Replacement Bulb for Fulton Flashlight

[bikenber73]

If I put this in my Fulton angle head flashlight and run it off a 26650, it should handle the voltage correct? I just need to worry about heat.
https://www.amazon.com/LiteXpress-LXB404-Upgrade-Module-Lumens/dp/B00A37QOI2/ref=sr_1_1?dchild=1&keywords=litexpress&qid=1603129670&s=home-garden&sr=1-1-catcorr

Thanks!

[xxo]

Should work, though I suggest a lower lumen LED because the Fulton’s reflector is shallow and most of those lumens would be wasted and these lights are not intended for much heat.

I run my Fulton’s on 55 lumen Nite Ize LED’s - these are rated for 2 to 6 cells, so they will also work with D cells.

[bikenber73]

@xxo

Should work, though I suggest a lower lumen LED because the Fulton’s reflector is shallow and most of those lumens would be wasted and these lights are not intended for much heat.

I run my Fulton’s on 55 lumen Nite Ize LED’s - these are rated for 2 to 6 cells, so they will also work with D cells.

Imgur: The magic of the Internet

Where did you get the spacer for the 26650 cell?
Thanks

[xxo]

I make them.

3D Printed Battery Adapters

[image] These adapters are 3D printed in PETG or Nylon filament (not the more common PLA which is not as resistant to heat and solvents) with solid brass and stainless hardware where needed. Adapters with * have built in mechanical reverse polarity protection and require a button top or a raised positive contact. Protected cells are recommended. *Edit: Most of the adapters have been sold elsewhere, I still have a few if you are interested please PM me for prices and details.* Thanks! https…

[bikenber73]

Thats awesome!

[snakebite]

i also print various adapters.
renders alkaleaks obsolete!
btw my old angleheads have metal reflectors and bakelite retainers.
i have done a few hotwires with them.
newer ones may be plastic.