✌ FREEME - ASTROLUX FT03 Mini XHP50.2 (4200lm) / SST40 Anduril AUX LEDs USB-C 18650 Flashlight - ALIVE

299 posts / 0 new
Last post

Pages

Angel Martínez
Offline
Last seen: 3 hours 5 min ago
Joined: 11/19/2010 - 14:43
Posts: 180

Ordered a red one.

freeme
freeme's picture
Offline
Last seen: 1 hour 15 min ago
Joined: 11/14/2013 - 22:00
Posts: 9393

Thank you.

Angel Martínez wrote:
Ordered a red one.
Tom E
Tom E's picture
Offline
Last seen: 30 min 45 sec ago
Joined: 08/19/2012 - 08:23
Posts: 14056
Location: LI NY

Got my greenie. Guess I didn't read the fine print - didn't realize it's a UI all their own, not Anduril, no AUX LED's around the LED.

I measured 4.2 tail amps on a 35E at 4.06V, but on a VTC5D, measured 5.2 tail amps. So, what does this tell us? Is it a FET with limited amps or just poor regulation?

Don't think it's a problem for the green - think it can take higher amps than the white or red?

d_t_a
Offline
Last seen: 10 hours 23 min ago
Joined: 08/04/2017 - 23:58
Posts: 2313
Location: Manila, Philippines
Tom E wrote:

Got my greenie. Guess I didn’t read the fine print – didn’t realize it’s a UI all their own, not Anduril, no AUX LED’s around the LED.


I measured 4.2 tail amps on a 35E at 4.06V, but on a VTC5D, measured 5.2 tail amps. So, what does this tell us? Is it a FET with limited amps or just poor regulation?


Don’t think it’s a problem for the green – think it can take higher amps than the white or red?

Would also like to know if the green does take higher amps than the white and red (as mentioned in another thread, the red didn’t seem to have visible brightness difference when on High or on Turbo mode), whereas the white one will turn a bit bluish on Turbo. The green looks a wee bit brighter from High going to Turbo, again as per the sample I got of the FT03-Mini Osram (white/green/red)

gregor
gregor's picture
Offline
Last seen: 22 hours 16 min ago
Joined: 01/09/2015 - 16:35
Posts: 645
Location: Slovenia
casi29061965
Offline
Last seen: 19 hours 46 min ago
Joined: 06/27/2016 - 09:50
Posts: 659
Location: Germany

Interested !

freeme
freeme's picture
Offline
Last seen: 1 hour 15 min ago
Joined: 11/14/2013 - 22:00
Posts: 9393

Sent.

casi29061965 wrote:
Interested !
DtroitPunk72
Offline
Last seen: 2 weeks 5 days ago
Joined: 10/13/2020 - 18:13
Posts: 79
Location: Innsmouth (look it up)

Does anyone know how this will compare to the Manker MC13?

4 In him was life; and the life was the light of men.

5 And the light shineth in darkness; and the darkness comprehended it not.

JoseAsshai
Offline
Last seen: 1 month 3 weeks ago
Joined: 10/25/2020 - 12:24
Posts: 4
Location: Madrid

Interesado!

deeuubee
Offline
Last seen: 1 week 1 day ago
Joined: 12/05/2012 - 13:35
Posts: 34
Location: Hudson Valley, NY

Freeme – Can I get coupon codes for FT03 Mini SST40 & XHP50.2

I would like to buy a few of each – Thanks

KisaKot
Offline
Last seen: 1 week 1 day ago
Joined: 10/29/2020 - 13:20
Posts: 23
Location: Russia

Interested!

deeuubee
Offline
Last seen: 1 week 1 day ago
Joined: 12/05/2012 - 13:35
Posts: 34
Location: Hudson Valley, NY

Still interested. Can I get codes please.

justicemanvn
Offline
Last seen: 3 months 1 week ago
Joined: 01/21/2019 - 23:20
Posts: 31

interesting

freeme
freeme's picture
Offline
Last seen: 1 hour 15 min ago
Joined: 11/14/2013 - 22:00
Posts: 9393

 

Info shared.

