WTS: All lights and accessories sold!

28 posts / 0 new
Last post
Lightfan
Offline
Last seen: 7 hours 2 min ago
Joined: 02/24/2012 - 23:50
Posts: 87
Location: Lake St. Louis, MO
WTS: All lights and accessories sold!

Here is a varied selection of budget flashlights and accessories for sale. I cleaned every light's threads with white vinegar and lightly lubed the threads with DeoxIT D100L (red).

This sale is for the US only, and all prices include first-class USPS shipping. I only use PayPal currently, so please PM me for my PayPal address. Thank you for your interest!

UPDATE: I haven't posted any items for sale in a while, so I overlooked linking the pictures to the original ones. If someone would like more/bigger pictures, please let me know. Thank you. 

 

 

 


 ***SOLD***

Fenix L2D CE $24 Sold to spoonrobot: This CW 2AA light is in excellent condition. I will include an aftermarket clip along with the following 3 Fenix diffusers: AD102-W white diffuser, AD102-R diffuser (which has a crack but still works as expected), and AD401 diffuser lens (which has some black permanent marker on the sides but still works as expected).

 

 

FourSevens Atom 360 Headlamp Kit $13 Sold to jon_slider: I just never used this kit since I prefer dedicated headlamps, so the kit is in excellent condition. Included are the headband, cradle (with neodymium magnet), 3 fitted adapters, and 2 pairs of O-rings in different sizes.

 

 

Streamlight AAA Bundle $25 Sold to Renthal:  These 2 Stylus Pros and 1 MicroStream are in good condition. They are the older models with the three-piece bodies and one-way clips. I removed the heads (by heating the glue) so I could install FourSevens Preon and Fenix L0D heads to increase the Streamlights' versatility, so they are ready for the next mod project. The blue Stylus Pro has "MSI HVAC" printed on its body.

 

  

 

FourSevens Preon Bundle $18 Sold to Renthal: This is the Gen1 CW version. When tightened on the 2 red bodies, the head (which does work) does not make full contact, so it doesn't turn on. I did get the light to power on when putting a small piece of aluminum foil on the threads before installing the head, so it appears to be a contact issue, which I recall hearing from other users. The head does work on other lights (like the Streamlights in this sale, hint, hint wink), and it may work on other Preon bodies. The black body appears to be a later version in that the red tailcaps do not fully screw onto the body.

 

  

 

Icon Rogue 1 $13 $11 $10 Sold to jon_slider: This CW AA light is in good condition. The plastic lens has a couple scratches, which is shown in the 2nd image. Two lanyards are included.

 

  

 

NiteCore D20 ($8 $6 with additional purchase) Sold to jon_sliderThis 2AA light was updated (by another user) with a warmer emitter, but I don't recall which one. It used to work as designed, but I noticed at some point the light wouldn't turn off when the head is fully screwed on. I don't know if this construction is normal, but I found the piston sticks out of the body (see 3rd image) when the tail's retaining ring is fully tightened, so the head must be unscrewed slightly for the light to turn off. So, I hope someone can fix it or just use it for parts. I no longer have the clip.

 

 

FourSevens QPA $23 $21 $19 Sold to buck91: This CW AA/14500 light is in good condition with some nicks in the anodizing at the bezel and tailcap. A sticker on the box notes the emitter is an XP-G Gen2. The light is shown with a forward clicky, but if you would prefer the reverse clicky, I will include it instead. The standard clip is installed, but I will also include a deep-carry clip. The standard accessories (holster, lanyard, FingerGrip, 2 extra O-rings, and manual) are also included in the worn box.

     

 

Fenix E01 Combo $30 $27 Sold to aginthelaw: I think the black model of this discontinued and renowned AAA light is the 10-lumen version because it doesn't appear as bright as the olive version, which may be 13 lumens.

Both lights are in very good condition with a few small areas of missing anodizing. I lightly sanded each light's LED and "reflector" with steel wool to remove artifacts from the beams, which can be seen in the beamshots image. In that image (olive at left, black at right), the lights are about 1 foot from the wall, and the beams actually have blue in them, which can't be seen via the pic taken via the auto feature on my phone. The black E01's beam also appears more neutral, but that's due to the limitation of my phone's camera.

 

 

 

 

ThruNite Green Ti ($6 $5 with additional purchase) Sold to aginthelaw: This CW AAA light is in excellent condition and is the 2-mode version with 3 and 60 lumens. The foam donut in the bezel came off, so I reattached it with epoxy.


Streamlight Stylus Pro with Green LED ($5 $3 with additional purchase) Sold to aginthelaw: This orange-camo version is in good condition. This is also an older model with the three-piece body and one-way clip. I did remove the head (by heating the glue) so I could install FourSevens Preon and Fenix L0D heads to increase the Streamlight's versatility, so it is also ready for the next mod project. The body has a tacky feel, but I think that is inherent of the camo pattern.
 

