JAXMAN M3, our first 21700 light

22 posts / 0 new
Last post
jaxman
jaxman's picture
Offline
Last seen: 3 days 2 hours ago
Joined: 04/24/2015 - 02:01
Posts: 328
Location: 中国
JAXMAN M3, our first 21700 light






We found that there are available for the good 21700 batteries, such as LG and Samsung. So we developed the M3 for 21700 users.
below is our store webpage, you can find more details.
Our store on Aliexpress

g_damian
g_damian's picture
Offline
Last seen: 7 hours 2 min ago
Joined: 08/20/2017 - 06:52
Posts: 584

Hi Jaxman, nice looking flashlight Thumbs Up

  • What is the driver diameter?
  • What are maximum height and diameter of battery?
  • Is anything glued?
  • Is PWM used by the driver?
  • Can it be ordered without ceramical beads? Or at least less aggressive bezel?
  • Can modes be programmed differently? I mean e.g. 0.02, 1, 3, 4A are probably more like one low mode and three high modes. I’d like something like 0.02, 0.4, 1.3, 4A.
  • Does the driver have memory?
  • Will it be possible to buy only host?
Lumeniac
Lumeniac's picture
Offline
Last seen: 1 hour 23 min ago
Joined: 12/19/2016 - 13:47
Posts: 682
Location: Russia

my congratulations

 

what`s about UI, color temperature and stabilization? 

 

max004
Offline
Last seen: 3 days 5 hours ago
Joined: 01/28/2021 - 04:57
Posts: 10

g_damian wrote:
Hi Jaxman, nice looking flashlight Thumbs Up
  • What is the driver diameter?
  • What are maximum height and diameter of battery?
  • Is anything glued?
  • Is PWM used by the driver?
  • Can it be ordered without ceramical beads? Or at least less aggressive bezel?
  • Can modes be programmed differently? I mean e.g. 0.02, 1, 3, 4A are probably more like one low mode and three high modes. I’d like something like 0.02, 0.4, 1.3, 4A.
  • Does the driver have memory?
  • Will it be possible to buy only host?

I just received the Jaxman M3 (xpl hi 2800k) and conducted some rough tests. I found abnormal noise when shaking when using the Samsung 30T flat-head battery. Using the camera, I found PWM in 1A. The overall quality is very good.

jaxman
jaxman's picture
Offline
Last seen: 3 days 2 hours ago
Joined: 04/24/2015 - 02:01
Posts: 328
Location: 中国

hi so many quesitons.
driver OD. is 20mm at present. while it can be enlarge in future.
the battery tube is 22mm inner diameter. due to all soft springs in both side, so the battery is not a problem.
No, no glue.
No ,not a PWM power adjusting.
We now have not other kind of bezel. while it is not a problem. we will made some without aggressive type.
Programing MCU scripts is too complex for me. I dont want do such kind of light. Never.ever.
Yes ,with memory function.
As Host, I think it is ok for BLFers for a small qty. mainly because it is too trouble to package, and aftersale affairs are also a main considering. We now are near to the Spring Festival of the traditional Lunar year.

Happy new year.

jaxman
jaxman's picture
Offline
Last seen: 3 days 2 hours ago
Joined: 04/24/2015 - 02:01
Posts: 328
Location: 中国

Thank you.
simple UI. As tint, we have kinds of. What means stabilization?

Unheard
Unheard's picture
Online
Last seen: 7 min 34 sec ago
Joined: 01/16/2019 - 11:38
Posts: 1602
Location: Germany

jaxman wrote:

Programing MCU scripts is too complex for me.

But not for some BLFers Big Smile .

Don’t take me too serious regarding your light, but I’d love if manufacturers would document which lines of the MCU do what. Makes writing a new firmware an option if in-system programming/flashing is possible. Documentation saves reengineering efforts and gives the manufacturers a selling argument.

Happy new year.

Smile, you cannot kill them all.

jaxman
jaxman's picture
Offline
Last seen: 3 days 2 hours ago
Joined: 04/24/2015 - 02:01
Posts: 328
Location: 中国

Thanks. new year holidays are run out..
Start to make flashlights…
Have a nice day!