Sorry for the delay as we were busy working on our site. 

deeuubee
Offline
Last seen: 1 week 1 day ago
Joined: 12/05/2012 - 13:35
Posts: 34
Location: Hudson Valley, NY

Thank you – ordered 4 Blue

freeme
freeme's picture
Offline
Last seen: 1 hour 15 min ago
Joined: 11/14/2013 - 22:00
Posts: 9393

©freemex1thedeals.com

Thank you for you support, Deeuubee!

deeuubee wrote:
Thank you - ordered 4 Blue
delete
Offline
Last seen: 1 month 3 weeks ago
Joined: 03/28/2017 - 23:42
Posts: 160

Interested

deeuubee
Offline
Last seen: 1 week 1 day ago
Joined: 12/05/2012 - 13:35
Posts: 34
Location: Hudson Valley, NY

Bummer! Just got emailed that the lights I ordered last week are out of stock.

Freeme… please light a fire under them to make more. Smile

Artiet59
Offline
Last seen: 1 hour 22 min ago
Joined: 02/25/2020 - 17:55
Posts: 1480
Location: CT, USA

Tom E wrote:

Got my greenie. Guess I didn’t read the fine print – didn’t realize it’s a UI all their own, not Anduril, no AUX LED’s around the LED.


I measured 4.2 tail amps on a 35E at 4.06V, but on a VTC5D, measured 5.2 tail amps. So, what does this tell us? Is it a FET with limited amps or just poor regulation?


Don’t think it’s a problem for the green – think it can take higher amps than the white or red?


I have been reading data sheets on all nm1 colors and they are all pretty close (+/- .75a) to each other if I recall correctly. I ordered blue, red, green and I got green, white, orange. Green is great, orange is pretty good too. I ordered blue and red nm1 on 20mm mcpcb from Neil to swap out orange and white (white sucks kindve). I’ll post pics of before and after as I will have all 5 versions at that point
g_damian
g_damian's picture
Offline
Last seen: 12 hours 18 min ago
Joined: 08/20/2017 - 06:52
Posts: 598

interested

deeuubee
Offline
Last seen: 1 week 1 day ago
Joined: 12/05/2012 - 13:35
Posts: 34
Location: Hudson Valley, NY

Freeme – 3 weeks since I ordered 4 lights. Any word on when they will ship? No information at all from Bangood.

Artiet59
Offline
Last seen: 1 hour 22 min ago
Joined: 02/25/2020 - 17:55
Posts: 1480
Location: CT, USA

deeuubee wrote:
Freeme – 3 weeks since I ordered 4 lights. Any word on when they will ship? No information at all from Bangood.

Better then AX, Who just sent me the wrong (3) ft03 mini’s and then disputed my claim saying that the led color doesn’t effect the lights performance! Never again with AX, I regret not using free-me / BG for that !

Btw I ordered red, blue, green led with corresponding body colors for two of them, and I received white, orange and green led… very frustrating. Now reflowi g the correct colors myself as AX and seller told me to pound sand! Luckily Simon sells red and blue cslnm1 on 20 mm mcpcb’s…

deeuubee
Offline
Last seen: 1 week 1 day ago
Joined: 12/05/2012 - 13:35
Posts: 34
Location: Hudson Valley, NY

I’ve had good luck so far ordering from BG.
It’s just frustrating to have a lot of money floating out there with no communication.
Even Freeme doesn’t reply to my messages.
What’s just as frustration is that they are listed now for less than I paid for them and supposed to ship in two weeks.
So either another vendor has them in stock or they’re advertising lights they know are backordered.

freeme
freeme's picture
Offline
Last seen: 1 hour 15 min ago
Joined: 11/14/2013 - 22:00
Posts: 9393

Are they marked as shipped or still in back-order status? 

deeuubee wrote:
Freeme - 3 weeks since I ordered 4 lights. Any word on when they will ship? No information at all from Bangood.
deeuubee
Offline
Last seen: 1 week 1 day ago
Joined: 12/05/2012 - 13:35
Posts: 34
Location: Hudson Valley, NY

It says :

Nov 07, 2020 15:14
Order submit. – Processing

Thank you for responding.

Just checked again: Still says Processing

Pouches say expected shipping Dec 7th

FT03 Mini says expected shipping date Nov 14th

KisaKot
Offline
Last seen: 1 week 1 day ago
Joined: 10/29/2020 - 13:20
Posts: 23
Location: Russia

Interested green with SST-40!

rchrdson
rchrdson's picture
Offline
Last seen: 3 months 1 week ago
Joined: 12/29/2020 - 00:41
Posts: 1
Location: Philippines

I have this with green nm1 emitter.. can I just replace directly the nm1 emmiter with culpm1.tg?

freeme
freeme's picture
Offline
Last seen: 1 hour 15 min ago
Joined: 11/14/2013 - 22:00
Posts: 9393

Mine just arrived!

Pages