NiteCore HB02 Headband ($5 $4 with additional purchase) Sold to aginthelaw: This versatile headband is in excellent condition.

 

FourSevens Quark Smart QSL-X $23 $21 $19 Sold to JermsMalibu: This CW CR123A/RCR123A light is in excellent condition. I will include the holster, lanyard, and an aftermarket clip.

    

Thorfire TK01 ($6 with additional purchase) Sold to Renthal: This is a nice AAA twisty light and is in excellent condition. It has one mode (85 lumens) and uses a high-CRI Nichia 219C.

Edited by: Lightfan on 01/01/2021 - 19:44
jon_slider
jon_slider's picture
Offline
Last seen: 5 hours 2 min ago
Joined: 09/08/2015 - 12:20
Posts: 4102
Location: The Land of Enchantment

> FourSevens Atom 360 Headlamp Kit $13:

I will take it, please PM me your paypal info

fonfan
Offline
Last seen: 11 hours 19 min ago
Joined: 08/13/2015 - 19:44
Posts: 242
Location: RF SPb

Quote:
I’ll take

FourSevens Preon Bundle $18:


cancelled

WANTED Zebralights. My flashlights

fonfan
Offline
Last seen: 11 hours 19 min ago
Joined: 08/13/2015 - 19:44
Posts: 242
Location: RF SPb

Quote:
Add ThruNite Green Ti ($6 with additional purchase):

cancelled

WANTED Zebralights. My flashlights

spoonrobot
Offline
Last seen: 10 hours 1 min ago
Joined: 02/10/2016 - 14:01
Posts: 52

I will take this PM incoming

Quote:
Fenix L2D CE $24
Renthal
Offline
Last seen: 7 hours 37 min ago
Joined: 08/28/2019 - 16:33
Posts: 18

Ill take the streamlights, the preon and the thorfire tk01.

Lightfan
Offline
Last seen: 7 hours 2 min ago
Joined: 02/24/2012 - 23:50
Posts: 87
Location: Lake St. Louis, MO
Renthal wrote:
Ill take the streamlights, the preon and the thorfire tk01.

Thank you, Renthal! Please PM me for PP address.

Lightfan
Offline
Last seen: 7 hours 2 min ago
Joined: 02/24/2012 - 23:50
Posts: 87
Location: Lake St. Louis, MO

To the top with price drops. Fenix E01 has been withdrawn to enable sale elsewhere.

Lightfan
Offline
Last seen: 7 hours 2 min ago
Joined: 02/24/2012 - 23:50
Posts: 87
Location: Lake St. Louis, MO

To the top with more price drops along with addition of Fenix E01 combo.

jon_slider
jon_slider's picture
Offline
Last seen: 5 hours 2 min ago
Joined: 09/08/2015 - 12:20
Posts: 4102
Location: The Land of Enchantment

> Icon Rogue 1 $13 $11 $10: 
> NiteCore D20 ($8 $6 with additional purchase):

I will take both please

Lightfan
Offline
Last seen: 7 hours 2 min ago
Joined: 02/24/2012 - 23:50
Posts: 87
Location: Lake St. Louis, MO

Thank you, Jonathan! I will ship the Icon and NiteCore tomorrow.

Price drop on the Fenix E01 combo.

buck91
buck91's picture
Offline
Last seen: 3 hours 57 min ago
Joined: 07/29/2016 - 08:21
Posts: 572
Location: Michigan

For $19 you win, I’ll take it.

Quote:
FourSevens QPA $23 $21 $19

Do you happen to have info on the UI, though? Oddly I’m striking out on finding a decent write up on it.

Slayer1
Slayer1's picture
Offline
Last seen: 1 day 20 hours ago
Joined: 03/03/2016 - 02:59
Posts: 402
Location: Singapore

FourSevens Quark Smart QSL-X, any link for the software download?

Lightfan
Offline
Last seen: 7 hours 2 min ago
Joined: 02/24/2012 - 23:50
Posts: 87
Location: Lake St. Louis, MO

buck91 wrote:
For $19 you win, I'll take it.
Quote:
FourSevens QPA $23 $21 $19
Do you happen to have info on the UI, though? Oddly I'm striking out on finding a decent write up on it.

 

Well, thank you very much, buck91. It's the same model shown here: https://www.youtube.com/watch?v=U0H-5fT42Fs

Its UI (below) is pulled from here: https://www.knifecenter.com/item/FSQPAAE/FOURSEVENS-Quark-Pro-AA-Gen-2-Cool-White-LED-Flashlight-132-Max-Lumens

 

One thing I realized I overlooked mentioning is that this model has the common issue of a slight preflash when turning it on in moonlight (loosened bezel), so I'd understand if you change your mind.