Rusty Joe
Rusty Joe's picture
Offline
Last seen: 3 hours 48 min ago
Joined: 07/24/2011 - 00:22
Posts: 3388
Location: Houston, TX

Regulated?

sp5it
sp5it's picture
Online
Last seen: 20 sec ago
Joined: 12/25/2012 - 07:51
Posts: 1203
Location: Poland

Fast thermol? You rulezzz

50.2 shitty led. Bad tintshift.
Down the drain…
Mike

Think of how stupid the average person is, and realize half of them are stupider than that. George Carlin

 Anyone offended by my signature please fill Complaint Form. Thank you.

 If a lot of people listen to Slayer, the world would be a better place to live" - Tommy Wiseau

Rusty Joe
Rusty Joe's picture
Offline
Last seen: 3 hours 48 min ago
Joined: 07/24/2011 - 00:22
Posts: 3388
Location: Houston, TX

What is the range when equipped with each emitter?

Caleb
Caleb's picture
Offline
Last seen: 7 hours 41 min ago
Joined: 03/13/2016 - 01:28
Posts: 717

Excellent! Congratulations!

I love that you offer a forward switch option.

Have you considered offering Samsung LH351D hi cri LED?

buck91
buck91's picture
Offline
Last seen: 1 hour 28 min ago
Joined: 07/29/2016 - 08:21
Posts: 575
Location: Michigan

Interesting light. Seems like the LH351D would be a better fit than the 219C, higher amps and higher output. I’m generally a fan of 3000-4000k so take that for what it is.

Caleb
Caleb's picture
Offline
Last seen: 7 hours 41 min ago
Joined: 03/13/2016 - 01:28
Posts: 717

Excellent! Congratulations!

I love that you offer a forward switch option.

Have you considered offering LH351D hi cri LED?

JaredM
JaredM's picture
Offline
Last seen: 6 hours 21 min ago
Joined: 10/31/2011 - 13:33
Posts: 1486
Location: Pittsburgh, Pennsylvania
Rusty Joe wrote:
What is the range when equipped with each emitter?

JaredM
JaredM's picture
Offline
Last seen: 6 hours 21 min ago
Joined: 10/31/2011 - 13:33
Posts: 1486
Location: Pittsburgh, Pennsylvania

I like the form factor. Thumbs Up
Just wish the bezel wasn’t so thick! You could fit a much larger reflector in there.

Lightbringer
Lightbringer's picture
Offline
Last seen: 7 hours 8 min ago
Joined: 08/30/2016 - 14:12
Posts: 13756
Location: nyc

Noice. Reminds me of Solarforce L2Ms and such.

And I like the ceramical beads. I’d definitely keep ‘em. Were just discussing glass brokers, too.

09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0

jaxman
jaxman's picture
Offline
Last seen: 3 days 2 hours ago
Joined: 04/24/2015 - 02:01
Posts: 328
Location: 中国

hi as to the range, I am feeling puzzled. My opion is this:

Or see my facebook.

jaxman
jaxman's picture
Offline
Last seen: 3 days 2 hours ago
Joined: 04/24/2015 - 02:01
Posts: 328
Location: 中国

hi I m trying Nichia 18w high CRI led.. Big Smile

jaxman
jaxman's picture
Offline
Last seen: 3 days 2 hours ago
Joined: 04/24/2015 - 02:01
Posts: 328
Location: 中国

In fact the bezel is not a fat one. And we design ed the inner surface to be a very fit size.
And the reflector is 28mm OD. we think it is a propper size for a Max. OD 35mm flashlight.
But after all it will be fatter (thicker) than normal light . while just a bit of.

Lux-Perpetua
Offline
Last seen: 1 day 4 hours ago
Joined: 03/01/2018 - 04:39
Posts: 2759
Location: at the end of the light beam

Can you please elaborate on the driver in M3?

Many people here are spoiled by constant current drivers (linear or buck). LOL

JaredM
JaredM's picture
Offline
Last seen: 6 hours 21 min ago
Joined: 10/31/2011 - 13:33
Posts: 1486
Location: Pittsburgh, Pennsylvania
jaxman wrote:
hi I m trying Nichia 18w high CRI led.. Big Smile

B35AM? LOL