterdam

It works for me.

Looks like copper indeed, which is a pity because I like brass better for this purpose (structurally stronger, while still having good heat conductance). I ordered one (from Fasttech, they are cheap, and you can use code BLF for a bit less even) but not sure I would have done that if I knew it was copper.

Yokiamy
Yokiamy's picture
Offline
Last seen: 1 hour 47 min ago
Joined: 10/18/2016 - 15:47
Posts: 3199
Location: Netherlands

Well, it’s not that you did not know, since they kept advertising with copper head Cool

djozz
djozz's picture
Online
Last seen: 7 min 40 sec ago
Joined: 09/07/2012 - 17:04
Posts: 18252
Location: Amsterdam

Yokiamy wrote:
Well, it’s not that you did not know, since they kept advertising with copper head Cool
Angry Wink
Henk4U2
Henk4U2's picture
Online
Last seen: 9 min 56 sec ago
Joined: 02/13/2014 - 17:52
Posts: 4302
Location: The heart of the Netherlands (GMT+1)

PBP wrote:
https://photos.app.goo.gl/gaPrgBHjHfMaGuva7

does that work?

Works for me (L.J.Gibbs).

You are a flashaholic if you are forced to come out of the closet, to make room for more flashlights.

Geuzzz
Geuzzz's picture
Offline
Last seen: 16 min 59 sec ago
Joined: 10/25/2015 - 10:27
Posts: 1509
Location: EU

PBP wrote:
https://photos.app.goo.gl/gaPrgBHjHfMaGuva7

does that work?


Looks like copper indeed, strange. Is the coating silver? Looked like brass in earlier pictures.

PBP
Offline
Last seen: 4 months 2 weeks ago
Joined: 06/02/2020 - 18:47
Posts: 19
Location: Lincolnshire, U.K

The sun was quite bright and I had used a bit of metal polish to make the copper come out more which I think has lightened the “brass”.

Geuzzz
Geuzzz's picture
Offline
Last seen: 16 min 59 sec ago
Joined: 10/25/2015 - 10:27
Posts: 1509
Location: EU
PBP wrote:
The sun was quite bright and I had used a bit of metal polish to make the copper come out more which I think has lightened the “brass”.

Ah I see. Thanks for clearing this all up btw.

PBP
Offline
Last seen: 4 months 2 weeks ago
Joined: 06/02/2020 - 18:47
Posts: 19
Location: Lincolnshire, U.K

Glad I could make a contribution to the community.

healymattos
healymattos's picture
Offline
Last seen: 1 year 11 months ago
Joined: 06/24/2020 - 06:13
Posts: 1
Location: Hayward, CA

What is the price?

PBP
Offline
Last seen: 4 months 2 weeks ago
Joined: 06/02/2020 - 18:47
Posts: 19
Location: Lincolnshire, U.K

I paid 46 doll hairs posted to the uk. Your mileage may vary.

jon_slider
jon_slider's picture
Offline
Last seen: 10 hours 4 min ago
Joined: 09/08/2015 - 12:20
Posts: 5834
Location: Central North America
PBP wrote:

the above photo looks like nickel plated brass

different than the advertised info:

gold plated:

.

(yellow) “copper” (aka brass, aka “messing”):

Im not sure which version(s) are actually shipping..
maybe more people will post photos of the actual light they receive.

Want to Buy Jetbeam TCR-1

d_t_a
Offline
Last seen: 6 hours 32 min ago
Joined: 08/04/2017 - 23:58
Posts: 2700
Location: Manila, Philippines

Do all Tool AA Ti use XP-L2 LED (I understand specs indicate XPL-HD, but actual based on some reports appear to be XP-L2) , or are there variants with XPL-HD or Nichia 219C?

gchart
gchart's picture
Online
Last seen: 2 min 25 sec ago
Joined: 03/19/2016 - 11:57
Posts: 3236
Location: Central IL

I’ve bought some with Nichia before. Not sure if they’re still available anywhere.

Edit: I was being absent minded. I was thinking of the aluminum Tool AA, not the Ti version.