 

"Operating your Quark Pro AA is simple. Make sure its batteries are inserted with the positive side (+) toward the head. Ensure the bezel (the 'head' of the light) and tailcap are tightened, then depress the tailcap button fully so that it 'clicks' and the light turns on.

The two most commonly used modes are Max and Moonlight, the highest and lowest modes. To access Max, you simply tighten the bezel. To access Moonlight, you just loosen the bezel a half-turn. That's it.

You can also cycle through the Quark's other modes just as easily. Lightly depress the button momentarily (you don't need to 'click' it off) and the output will switch to the next mode. The mode sequence is determined by whether the bezel is tightened or loosened:

Loosened Bezel: Moonlight -> Low -> Medium -> High -> SOS -> Beacon

Tightened Bezel: Max -> Strobe

Once the Quark has been turned off for at least three seconds, it will revert to the first level of output in the sequence, either Moonlight or Max.

Lightfan
Offline
Last seen: 7 hours 2 min ago
Joined: 02/24/2012 - 23:50
Posts: 87
Location: Lake St. Louis, MO
Slayer1 wrote:
FourSevens Quark Smart QSL-X, any link for the software download?

I never downloaded the software, but it is Apple and referenced here: https://download.cnet.com/FOURSEVENS-Smart-Flashlights/3000-2094_4-76575...

buck91
buck91's picture
Offline
Last seen: 3 hours 57 min ago
Joined: 07/29/2016 - 08:21
Posts: 572
Location: Michigan
Lightfan wrote:

buck91 wrote:
For $19 you win, I’ll take it.
Quote:
FourSevens QPA $23 $21 $19
Do you happen to have info on the UI, though? Oddly I’m striking out on finding a decent write up on it.

 


Well, thank you very much, buck91. It’s the same model shown here: https://www.youtube.com/watch?v=U0H-5fT42Fs


Its UI (below) is pulled from here: https://www.knifecenter.com/item/FSQPAAE/FOURSEVENS-Quark-Pro-AA-Gen-2-Cool-White-LED-Flashlight-132-Max-Lumens


 


One thing I realized I overlooked mentioning is that this model has the common issue of a slight preflash when turning it on in moonlight (loosened bezel), so I’d understand if you change your mind.


 


“Operating your Quark Pro AA is simple. Make sure its batteries are inserted with the positive side (+) toward the head. Ensure the bezel (the ‘head’ of the light) and tailcap are tightened, then depress the tailcap button fully so that it ‘clicks’ and the light turns on.


The two most commonly used modes are Max and Moonlight, the highest and lowest modes. To access Max, you simply tighten the bezel. To access Moonlight, you just loosen the bezel a half-turn. That’s it.


You can also cycle through the Quark’s other modes just as easily. Lightly depress the button momentarily (you don’t need to ‘click’ it off) and the output will switch to the next mode. The mode sequence is determined by whether the bezel is tightened or loosened:


Loosened Bezel: Moonlight -> Low -> Medium -> High -> SOS -> Beacon


Tightened Bezel: Max -> Strobe


Once the Quark has been turned off for at least three seconds, it will revert to the first level of output in the sequence, either Moonlight or Max.

Thanks, I figured it was something like that but I just couldn’t find it. I’m still in, PM in bound;)

aginthelaw
aginthelaw's picture
Offline
Last seen: 2 hours 35 min ago
Joined: 09/30/2014 - 21:31
Posts: 1101
Location: noo joisey

I’ll take the 2 fenix e01’s and
ThruNite Green Ti ($6 $5
Streamlight Stylus Pro with Green LED ($5 $3
NiteCore HB02 Headband ($5 $4

never fear shadows…it means a light shines nearby

Lightfan
Offline
Last seen: 7 hours 2 min ago
Joined: 02/24/2012 - 23:50
Posts: 87
Location: Lake St. Louis, MO

All sold items have been shipped, so I thank you all for helping give these items new homes.

Now, just the Smart QSL-X remains for sale. Who wants to complete their 2020 with this neat light? Party

JermsMalibu
Offline
Last seen: 1 day 1 hour ago
Joined: 01/22/2019 - 01:17
Posts: 39
Location: Salem Oregon

I’ll take the Quark Smart QSL-X for $19 if no one has taken it.

Lightfan
Offline
Last seen: 7 hours 2 min ago
Joined: 02/24/2012 - 23:50
Posts: 87
Location: Lake St. Louis, MO

JermsMalibu, it’s yours! Thank you for the payment.

