Used but not excessively abused. This is a fun light to play with, relatively simple to swap out mounted emitters. The 35mm Gaggione optic is geared towards a nice, wide-leaning throw.
- Optic is scratched in places
- Gaggione optic is inexpensive to replace (~4 USD)
- 6-32 x 0.5” postive hex-head screw is stripping
- Easily replaced at your local hardware store
- No MCPCB installed: Will come with three used and pulled MCPCB on the side
- LH351D 5700K - Kaidoman
- SST-20 4000K - Mtn Electronics (as delivered from Fraz Labs)
- KW CULPM1.TG - Convoy
- Missing tailcap spring - Added a spring as a workaround
- The original spring is somewhere around the house
- The original spring is somewhere around the house
- Exterior of tailcap scratched by needle nose pliers
- Rewrapped (by me) Moli P42A
- Negative has a dimple; cell purchased within last 60 days
- Battery compartment o-ring (nitrile) replaced with Viton 75
- Supplied with two extra brass pills and one QTC (as delivered from Fraz Labs)
Will ship USPS CONUS (COntinental United States) only. On my dime and my time (this week or next). Sorry, international members: I’ll think of something for you all next time. If I can find the tailcap spring, I’ll ship it to you. Else, I am sure the fine folks at Fraz Labs will take care of you. Otherwise, cut the replacement spring that I added (tested to work without issue). Again, not posting as new, but rather used though not abused. First to post takes it all.