2 bay analyzing chargers

I’m looking for a reliable 2 bay analyzing charger, but there aren’t too many options out there. Based on HJK’s reviews and chart, I was looking at the miboxer c2-4000 and Allmaybe TC2, with the Miboxer edging the TC2 out due to the lower charging current option (.5 vs .25).

Basically, I wanted a relatively compact analyzing charger that could provide a low charging current for small cells. But, it seems like the miboxer c2-4000 was either discontinued, replaced, or just forgotten.

Are there other 2 bay analyzing chargers out there I should be looking at?

I’m waiting and hoping miboxer upgrades the charger as HKJ suggests could be done:
https://lygte-info.dk/review/Review%20Charger%20Miboxer%20C2-4000%20UK.html

Because I’ve reached the point where I have a big box of chargers and am tired of buying “almost good enough” devices.
It happens with age, I guess.

I sent a message to Miboxer, but I’m not exactly expecting much of a response. :frowning:

Maybe I’ll post in the Wanted section…just in case.

See response in your WTB post

You might want to look again at the ISDT-C4. The biggest shortcoming is a lack of sliders which greatly restricts what the C4. On the other hand, it doesn’t have the problems that sliders can cause.

Firmware updates fixed many of the issues HJK’s reported in his review.

HJK tested with version 1.0.0.8 and made a few additional checks with 1.0.011. Current firmware is 1.1.0.16.

Cut and past the release notes:

Release Notes
————————————————
C4 V1.1.0.16

  1. Full charge voltage is adjusted to 1.55V for NiMH。
    C4 V1.1.0.12
  2. 改进NiMH电池充电功能。
    C4 V1.1.0.10
  3. 改进锂电池充电功能。
  4. Improve lithium battery charging.
    C4 V1.1.0.9
  5. 改进NiZn电池充电算法。
  6. Improved NiZn battery charging algorithm.
    C4 V1.1.0.6
  7. 增加详细信息显示。
  8. 在分析和循环模式下增加充电电流和放电电流设置。
  9. Add detailed information display.
  10. Add charge current and discharge current setting in analysis and cycle mode.
    C4 V1.0.0.15
  11. 修复分析结束风扇未停止工作BUG。
  12. USB大功率输出时启动风扇。
  13. Fix the bug of Fan does not stop working when Analysis Done.
  14. Start the fan when USB high power output.
    C4 V1.0.0.14
  15. 放电容量计算BUG修正。
  16. 修改放电温度检测异常处理方式。
  17. Fix the bug of Discharge capacity calculation.
  18. Modify the discharge temperature detection exception handling.
    C4 V1.0.0.11
  19. 分析功能优化
  20. NiMH充电优化
  21. Analysis function optimization
  22. NiMH charge optimization

C4 V1.0.0.7
磷酸铁锂自动判断算法改进
开机音修改

C4 V1.0.0.3
1:优化充放电算法
2:修改风扇控制算法
3:待机界面修改

1:Optimize charge and discharge algorithm
2:Modify the fan control algorithm