All lights and accessories have been sold, so thank you again to everyone! I love this community. Thumbs Up

jon_slider
jon_slider's picture
Offline
Last seen: 5 hours 2 min ago
Joined: 09/08/2015 - 12:20
Posts: 4102
Location: The Land of Enchantment

safe arrival of the Nitecore D20, thank you Very Much!

I unscrewed the tail ring a couple of turns, and now the light turns off and on normaly, with the head tight.

The LED is quite nice too
very happy with it

.

also confirm receipt of the Carrot Peeler.. LOL

its a real Icon.. Wink of flashlight history, cool white, low cri, two modes, plastic lens, PWM, and all

weve come a long way baby..

aginthelaw
aginthelaw's picture
Offline
Last seen: 2 hours 35 min ago
Joined: 09/30/2014 - 21:31
Posts: 1101
Location: noo joisey

Got my package. the lights were practically new. everything was perfect. The headband wasn’t a totally perfect fit for my hc50 but it will work in a pinch. Thanks!

never fear shadows…it means a light shines nearby

Lightfan
Offline
Last seen: 7 hours 2 min ago
Joined: 02/24/2012 - 23:50
Posts: 87
Location: Lake St. Louis, MO

jon_slider wrote:
safe arrival of the Nitecore D20, thank you Very Much!

I unscrewed the tail ring a couple of turns, and now the light turns off and on normaly, with the head tight.

The LED is quite nice too
very happy with it

also confirm receipt of the Carrot Peeler.. LOL

its a real Icon.. Wink of flashlight history, cool white, low cri, two modes, plastic lens, PWM, and all

weve come a long way baby..

Excellent, Jonathan! Thank you for the update.

I did unscrew the D20’s tail ring enough at one point to allow the light to function as expected, but I didn’t like the ring being loose. I’m glad it works well for you, and I’m thrilled to hear the tint is better than expected, given your high-CRI preference.

I’m glad the Icon will also get used for a culinary purpose!

Enjoy, and thank you again for giving the torches a new home.

Lightfan
Offline
Last seen: 7 hours 2 min ago
Joined: 02/24/2012 - 23:50
Posts: 87
Location: Lake St. Louis, MO
aginthelaw wrote:
Got my package. A nick here and a nick there, otherwise everything’s fine. The headband wasn’t a totally perfect fit for my hc50 but it will work in a pinch. Thanks!

You are welcome, David! Thank you for the update. Enjoy!

jon_slider
jon_slider's picture
Offline
Last seen: 5 hours 2 min ago
Joined: 09/08/2015 - 12:20
Posts: 4102
Location: The Land of Enchantment

Lightfan wrote:
I did unscrew the D20’s tail ring enough at one point to allow the light to function as expected, but I didn’t like the ring being loose.

I had a similar concern,.

Then checked, and found the pill could be tightened down deeper.

That let me retighten the tail ring a bit more, while still letting the light work to turn off normally.

Im guessing the pill had unscrewed simply from the battery friction when changing batteries. And I learned the tailring can not be tightened down fully, or the light wont turn off.

both the tail ring and pill were relatively easy to rotate, Ive chosen not to change that yet. Because Im preserving the option to swap the LED.

Ive become more tolerant of differences lately. Im even appreciating the cool white carrot grater, simply for its histerical significance.. Wink

I envision myself in full ninja mode, ready to flash and dash, the SureFire way.. Party

you have brought many smiles into my world, thank you for your generosity in sharing these lights with me Smile

Lightfan
Offline
Last seen: 7 hours 2 min ago
Joined: 02/24/2012 - 23:50
Posts: 87
Location: Lake St. Louis, MO

Jonathan, I’m glad you were able to finagle the D20 more to enable it to work more per its intended design.

I’m also thrilled about having had the opportunity to contribute to your happiness via all the lights.

Looking forward to pics of any “full ninja mode” moments! Wink

jon_slider
jon_slider's picture
Offline
Last seen: 5 hours 2 min ago
Joined: 09/08/2015 - 12:20
Posts: 4102
Location: The Land of Enchantment

Lightfan wrote:
Looking forward to pics of any “full ninja mode” moments! Wink

LOL!

Three Snow Ninjas,

Im the invisible one, in the middle
wearing the D20 Light Sabre, crossdraw Davie

Lightfan
Offline
Last seen: 7 hours 2 min ago
Joined: 02/24/2012 - 23:50
Posts: 87
Location: Lake St. Louis, MO

jon_slider wrote:
Lightfan wrote:
Looking forward to pics of any “full ninja mode” moments! Wink

LOL!

Three Snow Ninjas,

Im the invisible one, in the middle
wearing the D20 Light Sabre, crossdraw Davie

I almost see you, Ninjathan! Glad to know you’ve got the other 2 ninjas’ backs. Silly