WTS: Klarus 360X3vn SLICED XHP70.2 by Vinh/Skylumen LNIB Conus

3 posts / 0 new
Last post
mountainair26
mountainair26's picture
Offline
Last seen: 18 hours 55 min ago
Joined: 09/10/2016 - 18:10
Posts: 260
WTS: Klarus 360X3vn SLICED XHP70.2 by Vinh/Skylumen LNIB Conus

LNIB Klarus 360X3 modded by Vinh/Skylumen with a 4000k XHP70.2 with shaved dome/sliced sides or "cut edge" I think he calls it. Battery and all accessories includedThis is like the dome "slice 'n dice" you see here on BLF. Vinh previously only sliced the top off emitters, not the sides, so I sent him some threads from Zozzv6, DB Custom, and everyone else here who pioneered doing that and found out that it improved output and tint over only slicing off the top: https://budgetlightforum.com/node/65559

$100 OBO shipped to CONUS. - International shipping possible for what it costs.

Asking price is much less than I paid, and is lower than the street cost of the stock light now (~$80-$90) plus the cost of an emitter swap and dome slice without doing any work. 

The white mark on the bottom of the head must be dust from my hands or some reflection because it's not there. The light has zero blemishes. No surprises, or I'll make it right if something isn't exactly like I described it.

Never been carried or used for more than 90 seconds on and off in my smoke-free home and shows it.

The beam is very useful in all modes, with a combo of flood and more throw than you would expect.  4000k turned into ~ 3600k by comparison to other known tint lights. The slice job tightens the hot spot for over 100m more throw over stock light (see testing from Vinh vs. stock numbers below on Klarus website.) Wish I could keep it but I have too many lights that I don't ever use and this one needs to be put to work, not sitting in a box. I can take outdoor beam shots if you wish.

Here's some quick beam shots from 5-6 yards away on low (left) and high/turbo (right) from my phone during daylight. There's lots of sun coming through the windows, but I just wanted to show the tight but rather large hotspot that makes this a great intermediate beam between flooder-only and pencil thrower. The beam shots look warmer than the light really appears, and there is NOT egg-yolk in the beam due to the light OP reflector. It's just the best my phone camera could do, if you want more beam shots please PM.:

Klarus website with list of features:

https://www.klaruslight.com/Products/360XSeries/360X3.html

Comes with two cards from Vinh from original purchase and when I sent it back to slice 'n dice the xhp-70.2 and do ANSI spec testing. All the original goodies, holster, klarus lanyard, instructions etc. and 3200mah Klarus battery. Like-new aside from cycling the battery twice in my charger like I do with every battery. Would be an excellent duty light, hunting light (optional remote tail switch for gun mount here: https://www.amazon.com/Klarus-Multi-Function-Pressure-Tactical-Flashligh... ) or general purpose. Lived 99% of it's life in the box on a shelf except for white wall hunting for a few minutes after I received it. 

I think asking price is fair, but it can't hurt to make an offer. Worst I can say is "no thanks". Please pm with questions or anything.

Edited by: mountainair26 on 04/09/2021 - 13:39
mountainair26
mountainair26's picture
Offline
Last seen: 18 hours 55 min ago
Joined: 09/10/2016 - 18:10
Posts: 260

Sunday bump.

mountainair26
mountainair26's picture
Offline
Last seen: 18 hours 55 min ago
Joined: 09/10/2016 - 18:10
Posts: 260

Bump – price drop