Yokiamy
Yokiamy's picture
Offline
Last seen: 1 hour 47 min ago
Joined: 10/18/2016 - 15:47
Posts: 3199
Location: Netherlands
d_t_a wrote:
Do all Tool AA Ti use XP-L2 LED (I understand specs indicate XPL-HD, but actual based on some reports appear to be XP-L2) , or are there variants with XPL-HD or Nichia 219C?

They have a 219C version as well.

Another interesting thing is that Lumintop assured me it is real-RED copper (just as the complete new copper Tool) with a gold colored paint coating on it to match the color of the clip.

jon_slider
jon_slider's picture
Offline
Last seen: 10 hours 4 min ago
Joined: 09/08/2015 - 12:20
Posts: 5834
Location: Central North America

Red Copper Tool AA 2.0
64 grams empty.
pic link to more info

Want to Buy Jetbeam TCR-1

Firelight2
Firelight2's picture
Offline
Last seen: 10 hours 5 min ago
Joined: 04/08/2011 - 15:17
Posts: 4906
Location: California

Got a Tool Ti AA 2.0 recently.

I quite like it.

  • Simple 4-mode light
  • Head is gold-plated brass and looks great.
  • Lighted switch
  • Smooth reflector for good throw.
  • Bezel is not glued so not too hard to do an emitter swap. It was stiff to unscrew the first time, but there was no glue. I replaced the cool white emitter with a neutral-white 4000K XPL HI.
  • The knurling is quite rough. It feels great in the hand. Very grippy. It also shouldn’t tear up your clothes if you use the clip since the clip does not rest directly on the knurling.
  • The knurling is rough enough to make a very effective nail file. Very convenient if you’re traveling and can’t have a pocket knife nail file on you.

Verodin
Offline
Last seen: 5 hours 22 min ago
Joined: 01/11/2022 - 16:50
Posts: 490

Hope it’s not a problem digging up a relatively old thread, but I needed to vent a moment. And possibly prevent others from being disappointed after doing business with Lumintop.

Just discovered mine has a Nichia 219c as well. I bought it from the official AE store as XPL HD neutral white over a year ago. The different emitter on top of that stupid bunny logo that was not in their advertising photos (they also ruined an otherwise beautiful copper FW3C this way).

This was before I was active on BLF and started recognising specific emitters, tints, etc. Feeling a bit stupid I didn’t look it up better back then.

d_t_a
Offline
Last seen: 6 hours 32 min ago
Joined: 08/04/2017 - 23:58
Posts: 2700
Location: Manila, Philippines

Verodin wrote:
Hope it’s not a problem digging up a relatively old thread, but I needed to vent a moment. And possibly prevent others from being disappointed after doing business with Lumintop.

Just discovered mine has a Nichia 219c as well. I bought it from the official AE store as XPL HD neutral white over a year ago. The different emitter on top of that stupid bunny logo that was not in their advertising photos (they also ruined an otherwise beautiful copper FW3C this way).

This was before I was active on BLF and started recognising specific emitters, tints, etc. Feeling a bit stupid I didn’t look it up better back then.

I notice that the Tool AA 2.0 now uses XP-L2 instead of XPL-HD, although there doesn’t seem to be mention of “XP-L2” in any of the Tool AA 2.0 description links that I can find.

Nichia 219C version of Tool AA 2.0 seems to be more of a limited batch, since they seem to be quite rare (not often available)…

Verodin
Offline
Last seen: 5 hours 22 min ago
Joined: 01/11/2022 - 16:50
Posts: 490

Oh I do like the 219c, nothing wrong with that. What pisses me off is that the product you receive does not correspond to the description and/or photo. Not once, but twice (same order though). Then I’m gone as a customer. I mean what’s the main feature of a flashlight? The emitter producing the light. It has to match! Photos are also important to be accurate when it comes to the ‘special’ metals since they are often bought specifically for their distinct looks. And significantly higher priced.

Btw, didn’t know that it was a bit rare. I feel a bit better about it now, thanks Beer

Pages